UTG CQB A3 Mount For any AR Flat Top Or AR-15/M16 V-Match Upper Receiver GI
Standard A2 Rear Sight Assembly with windage and elevation Integral Riser Mount.
Precision Machined from Heavy Duty Aircraft Grade Aluminum Alloy with Black Hard
Anodizing. Complete with Dual Aiming Apertures and Precision Windage/Elevation
Adjustment Optimal 0.5" Riser Platform for Close Synchronization with Dot Sights
& Other Applications. Convenient and Solid Locking on All AR Flat Tops.
Total 10 Picatinny Slots on the Riser. Limited Lifetime Warranty.
A3 AR Flatop GI A2 Rear Sight Assembly With Integral Riser Mount
CQB
A3 Mount For any AR Flat Top or V Mach upper
Precision Windage/Elevation
Adjustment
Made From Aircraft Grade Aluminum Alloy
Precision
Windage/Elevation Adjustment
Give Closer Synchronization With Dot Sights
Optimal 0.5" Height
Solid Locking On All Ar Flat Tops
10
Picatinny Slots On The Riser
Pieces: 1
Rail Type: Picatinny/Weaver
No. Of Rails: 1
Length: 7 Inch
Width: 1.7 Inch
Height:
1.7 Inch
Limited Lifetime Warranty
| Regular Price: | $ 69.99 / Each |  | | Sale Price: | $ 42.00 / Each | | You Save: | $ 27.99 / Each |
| |
| |
Compact Bright 35 Lumens Tactical Flashlight With Fully Adjustable Green Laser Sight Highly Visible In All Light Conditions Range 500m. Comes with 30mm Scope Tube Mount That Has Two Offset Picattinny Style Rails For Mounting Light & Laser Sight. One Year Limited Warranty. ASFLG30.
Laser Spec
Shock Proof
Water Resistant
Fully Adjustable
Laser Wavelength: 532 nm
Laser Maximum Output: <5 mw
Operating Voltage: 3V DC
Battery type: CR123A lithium
Line Width: <0.1 nm
Beam Divergence: <1mrad
Beam diameter: <1 mm
Operation Current: <300mA
Made From Hard Anodized Aluminum
Operating Temperature: 59 - 95 Degrees Fahrenheit
Dimensions H 2.6" x W 5.4" x L 3.25"
Range 500m
Flashlight Spec
Shock Resistant
Water Resistant
Voltage 3V
Max Lumen 35 Lumens
Battery Operating Time 90 Minutes
Made From Hard Anodized Aluminum
Focus Preset
( We suggest Extra CR123A 3Volt Lithium Batteries For Flashlight Item # 123A Batteries )
| Regular Price: | $ 99.95 / Each | | | Sale Price: | $ 68.95 / Each | | You Save: | $ 31.00 / Each |
| |
|
Compact Bright 35 Lumens Tactical Flashlight With Fully Adjustable Green Laser Sight Highly Visible In All Light Conditions Range 500m. Comes with 1" Scope Tube Mount That Has Two Offset Picattinny Style Rails For Mounting Light & Laser Sight. One Year Limited Warranty. ASFLG1.
Laser Spec
Shock Proof
Water Resistant
Fully Adjustable
Laser Wavelength: 532 nm
Laser Maximum Output: <5 mw
Operating Voltage: 3V DC
Battery type: CR123A lithium
Line Width: <0.1 nm
Beam Divergence: <1mrad
Beam diameter: <1 mm
Operation Current: <300mA
Made From Hard Anodized Aluminum
Operating Temperature: 59 - 95 Degrees Fahrenheit
Dimensions H 2.6" x W 5.4" x L 3.25"
Range 500m
Flashlight Spec
Shock Resistant
Water Resistant
Voltage 3V
Max Lumen 35 Lumens
Battery Operating Time 90 Minutes
Made From Hard Anodized Aluminum
Focus Preset
( We suggest Extra CR123A 3Volt Lithium Batteries For Flashlight Item # 123A Batteries )
| Regular Price: | $ 99.95 / Each | | | Sale Price: | $ 68.95 / Each | | You Save: | $ 31.00 / Each |
| |
| |
Mosin Nagant scout rifle scope mount Precision machined from aircraft grade aluminum for maximum strength features double locking system with zero gaps tight tolerances for a strong secure fit, excellent zero retention capabilities for all accessories installed on the two side tactical rails. This mount has been intensely tested for extreme performance. Features two steel adapters to fit on rear sight for full length and carbine Mosin Nagant rifles. Extended top rail with 17 slots for flexible eye relief adjustment. The two tactical side rails are fully removable for shooter options and have 12 slots for additional accessories such as lasers and tactical flash lights . Friendly simple installation with no gunsmith required. Turn your old Mosin Nagant rifle into a long range sniper hunting rifle great for hunting. Fits Russian, Hungarian, Chinese, Polish, and finnish models including: 38, 44, M28, 53, M27, M28 models 91, 91/30, 91/38, 91/59. Limited lifetime warranty.
| Regular Price: | $ 59.95 / Each | | | Sale Price: | $ 27.97 / Each | | You Save: | $ 31.98 / Each |
| |
|
Shotgun Tactical Scope Mount For Remington 870, shotguns and Variants.
Mount wrap around the top of the shotgun receiver. Easy To Install the factory
trigger pins are replaced by internally thread steel pins to both sides of the
saddle mount and Bolted. Saddle mount is hard anodized for a rugged surface
finish. Precision machined from air craft grade aluminum for maximum strength.
Low profile with see thru feature and V cut on the top rail with 14
weaver/picatinny slots on top for easy scope mounting. Simple and friendly
installation no gunsmith required. Solid locking features for a strong sure
tight fit. Limited lifetime warranty.
Will not fit the Remington 20
gauge or 11-87.
| Regular Price: | $ 49.99 / Each | | | Sale Price: | $ 27.49 / Each | | You Save: | $ 22.50 / Each |
| |
| |
Universal Tri-Rail Barrel Mount Complete with Tactical Laser Clamping
Feature - Each Rail with 2 Slots you can mount tactical flashlight, tactical
laser, hand grip. Works great with all rifles, Remington 7600, SKS Rifles,
AR-15, M-16, AK 47, Romanian AK Draco Pistol, Ruger 10/22, Ruger Mini-30/14
Remington 7600 ect. Mil-Spec Rail.
Lifetime Warranty Leapers.
| Regular Price: | $ 59.95 / Each | | | Sale Price: | $ 12.49 / Each | | You Save: | $ 47.46 / Each |
| |
|
Heavy Duty Universal Tri-Rail Barrel Mount Complete with Laser Clamping
Feature - Each Rail with 5 Slots Works great with all rifles, SKS Rifles, AR-15,
M-16, AK 47, 10/22 ect. It clamps on your weapons barrel to add a tri-rail mount
for lasers, lights, sights or scopes. Includes all hardware. No gunsmithing.
Mil-Spec Rail.
Lifetime Warranty.
| Regular Price: | $ 69.00 / Each | | | Sale Price: | $ 19.97 / Each | | You Save: | $ 49.03 / Each |
| |
| |
AR-15 Deluxe Triple Mount / Tri-Rail Barrel Mount with Barrel Adaptor set mount goes foward of front sight comes with Tri-Rails Picatinny Mounts. Designed to fit on the standard barrel of the M4, M15, M16 series rifles. The Deluxe Tri-Rail Barrel Mount comes complete with barrel 2 adaptors for 2 barrel diameters. It has a stabilizing design for rock solid fit. Takes Optional Push Lock/Release Quick-Detach Swivel (1 1/4"). TriRail Barrel Mount Works great with most rifles, SKS Rifles, AR-15, M-16, AK 47, ect. Can attach Flash Lights, Lasers, Small Accessories to rails. Lifetime Warranty.
Make sure you measure your barrel.
The mount will fit without Adapter: 0.87"~0.90 Diam Barrels
With Big Adapter: 0.73~0.75 Diam
With Small Adapter: 0.69~0.71 Diam
Fits HBar and M4 style barrels up too 0.90" diameter if your barrel is biger it will not work.
Will not work on BULL BARRELS (0.9375"), SP1 barrels.
Will not fit Armalite models with Barrels over 0.90 Diam.
We Have Deluxe QD Swivel - 1 1/4" Wide for Tri-Rail Barrel Mount Item # TL-QDSW18
| Regular Price: | $ 59.95 / Each | | | Sale Price: | $ 26.00 / Each | | You Save: | $ 33.95 / Each |
| |
|
Attaches to the carry handle of AR-15, M-16, M4A1, rifles and clones. One-piece machined construction with see-through design. Takes standard Weaver type rings and has many slots (16 slots) for scope or accessory placement. Black anodized aluminum fits your guns and matches the finish well. Lifetime Warranty.
| Regular Price: | $ 29.95 / Each | | | Sale Price: | $ 8.95 / Each | | You Save: | $ 21.00 / Each |
| |
| |
Bi-level Rail A1/A2 Carry Handle Z-Mount AR-15 M-16 Multi-Functional Z
Rail Scope Mount designed for fixed carry handle upper receivers, this step-down
mounting platform offers the shooter two levels for mounting optics. This
tactical mount secures to the carry handle with a single thumb nut, while still
allowing the use of the iron sights. The rails are designed to accept all
Picatinny, Weaver scope rings and accessories. Come complete with deluxe
tactical 1inch scope rings and two smaller side rails. Will fit M16A1 A2 Carry
handles, AR-15, Bushmaster, ect, Great for mounting, scope, laser and flash
light. Lifetime Warranty.
(COMES WITH DELUXE TACTICAL 1 INCH WEAVER STYLE
SCOPE RINGS)
Fits any Colt AR15 M4 M16 Standard Carry Handle Also
ArmaLite, Rock River Arms, Olympic Arms, Bushmaster, DPMS, FN Manufacturing,
Knights Armament, Smith and Wesson M&P15I, M&P15 and more.
| Regular Price: | $ 59.95 / Each | | | Sale Price: | $ 23.49 / Each | | You Save: | $ 36.46 / Each |
| |
|
A1/A2 Carry Handle Z-Mount AR-15, M16 A1/A2 SCOPE MOUNT Multi-Functional Z
Rail Scope Mount, Rails are designed to accept all Picatinny/Weaver scope rings
and accessories. Carry handle mount tri mount. One piece body, see thru for iron
sight use, with upper/lower sections, fits on carry handle of M-16 AR-15 ect,
with plenty ring slots to mount a riflescope, flashlight, and laser
simultaneously. One Rail on the upper level, one rail on the lower lever and two
movable rails that can be used on the side of the lower. Lifetime Warranty
Specs:
Carry Handle Mount
Color: Black
Length : 11.22
N.W.(Oz): 8.12
Limited Liftime Warranty
Fits any Colt AR15 M4
M16 Standard Carry Handle Also ArmaLite, Rock River Arms, Olympic Arms,
Bushmaster, DPMS, FN Manufacturing, Knights Armament, Smith and Wesson
M&P15I, M&P15 and more.
| Regular Price: | $ 59.99 / Each | | | Sale Price: | $ 19.95 / Each | | You Save: | $ 40.04 / Each |
| |
| |
AR-15 M16, M4, 3-Points Eye Relief Adjustable Integral Carry Handle Ring Scope Mount Complete with Flat Top Adaptor. Robust and solid carry handle mount complete with 1 integral tactical rings. 3 clever adjustable mounting positions to tightly secure the carry handle and allow for flexible eye relief adjustment. Designed with maximum ring mount support for hard tactical use. Additional flattop adaptor with two thumbscrews and full-length claming plate securely lock mount to flattop base.
Fits any Colt AR15 M4 M16 Standard Carry Handle Also ArmaLite, Rock River Arms, Olympic Arms, Bushmaster, DPMS, FN Manufacturing, Knights Armament, Smith and Wesson M&P15I, M&P15 and more.
| Regular Price: | $ 39.95 / Each | | | Sale Price: | $ 17.95 / Each | | You Save: | $ 22.00 / Each |
| |
|
The Best TriRail Mount System a mounting system that has three rails. Each rail can hold a tactical flashlight, tactical laser or rifle scope, allowing you to dress up your weapon for any situation. The rails have Weaver style cuts so your attached tactical laser, tactical flashlight or rifle scope it can be position to the front or back of the mount.
This rail system will allow you to mount virtually any combination of accessories on any weapon. Easy to install with no gunsmithing and carries a lifetime warranty. The See-Thru Riser Mount attaches to any Weaver base, allows you to see you iron sights and attach any three accessories, clamps directly on flat top rifles or any Weaver style mount.
Liftime Warranty.
Fits ARr-15, M16, M4, Ect Or Just About Any Flat Top,
Style : Flat top Scope Mount Tri Rail Weaver Mount Picatinny
Color: Black
Length : 5.24
Limited Liftime Warranty
| Regular Price: | $ 29.95 / Each | | | Sale Price: | $ 16.95 / Each | | You Save: | $ 13.00 / Each |
| |
| |
Deluxe See-Thru Riser Mount with Picatinny Tri-Rail Mount and STANAG
This
Creative Mounting Base and Locking Plate to Fit on any Picatinny and Weaver Rail
or flatop.
Clever Picatinny Tri-Rails for Tactical Flashlight, Tactical
Laser and Additional Accessory Applications.
Additional STANAG Dimension for
Most Versatile Applications.
Ideal Height, Length and Spacing to Accommodate
Most Versatile Applications
Material: HD T6 Aluminum
Pieces: 1
Rail Type: Picatinny/Weaver
No. Of Rails: 3
Length: 5.7 Inch
Width: 2 Inch
Height: 1.4 Inch
| Regular Price: | $ 59.95 / Each | | | Sale Price: | $ 18.95 / Each | | You Save: | $ 41.00 / Each |
| |
|
Deluxe See-Thru A1/A2 Carry Handle Mount with Picatinny Tri-Rails and
STANAG. Creative Mounting Base with Thumb Nut to Sit and Lock Tight onto Any
Carry Handle M-16 AR-15 ect . Clever Picatinny Tri-Rails for tactical
Flashlight, tactical Laser and Additional Accessory Applications Additional
STANAG Dimension for Most Versatile Applications Ideal Height, Length and
Spacing to Accommodate Most Versatile Applications. Allows for use of the
original iron sights for aiming when installed. Lifetime Warranty.
Fits
any Colt AR15 M4 M16 Standard Carry Handle Also ArmaLite, Rock River Arms,
Olympic Arms, Bushmaster, DPMS, FN Manufacturing, Knights Armament, Smith and
Wesson M&P15I, M&P15 and more.
A1/A2 Carry Handle Mount Scope Mount
Material: HD T6 Aluminum
Pieces:
1
Rail Type: Picatinny/Weaver
Has STANAG Dimension
See-Through
No.
Of Rails: 3
Length: 5.2 Inch
Width: 1.7 Inch
Height: 1.6 Inch
| Regular Price: | $ 59.95 / Each | | | Sale Price: | $ 19.95 / Each | | You Save: | $ 40.00 / Each |
| |
| |
TriRail Mount System a mount system that has three rails. Each rail can
hold a tactical flashlight, tactical laser or rifle scope, allowing you to dress
up your tactical weapon for any situation. The rails have Weaver style cuts so
your attached tactical laser, of tactical flashlight or rifle scope can be
position to the front or back of the mount.
This tactical rail system
will allow you to mount virtually any combination of accessories on any weapon.
Easy to install with no gunsmithing and carries a lifetime warranty. It is a
See-Thru Riser Mount that attaches to any carry handle base and, allows you to
see you iron sights and attach three accessories.
Style : AR 15, M 16,
M4, Carry Handle Mount Tri Rail Stang Riser Scope Mount
Color:
Black
Length : 7.78
Limited Liftime Warranty
Fits any Colt
AR15 M4 M16 Standard A1/A2 style Carry Handle Also ArmaLite, Rock River Arms,
Olympic Arms, Bushmaster, DPMS, FN Manufacturing, Knights Armament, Smith and
Wesson M&P15I, M&P15 and more.
| Regular Price: | $ 59.95 / Each | | | Sale Price: | $ 13.95 / Each | | You Save: | $ 46.00 / Each |
| |
|
Deluxe See-Thru High Profile Riser Mount with Picatinny and STANAG
Dimension
New Gen. Picatinny style riser mount with see-thru design and
STANAG dimension for flat top AR-15 M-16, FALs and other rifles. Precision
machined to exact tolerances from aircraft-grade aluminum alloy. Clever
retention thumb nuts and locking plate for easy and quick installation. Anodized
black matte finish. Has plenty of slots for maximum scope ring adjustments.
Detail Information:
High Profile Riser Mount for Rifles with
Picatinny/Weaver Rail
5.7" Long Picatinny Rail with 13 Slots and STANAG
Feature for Flexible Accessory Application
Clever Retention Thumb Nuts and
Locking Plate for Quick Easy Installation
Precision Made from Aircraft
Aluminum with Matte Black Anodizing
1.0" Saddle Height with See-through
Design
| Regular Price: | $ 29.99 / Each | | | Sale Price: | $ 14.95 / Each | | You Save: | $ 15.04 / Each |
| |
| |
AR-15 M16 A1/A2 Style carry handle mount, scope mount is see thru for iron
site use, 1inch inserts for scope tube.
Fits any Colt AR15 M4 M16
Standard Carry Handle Also ArmaLite, Rock River Arms, Olympic Arms, Bushmaster,
DPMS, FN Manufacturing, Knights Armament, Smith and Wesson M&P15I, M&P15
and more.
Ar-15, M16 , M4, Carry Handle Scope Mount 1" Inserts
Style
:Carry Handle Mount
Color: Black
Lengh (Inch) 3.98
Limited Liftime
Warranty
| Regular Price: | $ 38.99 / Each | | | Sale Price: | $ 14.95 / Each | | You Save: | $ 24.04 / Each |
| |
|
AR-15 M16 A1/A2 Style carry handle mount, scope mount is see thru for iron
site use, 1inch inserts for short scope tube.
Fits any Colt AR15 M4 M16
Standard Carry Handle Also ArmaLite, Rock River Arms, Olympic Arms, Bushmaster,
DPMS, FN Manufacturing, Knights Armament, Smith and Wesson M&P15I, M&P15
and more.
Style : Ar 15, M 16, M4, Carry Handle Mount 1" Inserts Short
Mount
Color: Black
Lengh (Inch) 2.44
Limited Liftime Warranty
| Regular Price: | $ 38.99 / Each | | | Sale Price: | $ 19.95 / Each | | You Save: | $ 19.04 / Each |
| |
| |
AR-15/M-16 A1/A2 Style Carry Handle Mount Rail the finest scope mount
designed for AR-15 AR-10 M-16 M4 rifle carry handle One-piece machined
construction with see-thru design. Takes standard Weaver type rings and has 11
slots for scope or accessory placement. Black anodized aluminum fits your guns
and matches the finish well. Mil-Spec Quality, Solid Machined Construction.
Lifetime Warranty
| Regular Price: | $ 29.99 / Each | | | Sale Price: | $ 9.95 / Each | | You Save: | $ 20.04 / Each |
| |
|
AR15/ M16 Carry Handle Mounted Rail The finest scope mount designed for M16 A1/A2 SCOPE MOUNT M4 rifle carry handle Universal mounting platform, accepts NATO Rail dimensions include all Picatinny/Weaver and STANAG interfaces. Wide angle V shaped iron sight see-thru, unique self-locking thumbnuts, fits snug in carry handle for continuous zero hold. This mount is a dual purpose mount that allows shooter to use both the scope and see through peep for iron sight use great mount at a great price. Lifetime Warranty.
Specs
AR15/M16 Carry Handle Mount
Steel Construction
Matte Black Finish
No Gunsmithing Is Required
Accepts Nato, Stanag And Weaver Style Scopes
Attaches To AR-15 M16 Carrying Handle
Maintains Accuracy Of Iron Sights
Fits any Colt AR15 M4 M16 Standard Carry Handle Also ArmaLite, Rock River Arms, Olympic Arms, Bushmaster, DPMS, FN Manufacturing, Knights Armament, Smith and Wesson M&P15I, M&P15 and more.
| Regular Price: | $ 29.95 / Each | | | Sale Price: | $ 14.95 / Each | | You Save: | $ 15.00 / Each |
| |
| |
H&K Style Low Profile Claw Mount Universal Picatinny Scope Mount fits
MP5, G3, GSG-5 H&K Mount Accepts all varieties of scope, tactical flashlight
and laser. This Low Profile design for covert and discreet shooting
environments. Universal design it is a perfect mount for HK rifle, MP5, G3,
G3A3, etc. Picatinny dimensions allow for most wide range of accessory
applications. Limited lifetime warranty.
MP5, G3, G3A3 H&K Style
Scope Mount
Lengh (Inch) 4.96
Color : Black
Limited Lifetime
Warranty
| Regular Price: | $ 29.95 / Each | | | Sale Price: | $ 12.00 / Each | | You Save: | $ 17.95 / Each |
| |
|
Marlin 60 Picatinny Scope Base 22 Rifle Weaver/Picatinny Tactical Rail
Adaptor Base Mount, Excellent quality and easy to install Convert .22 base to
weaver/picatinny fits the pre-drilled holes on top of your rifles receiver,
tactical low profile for all scope applications 4.65 inches (118mm) long with 11
slots on rail to allow for flexible eye relief adjustments. Complete with screws
for installation on .22 rifle. Great for Ruger 10/22. or Marlin Model 60.
Limited lifetime warranty Leapers.
| Regular Price: | $ 34.95 / Each | | | Sale Price: | $ 6.97 / Each | | You Save: | $ 27.98 / Each |
| |
| |
Marlin 60 Airgun /.22 to Weaver/Picatinny Tactical Rail Adaptor Excellent quality and easy to install Lets you convert airgun or .22 base to Weaver / Picatinny 3.94 inches (100mm) long with 9 slots with grooved rail top to allow for flexible eye relief adjustments. Great for adding the full size scope you wanted. Complete with screws for installation on airgun/.22, including stop pin. Limited lifetime warranty Leapers.
Fits Ruger 10//22, Marlin 60.
.33 Dovetail to Weaver/Picatinny Rail Adaptor
Converts a 3/8" Dovetail rail to a 7/8" Weaver Rail
| Regular Price: | $ 34.95 / Each | | | Sale Price: | $ 6.95 / Each | | You Save: | $ 28.00 / Each |
| |
|
Ruger 10/22 Scope mount fits the pre drilled holes on top of your 10/22 rifles receiver, easy to install and accepts standard Weaver style scope rings.
SCOPE MOUNT
N.W.(OZ): 1.13
LENGH (INCH) 4.76
COLOR: SILVER
Limited Lifetime Warranty :YES
Comes with all mounting hardware made for Ruger 10/22 weaver base scope mount.
| Regular Price: | $ 19.95 / Each | | | Sale Price: | $ 10.95 / Each | | You Save: | $ 9.00 / Each |
| |
| |
Ruger 10/22 Scope mount fits the pre drilled holes on top of your 10/22 rifles receiver, easy to install and accepts standard Weaver style scope rings.
SCOPE MOUNT
N.W.(OZ): 1.13
LENGH (INCH) 4.76
FINISH: Blued
Limited Lifetime Warranty :YES
Comes with all mounting hardware made for Ruger 10/22 weaver base scope mount.
| Regular Price: | $ 19.95 / Each | | | Sale Price: | $ 9.95 / Each | | You Save: | $ 10.00 / Each |
| |
|
This Ruger Style10/22 See-Thru Scope Rail Mount, comes in silver it attaches to your receiver with existing holes and allows you to install a scope, laser or light and still see your iron sights.
N.W.(OZ): 1.42
LENGH (INCH) 4.60
COLOR: BLACK
Limited Lifetime Warranty :YES
Ruger 10/22 See-Thru Rail Mount, Attaches to your receiver with existing holes and allows you to install a scope, tactical laser or tactical light and still see your iron sights.
| Regular Price: | $ 19.95 / Each | | | Sale Price: | $ 14.95 / Each | | You Save: | $ 5.00 / Each |
| |
| |
This Ruger Style10/22 See-Thru Scope Rail Mount, comes in silver it attaches to your receiver with existing holes and allows you to install a scope, laser or light and still see your iron sights.
RUGER 10/22 WEAVER BASE SCOPE MOUNT SILVER SEE THRU
SCOPE MOUNT
N.W.(OZ): 1.42
LENGH (INCH) 4.60
COLOR: SILVER
Limited Lifetime Warranty :YES
Comes with all mounting hardware made for Ruger 10/22 weaver base scope mount see thru for iron site use.
| Regular Price: | $ 29.95 / Each | | | Sale Price: | $ 12.00 / Each | | You Save: | $ 17.95 / Each |
| |
|
Marlin Model 60 .22 rifles scope mount with Weaver/Picatinny style rail. Scope mount comes with all mounting hardware (fits Marlin Model 60 Rifles) with scope mount pre-drilled holes on top of Marlin Model 60 rifle receiver the holes usually have factory installed screw simply remove them and install the scope mount. The weaver style scope mount base has 11 slots on rail to allow for flexible eye relief adjustments for tactical scope applications or red dot sights. Limited lifetime warranty
Marlin Model 60 .22 / Black
Scope Mount
N.W.(Oz): 1.24
Length (Inch) 4.73
Finish: Black
Limited Lifetime Warranty :Yes
Will also fit flat top receivers on : Marlin 9, 45, 39A, 30AS, 30AW, 336(all models), 62, 93, 336, 336C, 375, 444, 1993, 1894 Cowboy, 1895, Glenfield 30, Zane grey, Camp-9 carbine, 922M, 989, .22 auto rifle, Mossberg 640, Western field 740. Most Model XT Rifles.
(Note if you do not have the factory pre-drilled holes on top the receiver you will have to get it drilled and taped.)
| Regular Price: | $ 19.95 / Each | | | Sale Price: | $ 12.95 / Each | | You Save: | $ 7.00 / Each |
| |
| |
Ruger Mini 14 or Mini 30 Mount and Rings Easy Install No Gunsmithing Mini-14 Weaver Style Mount with 1 Rings Easy Installed scope mount it fits on the side plate or your rifle no gunsmithing required and comes complete with Weaver style rings. This will fit all Mini-14 both ranch model and conventional model and Mini-30 models with side-plates. Constructed tough and built to last well made. The 1" Weaver style rings, Allows use of the gun sight. Requires no gunsmithing. Does not mar the gun's surface and detaches quickly. Allows adjustments for elevation. Lifetime Warranty.
The mount includes a side plate with screw hole to replace the original Bolt Locking Cover Plate of the rifle. The mount is attached to the included side plate instead of the original plate.
| Regular Price: | $ 56.95 / Each | | | Sale Price: | $ 25.95 / Each | | You Save: | $ 31.00 / Each |
| |
|
This Mini-14 Early Model Mount Has Blue Finish Mount Attaches To 181 Model
And Newer Guns, Including Ranch Rifles, By Relacing The Sideplate On The Left
Receiver On Mini-14 And Mini-30 Rifles. Lifetime Warranty.
181 Mini-14 / Mini 30 Ranch Rifle Scope Mount Black
Ruger Scope
Mount
Fits Mini-14 / 30
Color : Black
N.W.(Oz): 4.48
Lengh (Inch)
5.43
Limited Lifetime Warranty
This Is A Great Scope Mount For The
Mini-14 /30 Ranch.
| Regular Price: | $ 32.95 / Each | | | Sale Price: | $ 15.00 / Each | | You Save: | $ 17.95 / Each |
| |
| |
This Mini-14 Early Model Mount Has Blue Finish Mount Attaches To 181 Model
And Newer Guns, Including Ranch Rifles, By Relacing The Sideplate On The Left
Receiver On Mini-14 And Mini-30 Rifles. Lifetime Warranty.
Mini-14 Ranch Rifle Scope Mount Black
Ruger Scope Mount
Fits Mini-14 /
30
Color : Silver
N.W.(Oz): 4.48
Lengh (Inch) 5.43
Limited
Lifetime Warranty
This Is A Great Scope Mount For The Mini-14 /30 Ranch.
| Regular Price: | $ 35.99 / Each | | | Sale Price: | $ 23.95 / Each | | You Save: | $ 12.04 / Each |
| |
|
Ruger Mini 14 / 30 Ranch Scope Mount This mount goes over ruger Mini-14 Or
Mini-30 ranch rifle integral scope mount and allowes you to mount any scope you
want with a weaver ring.
This Ruger Ranch Rifle Scope Rail Has A Black
Finish You Can Add This Picantinny Rail in the scope ring slots of your Ruger
Mini-14 Ranch or Mini-30 Ranch Rifle, allows you to attach Weaver rings and a
larger selection of rifle scopes to your ruger rifle and other items like lasers
and tactical Flashlights lights to your weapon on the top and both sides, easy
to install. Fits only existing ruger integrated mounts.
Mini-14 Ranch
Weaver Rifle Scope Mount Black Low Profile
Ruger Scope Mount
Fits
Mini-14 / 30
Color : Black Length (Inch) 7.00
Limited Lifetime
Warranty
| Regular Price: | $ 29.95 / Each | | | Sale Price: | $ 15.00 / Each | | You Save: | $ 14.95 / Each |
| |
| |
Ruger Silver Mini-14 or Mini-30 Ranch Rifle Rail Mount Weaver Weaver Style Accessory Rail. This mount goes over ruger Mini-14 Or Mini-30 ranch rifle integral scope mount and allowes you to mount any scope you want with a weaver ring.
This Ruger Ranch Rifle Scope Rail Has A Silver Finish You Can Add This Picantinny Rail in the scope ring slots of your Ruger Mini-14 Ranch or Mini-30 Ranch Rifle, allows you to attach Weaver rings and a larger selection of rifle scopes to your ruger rifle and other items like lasers and tactical Flashlights lights to your weapon on the top and both sides, easy to install
Mini-14 Ranch Weaver Rifle Scope Mount Black Low Profile
Ruger Scope Mount
Fits Mini-14 / 30
Color : Silver
Length (Inch) 7.00
Limited Lifetime Warranty
| Regular Price: | $ 35.99 / Each | | | Sale Price: | $ 17.00 / Each | | You Save: | $ 18.99 / Each |
| |
|
Mosin Nagant Scout Rifle Scope Mount
Fits Mosin Nagant Rifles
Color :
Black
N.W.(Oz): 2.61
Lengh (Inch) 6.61
Limited Lifetime Warranty
Mounts Quick And Easily To The Rear Sight Leaf Of Most Russian,
Hungarian, Chinese, Polish, And Finnish Models Including: 38, 44, M28, 53, M27,
M28 Models 91, 91/30, 91/38, 91/59.
Punch Out Rear Sight Leaf Cross Pin, Remove Rear Sight Leaf And Spring, Place
Scope Mount Between Rear Sight And Tighten The Two Side Screws Evenly, Loosen
One Top Screw And Tighten The Other To Adjust Elevation Until It Levels With Gun
Barrel And Your Done Great Mount For The Price.
This Mount Requires One Of Our Long Eye Relief Scopes Check Are Pistol Scope
Catagory, We Recommend Item Numbers SEPB2732BNCS Or MOSINKITNCS
| Regular Price: | $ 28.95 / Each | | | Sale Price: | $ 10.95 / Each | | You Save: | $ 18.00 / Each |
| |
| |
This Sks Rifle Gas Tube Sniper Scope Mount Replaces Your Old Sks Gas Tube
Make A Instant Scout Sniper Rifle With No Drilling Or Tapping. Gain An Accessory
Rail For Lights, Lasers Or Scout Scopes, Easy To Install, Great For Deer Hunting
. Fits Yugoslavia Sks M59 66A1 , Russian Sks M45 , Chinese Sks 56, Romanian Sks
, Albanian Sks. Ect. Limited Lifetime Warranty. Sks Gas Tube Scope Mount Weaver
Base.
Replaces SKS gas tube
Fits most SKS rifles
Length (Inch) 9.65
Color : Black
Limited Lifetime
Warranty
| Regular Price: | $ 39.99 / Each | | | Sale Price: | $ 19.95 / Each | | You Save: | $ 20.04 / Each |
| |
|
MNT-640TRIII / MNT-T640TR SKS Picatinny Tri Rail Mount, SKS Rifle Tri Rail
Tactical Receiver Cover the ultimate mounting system for your SKS rifle has a
main optics rail on top and an accessory rail on each side to mount lasers,
lights, or any other rail mounted accessory. This this mount offers more than
enough space to outfit your SKS rifle add all your accessories. Each rail is
precision machined to accept all Picatinny/Weaver accessories. The see thru
design allows the use of the iron sights. This mount has four locking screws
ensure that your optics remain steady for accurate shooting. This Scope Mount is
the most wanted by SKS rifle buyer this SKS Rifle Tri Rail Tactical Receiver
Cover is great. Limited lifetime warranty . MNT-T640TR
New Update
MNT-640TRIII To MNT-T640TR
| Regular Price: | $ 26.00 / Each | | | Sale Price: | $ 23.95 / Each | | You Save: | $ 2.05 / Each |
| |
| |
This M-1 Carbine Scope Mount is Easy too install without altering your M-1 carbine it has a Weaver style base it allows you to mount a scope, tactical light or laser, length 3.5". (Installs in rear sight dovetail ) so you must remove the existing rear sight by moving it out to the right side of the weapon if you are not skilled it might require a gunsmith. LIMITED LIFETIME WARRANTY. This M-1 scope mount is great it lets you mount a scope quick and easy.
| Regular Price: | $ 29.99 / Each | | | Sale Price: | $ 12.00 / Each | | You Save: | $ 17.99 / Each |
| |
|
Deluxe M1 Carbine Scope Mount With 1 Rings
This brand new Scope Mount, complete with Weaverฎ-style rings, Deluxe, durable M1 Carbine Scope Mount fits all models. Precision machined. Easy to install. No gunsmithing required. Complete with our high quality 1" Weaverฎ-style rings Tactical Rings. Mounts by replacing the rear gun sight.
| Regular Price: | $ 39.95 / Each | | | Sale Price: | $ 17.00 / Each | | You Save: | $ 22.95 / Each |
| |
| |
Military Rifle Mount For M14/M1A Rifles This Tactical Sniper Scope Mount Is
New Gen Mil-spec Quality Deluxe Sniper Mount for M14/M1A Rifles Picatinny
Complied 15-slotted Top Rail with the Rear End Locks into the Charger Guide
Dovetail. One Piece Machined from Heavy Duty Aircraft-grade Aluminum Alloy with
Black Matte Finish. Side Plate Features Locking Point, Horizontal Bottom Guide
and Adjustable Side Screw to Provide A Rock Solid Foundation. Accepts Accepts
Picatinny & Weaver-Style Rings & Allows Use of Iron Sight . Installs
Easily, No Gun-smithing Required. Limited lifetime warranty.
M14/M1A Sniper Rifle Scope Mount
Material: Heavy Duty Aircraft-grade
Aluminum
Rail Type: Picatinny/Weaver
4-Point Locking Points
Allows
Use of Iron Sight
Accepts Picatinny & Weaver-Style Rings
No
Gun-smithing Required
Limited lifetime warranty.
| Regular Price: | $ 49.95 / Each | | | Sale Price: | $ 28.95 / Each | | You Save: | $ 21.00 / Each |
| |
|
New Gen. Weaver Style AK/MAK-90 Mount with 1 Tactical Rings
Stabilizer design of receiver cover to ensure locking and prevent rocking. Longer Weaver ( See-Thru Rail )for additional mounting positions. Optimum height and width clearance for all popular scopes.
| Regular Price: | $ 69.95 / Each | | | Sale Price: | $ 23.49 / Each | | You Save: | $ 46.46 / Each |
| |
| |
5th Gen AK Tactical Receiver Cover Tri-Rail Mount with rings replaces
original top receiver cover on rifle it will fit any AK-47 / MAK-90 type rifle
with a (standard) Military top receiver cover. One-piece Integral Picatinny
Tri-Rails Attached to Receiver Cover. Accepts All Varieties of Scope, Tactical
Flashlight, and Tactical Laser. Additional STANAG Dimension for Most Versatile
Applications. Most Exciting AK Mount Ever Made - Ideal Height, Length and
Spacing to Accommodate Most Versatile Applications Mil-Spec Rail.
Liftime
Warranty.
Note Will Fit Bulgarian Arsenal Milled Receiver.
(Will Not Fit Yugo M70)
| Regular Price: | $ 59.99 / Each | | | Sale Price: | $ 36.00 / Each | | You Save: | $ 23.99 / Each |
| |
|
AK-47 / MAK-90 Receiver cover Tril-rail mount, Replaces original top receiver cover on rifle it will fit any AK-47 / MAK-90 type rifle with a (standard) Military top receiver cover Tri Rails Weaver Style / Picattiny Rails
Made of Steel and Aluminum Perfect for Scope, Laser, Flashlight, Red Dot Combos.
Allows for multi-position mounting, compete replacement cover for your AK47, MAK 90 type rifle, easy to install, allows you to see your iron sights.
Liftime Warranty.
AK 47 MAK 90 TOP COVER TRI-RAIL SCOPE MOUNT ACCESSORY RAIL
AK 47 MAK 90 RIFLE SCOPE MOUNT SPECS:
N.W.(OZ): 9.80
LENGH (INCH) 9.85
FINISH: BLACK
Limited Lifetime Warranty :YES
| Regular Price: | $ 49.99 / Each | | | Sale Price: | $ 17.00 / Each | | You Save: | $ 32.99 / Each |
| |
| |
MNT-973 UTG Mil-Spec AK-47 Side Mount with Double Rails 3rd Generation Mount,
Rock solid AK Double Rail Side Mount - precision machined to fit most AKs and AK
variants. Machined from aircraft grade aluminum for extreme strength. Double
Picatinny rails for scope & versatile accessory applications. STANAG
dimension and 12 slots on top rail. 8 slots on side rail. Optimal clearance to
fit all tactical scopes right on top of bore centerline. Still allows the use of
original iron sights. (Will fit the Saiga 308)
Fits Most AK variants
AK-47
WASR10/63)
Saiga .308
Saiga
7.62x39
Saiga .223
Romanian AK
| Regular Price: | $ 59.95 / Each | | | Sale Price: | $ 26.95 / Each | | You Save: | $ 33.00 / Each |
| |
|
Universal Pistol Mount Fits Most Glocks / Berettas Attaches on the accessory rail on the bottom of Glock, Beretta pistols or any gun with a bottom rail. Weaver style tactical rail extends above handgun to mount a scope or laser sight or tactical flashlight. Limited Lifetime Warranty.
N.W.(OZ): 3.50
LENGH (INCH) 5.00
FINISH: BLACK
| Regular Price: | $ 29.99 / Each | | | Sale Price: | $ 13.95 / Each | | You Save: | $ 16.04 / Each |
| |
| |
Ncstar Laser Sight And Flashlight Combo This Quick Detachable Laser System
And Tactical Flashlight Attaches Quickly And Securely To Glock, Beretta,
Springfield Armory And Smith & Wesson Sw99 Pistols With 7/8" Wide Weaver /
Picatinny Rails System & Scope Mounts.
The Laser Mount Utilizes A Lock To Securely Attach The Tactical Flashlight To
The Laser System Mounting Rails. When The Lock Is Depressed It Is Released For
Quick Removal. To Install, Depress Buttons, Slide The Mount On The Mounting
Rails. Made From Precision Machined From Aircraft Grade Aluminum.
This Tactical Luxeon-Led Flashlight & Laser System With Quick Release Can
Be Mounted To Any Pistol Shotgun Or Rifle With Weaver Rail Or Tactical Raill
Picatinny Rail It Is Great For Police Work Swat, Tactical Light Mount &
Laser Included. Comes With A Limited Lifetime Warranty
Universal Rail-Mount
Laser Tactical Flashlight System
Laser Specifications
Weight.................................2 Ounces With
Batteries
Length.................................Less Than 2-1/4
Inches
Power Output...................5Mw Continous
Module
(Standard).............650Nm Module
Module (Super Bright).......635Nm
Module
Range (Standard)................Up To 500 Yards At Night
Range
(Super Bright)..........Up To 1000 Yards At
Night
Batteries...........................(3) Ag-13 Button Cell Type
Included
Battery Life......................Over 1.6 Hours Continuous
Beam
Size............................Approx. 3.5 Inches At 100
Yds.
Adjustment.......................10 Feet Adjustment Movement For Windage
And Elevation @ 100 Yards
Color: Black
Material:Metal
Luxeon Led Tactical Flashlight Specifications
Comes With Two 3 Volt Lithium Batteries With A Storage Life Of Up To 10
Years. Made From Machined Aluminum. O-Ring Sealed For Moisture Protection.
Anti-Roll Head 1 Watt Super Bright High-Flux Luxeon Led 1 .75 Hours. Average Run
Time At Maximum Intensity, 2.5 Additional Hours. Of Declining Usable Output
4.50 Long X 1. Diameter
We Sell a remote tactical Laser Switch Item
# ALWSNCS for this laser it replaces the rear swith.
We Sell a remote
tactical Flashlight Switch Item # AFWSNCS for this tactical flashlight it
replaces the rear tailcap.
The remote is perfect for remote on and off
control of your tactical laser or flashlight it can be mounted on your gun, a
highly recommended accessory you will love it.
( We suggest Extra
Laser Batteries Item # AG13 )
( We suggest Extra CR123A 3Volt Lithium Batteries Item # 123A
Batteries )
| Regular Price: | $ 79.99 / Each | | | Sale Price: | $ 56.00 / Each | | You Save: | $ 23.99 / Each |
| |
|
NcStar Pistol & Rifle LED Flashlight Weaver
Mount. Tactical Flashlight with Weaver Base. This Weaver Base Flashlight
fits pistol accessory rails, Picatinny rails or Weaver bases. Color Black,
Material Machined aircraft aluminum Includes CR123 lithium Battery
This
is one of brightest, most versatile compact combat tactical flashlights on the
market. It Has a Blinding White Super High-Flux Luxeon LED that is 10 times
brighter than a high-intensity LED giving you the longevity of an LED with the
brightness of a high-powered conventional bulb. This Tactical Flashlight Kit
with mount Can Be mounted to any Pistol shotgun or rifle with weaver rail or
tactical raill great for police work swat, tactical light mount Included.
Tactical Flashlight Is made of Machined aircraft aluminum O-ring sealed
with anodized swat black finish. Comes with on off finger switch. Comes with a
Limited Lifetime Warranty.
( We suggest Extra CR123A 3Volt Lithium
Batteries Item # 123A Batteries ) Works great with Hi-Point 995, 995TS Carbine,
Hi-Point 4095TS Carbine
| Regular Price: | $ 49.95 / Each | | | Sale Price: | $ 27.49 / Each | | You Save: | $ 22.46 / Each |
| |
| |
Tactical Flashlight pressure switch it allows you to mount your tactical
light to any shotgun or rifle with a remote presssure switch on and off control
great for police work swat, light and mount not included. Comes with a Limited
Lifetime Warranty
Tactical Flashlight Wired Pressure Switch Works With
Following Tactical Laser Models We Sell TTFLBNCS, APFLSNCS, TTFLB BR
Color: Black
Material:Coiled Wire
N.W.(Oz): 0.30
Lengh (Inch)
6.0" To 20"
| Regular Price: | $ 9.99 / Each | | | Sale Price: | $ 3.99 / Each | | You Save: | $ 6.00 / Each |
| |
|
| This Red Laser Designator Universal Tactical Laser sight with mount can be mounted to any pistol shotgun or rifle with Attach to 7/8" wide Weaver / Picatinny Rails System & Scope Mounts. Handgun rails and mounting base, It is great for police work swat fits all GLOCK with rail S&W, SPRINGFIELD ARMORY, TAURUS: PT 92 AR, PT 24/7, WALTHER P22, BERETTA 92, HECKLER AND KOCH P200 SERIES, ect, it can be ajusted for sighting in windage and elevation @ 100 yards, tactical laser and mount Included great price on sale. Comes with a Limited Lifetime Warranty.
UNIVERSAL RAIL-MOUNT LASER SYSTEM SPECIFICATIONS
WEIGHT.................................2 ounces with batteries
LENGTH.................................less than 2-1/4 inches
POWER OUTPUT...................5mw continous
MODULE (Standard).............650nm module
MODULE (Super Bright).......635nm module
RANGE (Standard)................Up to 500 yards at night
RANGE (Super Bright)..........Up to 1000 yards at night
BATTERIES...........................(3) AG-13 Button Cell type Included
BATTERY LIFE......................Over 1.6 Hours continuous
BEAM SIZE............................Approx. 3.5 inches at 100 yds.
ADJUSTMENT.......................10 Feet adjustment movement for windage and elevation @ 100 yards
Color: BLACK
Material:METAL
Comes with a Limited Lifetime Warranty.
We Sell a remote tactical Laser Switch Item # ALWSNCS for this laser it replaces the rear swith.
This is perfect for remote on and off control of your tactical laser it can be mounted your gun, a highly recommended laser accessory you will love it Item # ALWSNCS
ALSO AVAILABLE IN SILVER ITEM # APRLSNCS
( We suggest Extra Laser Batteries Item # AG13 )
Will fit On Hi-Point 995TS Carbine, Hi-Point 4095TS Carbine.
| Regular Price: | $ 79.95 / Each | | | Sale Price: | $ 19.00 / Each | | You Save: | $ 60.95 / Each |
| |
| |
Tactical Flashlight 3 watt Luxeon Super Hi-Flux LED For Shotgun & Rifles
With Tactical Mount up to 3.85 hours run time.
This is one of brightest,
most versatile compact combat tactical flashlights on the market. It Has a
Blinding White Super High-Flux Luxeon LED set deep in the reflector for a
penetrating beam that is 12 times brighter than a high-intensity LED giving you
the longevity of an LED with the brightness of a high-powered conventional bulb.
Dimensions are 4.64 inches long, 1 inch wide, 1.12 inches high.
Comes
with tactical Flashlight weaver style ring mount for rifle, shotgun, and pistol
mounting. Powered by 2, 3-volt (lithium batteries included), Tactical Flashlight
Is Machined aircraft aluminum with anodized finish. Momentary pushbutton or
rotate for locked "on" O-ring sealed,includes pocket clip. Comes in swat black
Limited One Year Warranty.
Remote presure switch is not included but
available item # AFWSNCS. Comes with a Limited One Year Warranty.
Water Resistant
Recoil Resistant
( We suggest Extra CR123A 3Volt Lithium Batteries Item # 123A
Batteries )
| Regular Price: | $ 84.95 / Each | | | Sale Price: | $ 29.95 / Each | | You Save: | $ 55.00 / Each |
| |
|
This SKS Scope mount is Hi-profile with Integral 1" Rings and See-thru
.
This New generation SKS Scope mount is rock solid with integral ring
mount. Designed with optimal clearance to fit all Chinese or Russian SKS Rifles,
Fits all 1 mini and full size scopes right onto the top of the bore centerline.
Just replace your factory rear reciever cover install scope and you are ready to
sight in. All edges are machined with proper contours for maximum strength and
stability. May require minor filing on front of mount for a snug fit, complete
with instructions on how to adjust for a perfect, solid fit.
Allows for use of the original iron sights for aiming when installed, design
may be low profile with special cutting, high profile with tunnel or clearance
so as not to block the user's vision from the rear aperture to front post.
Lifetime Warranty. MNT-640T5
Material: Steel
Pieces: 2
Length: 4.9 Inch
Width: 1.8 Inch
Height: 3 Inch
| Regular Price: | $ 39.95 / Each | | | Sale Price: | $ 19.95 / Each | | You Save: | $ 20.00 / Each |
| |
| |
H&K Claw Mount STANAG to Picatinny / Weaver Rail Adaptor Complete w/ Screws
True Picatinny / Weaver rail. Sits on top of the STANAG H&K Claw Mount. Most useful mount to covert from STANAG rail dimension to Picatinny / Weaver rail. Complete with screws to attach the STANAG mount. G3, MP5 and CETME rifles. Specially designed to accept STANAG rings/scope applications.
To be used with Our H&K Claw Mount Item # MNT-HK01LP Limited lifetime warranty
| Regular Price: | $ 14.95 / Each | | | Sale Price: | $ 7.95 / Each | | You Save: | $ 7.00 / Each |
| |
|
H&K Claw Mount with Double Picatinny Rails and STANAG Dimension This Creative one-piece integral Mount with Picatinny double rails. Accepts all varieties of scope, tactical flashlight and laser. Perfect mount for any HK rifle, MP5, G3, G3A3, GSG-5 etc. Additional STANAG dimension for most versatile applications. Great new gen look at the most affordable price. Limited lifetime warranty
This Claw Mount With Double Picatinny Rails Will Fit All Of The Following Weapons
HK21
HK91
HK G3
HK33
HK53
HK93
HK94
MP5
MP5K
PTR91 / JLD
CETME (Cast Or Stamped Receivers)
Vector V53/V51
SW5
BW5
CA5
Fits Most Clone Or Custom Built Hk Style Rifle.
| Regular Price: | $ 49.95 / Each | | | Sale Price: | $ 24.95 / Each | | You Save: | $ 25.00 / Each |
| |
| |
New Scope mount For Heckler & Koch G3, MP5,91 and PTR 91 Low Profile Universal Bi-Direction Picatinny Scope Mount Works great with your H&K and most clones. Accepts all varieties of scope, tactical flashlight and laser.
This Low Profile design for covert and discreet shooting environments. Universal Bi-Direction design it is a perfect mount H&K rifle, MP5, G3, G3A3, etc. Picatinny dimensions allow for most wide range of accessory applications. Limited lifetime warranty.
G-3/Mp-5/91 Scope Mount
Low Pro Bi-Direction Claw Mount
Aircraft-Grade Aluminum Alloy
Locking Clamp Spring Retention
Quick & Easy Attachment
13 Picatinny Slots
Limited Lifetime Warranty
| Regular Price: | $ 39.95 / Each | | | Sale Price: | $ 19.95 / Each | | You Save: | $ 20.00 / Each |
| |
|
MNT-983 Deluxe FAL Scope Mount with Integral Sliding Rail and STANAG Rail This Deluxe FAL Scope Mount Fits both inch and metric receivers. Made of aircraft grade aluminum alloy with superior quality. One-piece integral sliding rails. One-piece integral STANAG mounting deck to accommodate any STANAG scope or rings. Also can be used with Picatinny adaptor for all other scope applications. Maintains the use of your iron-sights. Installs in seconds. Limited lifetime warranty. Comes with a Limited Lifetime Warranty.
Specs
Large Ejection Port For Optimum Performance
Material: Aircraft-grade Aluminum Alloy
See-through Feature Allowing Use of Iron Sights
Integral STANAG Mounting Deck
Inch and Metric Compatible (Fits Most Fals)
Limited Lifetime Warranty
Length: 8.6 inch
Width: 1.7 inch
Height: 2.4 inch
| Regular Price: | $ 95.00 / Each | | | Sale Price: | $ 63.00 / Each | | You Save: | $ 32.00 / Each |
| |
| |
This picatinny Gunsmith Rail Blank is contoured to fit the standard actions
perfect for the gun smith who wants to build his optical or tactical mounts it
does not have pre drilled intervalsso you can custom fit to your rifles,
Shotguns and hand guns .Made from T6 Aricraft Grade Aluminum. 12" X 0.31"
Note rail end do have finished mounting hole recesses for full size mounting
option.
| Regular Price: | $ 51.95 / Each | | | Sale Price: | $ 12.49 / Each | | You Save: | $ 39.46 / Each |
| |
|
This picatinny Gunsmith Rail Blank is contoured to fit the standard actions
perfect for the gun smith who wants to build his optical or tactical mounts it
does not have pre drilled intervalsso you can custom fit to your rifles,
Shotguns and hand guns . Made from T6 Aricraft Grade Aluminum. 12" X 0.40"
Note rail end do have finished mounting hole recesses for full size mounting
option.
| Regular Price: | $ 52.95 / Each | | | Sale Price: | $ 13.49 / Each | | You Save: | $ 39.46 / Each |
| |
| |
This picatinny Gunsmith Rail Blank is contoured to fit the standard actions
perfect for the gun smith who wants to build his optical or tactical mounts it
does not have pre drilled intervalsso you can custom fit to your rifles,
Shotguns and hand guns . Made from T6 Aricraft Grade Aluminum. 12" X 0.64"
Note rail end do have finished mounting hole recesses for full size mounting
option.
| Regular Price: | $ 29.99 / Each | | | Sale Price: | $ 14.49 / Each | | You Save: | $ 15.50 / Each |
| |
|
MNT-978 UTG Leapers Mil-Spec AK-47 5th Gen. Quick Detachable Double Rail Side
Mount New gen. AK double rail side mount designed with Quick Detachable/Lock
Lever. Precision machined from aircraft grade aluminum for extreme strength.
Fully adjustable for most AK side rails. Double Picatinny rails for scope &
versatile accessory applications. STANAG dimension and 12 slots on top rail. 8
slots on side rail. Optimal clearance to fit all tactical scopes right on top of
bore centerline. Designed for combat use with great zero retention feature.
Still allows the use of original iron sights. Limited lifetime warranty (Will
fit the Saiga 308)
The AK side mount is designed to be installed on the
standard side dovetail rail. The dimensions of the dovetail rail vary between
different AK variants. The manufacturer has conducted many tests and concluded
the optimal dimensions for the mount to fit as many AK variants as possible. If
it cant fit on your rifle, its possible that the variation is too large. Under
this situation, we recommend you file the mount or the dovetail rail a little
bit and apply some lubrication liquid to push it on. Or you may replace the
original dovetail rail on the rifle with Ak Side Plate Item # TL-M47SR.
UTG 5th Gen Quick Detachable Double Rail AK Side
Mount
Fits Most AK variants
AK-47
WASR10/63)
Saiga .308
Saiga
7.62x39
Saiga .223
Romanian AK
| Regular Price: | $ 69.95 / Each | | | Sale Price: | $ 35.95 / Each | | You Save: | $ 34.00 / Each |
| |
| |
AR-15 M-16 Multi-Functional Z Rail Scope Mount designed for fixed carry handle upper receivers, this step-down mounting platform offers the shooter two levels for mounting optics. This tactical mount secures to the carry handle with a single thumb nut, while still allowing the use of the iron sights. The rails are designed to accept all Picatinny, Weaver scope rings and accessories. Come complete with deluxe tactical 1inch scope rings and two smaller side rails. Will fit M16, AR-15, XM-15 Bushmaster, ect, Great for mounting, scope, laser and flash light. Lifetime Warranty (COMES WITH DELUXE TACTICAL 1 INCH WEAVER STYLE SCOPE RINGS)
| Regular Price: | $ 59.95 / Each | | | Sale Price: | $ 23.49 / Each | | You Save: | $ 36.46 / Each |
| |
|
Fits RWS Diana Air Rifle Sidelevers 48, 52 & 54 and 460 Magnum Underlever Diana Rifle Attaches to rifle's 11mm scope Rail, Tapered Design for Upward Compensation Recoil Stop Shoulder and Stop Pin to Prevent Bi-directional Recoil. Decreases barrel droop with 17.1 upward compensation and stops scope shift. Three High Strength Screws to Ensure Solid Locking Converts RWS Airgun Rail to Picatinny/Weaver Rail for Most Versatile Accessory Applications 12 Picatinny Slots on Top Rail to Provide Flexible Eye Relief Adjustment Reversible Side Plate to Fit 9mm 11mm Airgun Dovetail with Tight Tolerance Milled Base to Accept Filler Screw on Rifle.
(Fits Side- & Under-Levers Diana Air Rifle)
| Regular Price: | $ 29.95 / Each | | | Sale Price: | $ 16.95 / Each | | You Save: | $ 13.00 / Each |
| |
| |
Fits RWS Diana Air Rifle 34, 36, 38, 45 & 350 Magnum, Compensates for Droop & Stops Scope Shift Attaches to rifle's 11mm scope Rail, Tapered Design for Upward Compensation Recoil Stop Shoulder and Stop Pin to Prevent Bi-directional Recoil. Decreases barrel droop with 20.7 upward compensation and stops scope shift. Three High Strength Screws to Ensure Solid Locking Converts RWS Airgun Rail to Picatinny/Weaver Rail for Most Versatile Accessory Applications 12 Picatinny Slots on Top Rail to Provide Flexible Eye Relief Adjustment Reversible Side Plate to Fit 9mm 11mm Airgun Dovetail with Tight Tolerance Milled Base to Accept Filler Screw on Rifle.
Mount Fits Diana Breakbarrels
| Regular Price: | $ 29.95 / Each | | | Sale Price: | $ 16.95 / Each | | You Save: | $ 13.00 / Each |
| |
|
Airgun /.22 to Weaver/Picatinny Tactical Rail Adaptor Excellent quality and easy to install Lets you convert airgun or .22 base to Weaver / Picatinny 3.94 inches (100mm) long with 9 slots with grooved rail top to allow for flexible eye relief adjustments.Great fo full size scope you wanted. Complete with screws for installation on airgun/.22, including stop pin. Limited lifetime warranty Leapers.
| Regular Price: | $ 19.95 / Each | | | Sale Price: | $ 6.95 / Each | | You Save: | $ 13.00 / Each |
| |
| |
The finest scope mount designed for AR-15 AR-10 M-16 M4 rifles A1/A2
Style carry handle One-piece machined construction with see-thru design.
Takes standard Weaver type rings and has 11 slots for scope or accessory
placement. Black anodized aluminum fits your guns and matches the finish well.
Mil-Spec Quality, Solid Machined Construction. Lifetime Warranty
| Regular Price: | $ 29.99 / Each | | | Sale Price: | $ 9.95 / Each | | You Save: | $ 20.04 / Each |
| |
|
AR15/M16 A1/A2 Style Carry Handle Mount CAA, Command Arms AR15 M16
carrying handle scope mount for your AR15/ M16 fits inside the carry handle
groove allowing the option of iron sights with an Scope Or Reflex Sight. Secured
with a thumb screw.
Specs
AR15/M16 Carry Handle Mount
Aluminum Construction
Matte Black Finish
No gunsmithing is required
Accepts Nato, Stanag And Weaver Style Scopes
Attaches To AR-15 M16
Carrying Handle
Maintains Accuracy Of Iron Sights
| Regular Price: | $ 15.95 / Each | | | Sale Price: | $ 9.95 / Each | | You Save: | $ 6.00 / Each |
| |
| |
AR-15/16, M16 A1/A2 Style Carry Handle Mount this Scope mount is see thru for
iron site use, 1 inch Integral Rings for scope tube. AR-15, M16 , M4, CARRY
HANDLE SCOPE MOUNT 1" INSERTS
Style : A1/A2 Style Carry Handle Mount
Color: Black
N.W.(Oz): 5.26
Length (Inch) 3.98
Limited Liftime Warranty
| Regular Price: | $ 38.99 / Each | | | Sale Price: | $ 14.95 / Each | | You Save: | $ 24.04 / Each |
| |
|
Fits Remington 798 Rock Solid Steel Integral Scope Base for Remington 798
Rifles it is Heavy Duty solid steel construction with Weaver Base and 7
Picatinny Slots on Top Mid Section is Half Cut for Shell Ejection locking Screws
Included this is a great scope mount for the Remington 798 rifle. The new
Remington 798 Rifles come drilled and tapped for scope mounts it is a easy
installation. MNT-RM798
Scope Mount Specs:
Material: Steel
Rail Type: Picatinny/Weaver
Length: 6.0 inch
Locking Screws
Included
Matte Black Finish
| Regular Price: | $ 39.95 / Each | | | Sale Price: | $ 18.49 / Each | | You Save: | $ 21.46 / Each |
| |
| |
Remington 700 Short Action Tactical Scope Mount Precision machined from
solid steel with half cut in mid section for quick easy shell ejection. Fits
Remington Model 700 Short Action Rifle. Locking Screws Included. Rail is
Picatinny/Weaver style base. Limited lifetime warranty.
Scope Mount
Specs:
Material: Steel
Rail Type: Picatinny/Weaver
Length: 5.5
inch
Locking Screws Included Matte Black Finish
| Regular Price: | $ 49.95 / Each | | | Sale Price: | $ 29.95 / Each | | You Save: | $ 20.00 / Each |
| |
|
This tactical rugged scope base is one-piece and provides rock-solid mounting for your Remington 700 long action rifles. This tactical scope mount is precision CNC machined from steel billet for extreme strength and recoil resistance With half cut in mid section for quick easy shell ejection. (fits remington model 700 long action rifles). Locking screws included. Rail is picatinny/weaver style base. Limited lifetime warranty.
Scope Mount Specs:
Material: Steel
Rail Type: Picatinny/Weaver
Length: 6.3 inch
Locking Screws Included
Matte Black Finish
| Regular Price: | $ 69.95 / Each | | | Sale Price: | $ 18.95 / Each | | You Save: | $ 51.00 / Each |
| |
| |
Quick Release Weaver Style Riser Mount / Flat Top Riser Mount Great For AR15,
M4, M16 Ect. Limited Lifetime Warranty
Features: MARFQ
Hard Anodized
Black Aluminum
Steel Locking Quick Release Lever
Mounts to virtually all
Weaver and Picatinny Rails
Raise your mounting surface by 0.75
inches
Specifications:
Length:5.3 inches
Height: 0.9 inches
Width:
1.9 Inches
Limited Lifetime Warranty
OUT OF
STOCK
| Regular Price: | $ 59.95 / Each | | | Sale Price: | $ 19.99 / Each | | You Save: | $ 39.96 / Each |
| |
|
G-3/MP-5 SCOPE MOUNT H&K Style Claw Mount for G-3 MP-5 GSG-5 Scope Mount Designed to fit the HK-91-93-94, MP5 CETME rifles, and SP89. STANAG Steel Claw Mount Complete with STEEL PICATINNY RAIL Superbly designed and precision machined STEEL claw mount for use with G3, MP5 and CETME rifles. Specially designed to accept STANAG rings/scope applications.
Note Some rifles may be a little wider on the receiver, mount can be filed at claw to fit or dremeled. Limited lifetime warranty
G-3/MP-5 SCOPE MOUNT
| Regular Price: | $ 129.95 / Each | | | Sale Price: | $ 59.99 / Each | | You Save: | $ 69.96 / Each |
| |
| |
Mount your 1 inch flashlight or laser to any 1 inch scope tube or 12 gauge
shotgun magazine tube. 2 Built in Weaver style rail tabs also allow you to mount
extra accessories to your weapon to create a fully customizable set up. Great
for Mossberg 500, Remington 870 with mag tub, Winchester 1300 1200, SPAS-12,
Benelli M3 (Super 90) ect.
OUT OF
STOCK
| Regular Price: | $ 19.95 / Each | | | Sale Price: | $ 8.95 / Each | | You Save: | $ 11.00 / Each |
| |
|
This mount fits Fits Colt .45 1911 Gov't Frames & Clones Scope mount is easy to install with no gunsmithing, this semi-auto pistol mount integrates with the pistol's original components, This .45 1911 govt frame pistol scope mount is a see-thru design and provide minimal slide clearance for a cleaner look. This Scope mount provide full length ring rails for maximum eye relief adjustment with 10 Slots. This .45 1911 Govt. Mount Uses slide stop pin to attach. Mount is See thru allows use of gun's sights. Elevation can be adjustted to zero scope or laser. Mount has a standard dovetail base for weaver type rings.
Specs:
Scope Mount
Fits Colt .45 (1911 Govt. Frames & Clones)
Saddle Mount
Uses Slide Stop Pin To Attach
Accepts Weaver Style Rings
Has Elevation Adjustment To Zero Scope
Rail Has 10 Slots
See Thru Design
Mount Is Aircraft Grade Aluminum
Color Flat Black
Currently Out Of Stock From Manufacturer This Will Be A Back Ordered Item.
| Regular Price: | $ 79.95 / Each | | | Sale Price: | $ 78.00 / Each | | You Save: | $ 1.95 / Each |
| |
| |
Mauser Karabiner Kar 98k Rifle Scout Scope Mount Fits on front Iron sight
leaf foward of the bolt so you do not have to change the bolt handle. This
Mauser Sniper Scout mount is a great to turn your old Mauser rifle into a long
range sniper hunting rifle great for hunting. FITS German K98 Mauser, VZ. 24
rifle Yugo 48/48A Turned Bolt, Yugo 24/47 Straight Bolt, Turkish
1903/1937/1938/1946 & Swiss Models. Limited Lifetime Warranty.
This
98K Mauser Scout Military Sniper Scope Mount is very easy to install First you
punch out rear sight leaf pin and then remove rear sight leaf & spring then
Put scope mount between sight ears and tighten the side screws evenly turn for
turn each side. Then Loosen one top screw and tighten the other to adjust the
mount elevation until it levels with your rifle barrel that's it your done.
Mount Has Locking Bolt Configuration and level
adjustments.
| Regular Price: | $ 69.95 / Each | | | Sale Price: | $ 49.95 / Each | | You Save: | $ 20.00 / Each |
| |
|
AK Mount With Tri-Rail This AK Tactical Scope mount with tri-rail system Is
mounted directly over the receiver it is a very rugged design provides a rock
solid mounting system for scopes with a rugged look for your AK-47. The rail is
Picatinny / Weaver style it can be used as a strait flat top scope mount or with
included tri-rail for mounting laser sights or tactical flashlights. Come in a
matte black finish.
This AK Tactical Scope Mount System is a fast (easy
Installation) you remove the rear sight blade of your AK, then remove rear
trunnion screw, install the front section of the AK Scope mount system in the
front sight blade holder lower the mount and align it with the trunnion screw
hole. Next install the trunnion screw and set the front sight lock screw and
your new AK Scope Mounting system is in. The Tri rail is adjustable for easy set
up of your scope to get the perfect eye relief.
Note the AK Mount
With Tri-Rail will work on most standard AK's with a standard wood or plastic
buttstocks.
(Will Not Work With AK pistols, Saiga Rifles, Yugo M70 AK
or any Underfolders, or AMD side folders)
CURRENTLY OUT OF STOCK
| | |
| |
.22 to Weaver/Picatinny Tactical Rail Adaptor Excellent quality and easy to install Lets you convert .22 Rifle base on Ruger 10/22, Marlin model 60 base to Weaver / Picatinny 3.94 inches (100mm) long with 9 slots with grooved rail top to allow for flexible eye relief adjustments. Great for adding the full size scope you wanted. Complete with screws for installation on airgun/.22, including stop pin. Limited lifetime warranty.
Fits Ruger 10//22, Marlin Model 60. and others
.33 Dovetail to Weaver/Picatinny Rail Adaptor
Converts a 3/8" Dovetail rail to a 7/8" Weaver Rail
| Regular Price: | $ 34.95 / Each | | | Sale Price: | $ 6.95 / Each | | You Save: | $ 28.00 / Each |
| |
|
ArmaLite AR-10, AR15, M4, AR10, M16, Rifle Low-Profile riser mount great for AR15 M4 flatop rifles can be used with other rifles with picatinny/weaver rail this low profile riser mount has 0.5" saddle height with see-through design. Precision made from aircraft grade aluminum with matte black hard coat anodizing. 5.7" top picatinny rail with 13 slots and stanag feature for flexible accessory application. Heavy Duty thumb nuts and locking plate for quick easy installation. Attaches to any Picatinny/Weaver mount or AR-15 upper receiver that features Picatinny slot spacing. Limited lifetime warranty
Low-Profile riser mount
Material: Aircraft Grade Aluminum
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 5.7 inch
Width: 1.75 inch
Saddle Height : 0.5 inch
Limited Lifetime Warranty
| Regular Price: | $ 49.95 / Each | | | Sale Price: | $ 11.95 / Each | | You Save: | $ 38.00 / Each |
| |
| |
AR-10, AR15, M16, M4 Medium Profile Riser Mount with Picatinny and STANAG Dimension with a matte black anodized hard coat finish. Mounting compatibilities include STANAG, Picatinny, and Weaver rings, flat top ArmaLite AR-10 A4, AR-15, M16, FALs H&K, MP5 and other rifles with Picatinny/Weaver Rails, Riser mount is (See Through). Precision machined to exact tolerances. Mounting onto a flat top upper receiver in the same manner as the removable carry handle, it securely attaches with thumb nuts and locking plate for quick easy Installation. Anodized black matte finish. Has 13 slots for maximum scope ring adjustments. Limited lifetime warranty.
Medium Profile Riser Mount
Material: Aircraft Grade Aluminum
Pieces: 1
Rail Type: Picatinny/Weaver
13 Slots
No. of Rails: 1
Length: 5.7 inch
Width: 1.75 inch
Height: 1 inch
anodized hard coat finish
0.83" Saddle Height with See-through Design
Limited lifetime warranty
| Regular Price: | $ 29.99 / Each | | | Sale Price: | $ 11.95 / Each | | You Save: | $ 18.04 / Each |
| |
|
Low-profile compact riser mount 0.5" high new gen. Riser mount for rifles and pistols with picatinny/weaver rail. Riser mount is 1.2" long picatinny rail with 2 slots 0.5" saddle height with see-through design. Riser mount has side plate with spring tension for quick easy installation. Precision made from aircraft grade aluminum with matte black hard coated anodizing. Limited lifetime warranty.
Low-Profile Compact Riser Mount
Material: Aircraft Grade Aluminum
Pieces: (1)
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 1.2 inch
Width: 1.75 inch
Height: 0.7 inch
Limited Lifetime Warranty.
| Regular Price: | $ 14.95 / Each | | | Sale Price: | $ 8.25 / Each | | You Save: | $ 6.70 / Each |
| |
| |
Low-profile compact riser mount 0.5" high new gen. Riser mount for rifles and pistols with picatinny/weaver rail. Riser mount is 1.6" long picatinny rail with (3 slots) 0.5" saddle height with see-through design. Riser mount has side plate with spring tension for quick easy installation. Precision made from aircraft grade aluminum with matte black hard coated anodizing. Limited lifetime warranty.
Low-Profile Compact Riser Mount
Material: Aircraft Grade Aluminum
Pieces: (1)
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 1.6 inch
Width: 1.6 inch
Height: 0.7 inch
Limited Lifetime Warranty.
| Regular Price: | $ 17.95 / Each | | | Sale Price: | $ 8.95 / Each | | You Save: | $ 9.00 / Each |
| |
|
Med-Profile compact riser mount 0.83" high new gen. Riser mount for rifles and pistols with picatinny/weaver rail. Riser mount is 1.2" long picatinny rail with (2 slots) 0.83" saddle height with see-through design. Riser mount has side plate with spring tension for quick easy installation. Precision made from aircraft grade aluminum with matte black hard coated anodizing. Limited lifetime warranty.
Med-Profile Compact Riser Mount
Material: Aircraft Grade Aluminum
Pieces: (1)
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 1.2 inch
Width: 1.6 inch
Height: 1 inch
Limited Lifetime Warranty.
| Regular Price: | $ 15.95 / Each | | | Sale Price: | $ 8.95 / Each | | You Save: | $ 7.00 / Each |
| |
| |
Med-Profile compact riser mount 0.83" high new gen. Riser mount for rifles and pistols with picatinny/weaver rail. Riser mount is 1.6" long picatinny rail with (3 slots) 0.83" saddle height with see-through design. Riser mount has side plate with spring tension for quick easy installation. Precision made from aircraft grade aluminum with matte black hard coated anodizing. Limited lifetime warranty.
Med-Profile Compact Riser Mount
Material: Aircraft Grade Aluminum
Pieces: (1)
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 1.6 inch
Width: 1.75 inch
Height: 1 inch
Limited Lifetime Warranty.
| Regular Price: | $ 17.95 / Each | | | Sale Price: | $ 9.95 / Each | | You Save: | $ 8.00 / Each |
| |
|
Hi-Profile compact riser mount 1" high new gen. Riser mount for rifles and
pistols with picatinny/weaver rail. Riser mount is 1.2" long picatinny rail with
(2 slots) 1.0" saddle height with see-through design. Riser mount has side plate
with spring tension for quick easy installation. Precision made from aircraft
grade aluminum with matte black hard coated anodizing. Limited lifetime
warranty.
Hi-Profile Compact Riser Mount
Material: Aircraft Grade
Aluminum
Pieces: (1)
Rail Type: Picatinny/Weaver
No. of Rails:
1
Length: 1.2 inch
Width: 1.6 inch
Height: 1.2 inch
Limited Lifetime Warranty.
| Regular Price: | $ 16.95 / Each | | | Sale Price: | $ 7.95 / Each | | You Save: | $ 9.00 / Each |
| |
| |
Hi-Profile compact riser mount 1" high new gen. Riser mount for rifles and pistols with picatinny/weaver rail. Riser mount is 1.6" long picatinny rail with (3 slots) 1.0" saddle height with see-through design. Riser mount has side plate with spring tension for quick easy installation. Precision made from aircraft grade aluminum with matte black hard coated anodizing. Limited lifetime warranty.
Hi-Profile Compact Riser Mount
Material: Aircraft Grade Aluminum
Pieces: (1)
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 1.6 inch
Width: 1.6 inch
Height: 1 inch
Limited Lifetime Warranty.
| Regular Price: | $ 17.95 / Each | | | Sale Price: | $ 9.95 / Each | | You Save: | $ 8.00 / Each |
| |
|
Fits Mossberg 640 scope mount with Weaver/Picatinny style rail. Scope mount comes with all mounting hardware (fits Mossberg 640 / Marlin Model 60 Rifles) with scope mount pre-drilled holes on top of rifle receiver the holes usually have factory installed screw simply remove them and install the scope mount. The weaver style scope mount base has 11 slots on rail to allow for flexible eye relief adjustments for tactical scope applications or red dot sights. Limited lifetime warranty
Mossberg 640 Marlin Model 60 .22 / Black
Scope Mount
N.W.(Oz): 1.24
Length (Inch) 4.73
Finish: Black
Limited Lifetime Warranty :Yes
Will also fit flat top receivers on : Marlin 9, 45, 30AS, 30AW, 336(all models), 62, 93, 336, 336C, 375, 444, 1993, 1894 Cowboy, 1895, Glenfield 30, Zane grey, Camp-9 carbine, 922M, 989, .22 auto rifle, Mossberg 640, Western field 740.
(Note if you do not have the factory pre-drilled holes on top the receiver you will have to get it drilled and taped.)
| Regular Price: | $ 19.95 / Each | | | Sale Price: | $ 12.95 / Each | | You Save: | $ 7.00 / Each |
| |
| |
3/8" Dovetail to Weaver Adapter This Tactical Rail Adaptor Excellent quality and easy to install Lets you convert 3/8" Dovetail airgun or .22 base to Weaver / Picatinny style rail 3.94 inches (100mm) long with 9 slots with grooved rail top to allow for flexible eye relief adjustments and Adapter lets you choose from a wide selection of weaver style rings. Great for adding the full size scope you wanted. Complete with screws for installation on airgun/.22, including stop pin. Limited lifetime warranty
Fits Ruger 10//22 and all 3/8" Dovetail
.33 Dovetail to Weaver/Picatinny Rail Adaptor
Converts a 3/8" Dovetail rail to a 7/8" Weaver Rail
| Regular Price: | $ 34.95 / Each | | | Sale Price: | $ 6.95 / Each | | You Save: | $ 28.00 / Each |
| |
|
45 Degree Picatinny Rail Angle Mount With 90 Degree Picatinny Rail Mount, Double Picatinny Rails With 3 Slots Angle Mount With Integral Qd Lever Lock System Precision Machined From Super Strong Aircraft-Grade Aluminum Alloy With Anodized Black Matte Finish. Innovative Shared Rails For Versatile Accessory Placements At 45 And 90 Degree Angles To Allow For Instant Aiming Switch Among Iron Sight, Optical Sight, Laser And/Or Tactical Flashlights. Easy User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable To Fit On Any Picatinny Rail. Tight Tolerance Control With Anti-Rotation Feature To Guarantee Most Positive And Repeatable Zero And Re-Zero Capability. Integral Design With Overall Crocodile Profile And Light Weight Machine Cut For Optimal Tactical Applications Limited Lifetime Warranty.
Material: Aircraft-Grade Aluminum Alloy
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 2
Length: 1.58 inch
Width: 2.04 inch
Height: 1.03 inch
| Regular Price: | $ 24.95 / Each | | | Sale Price: | $ 11.95 / Each | | You Save: | $ 13.00 / Each |
| |
| |
AR-15 M16 45-90 Degree Angle Mount Picatinny Rail Mount, Double Picatinny Rails With 1 Slots Angle Mount With Integral Qd Lever Lock System Precision Machined From Super Strong Aircraft-Grade Aluminum Alloy With Anodized Black Matte Finish. Innovative Shared Rails For Versatile Accessory Placements At 45 And 90 Degree Angles To Allow For Instant Aiming Switch Among Iron Sight, Optical Sight, Laser And/Or Tactical Flashlights. Easy User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable To Fit On Any Picatinny Rail. Tight Tolerance Control With Anti-Rotation Feature To Guarantee Most Positive And Repeatable Zero And Re-Zero Capability. Integral Design With Overall Crocodile Profile And Light Weight Machine Cut For Optimal Tactical Applications Limited Lifetime Warranty.
Material: Aircraft-Grade Aluminum Alloy
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 2
Length: 0.87 inch
Width: 2.04 inch
Height: 1.03 inch
| Regular Price: | $ 19.95 / Each | | | Sale Price: | $ 11.95 / Each | | You Save: | $ 8.00 / Each |
| |
|
Low-profile 45 Degree Angle Rail Mount With 5 Slots solid metal designed to attach AR15, M16, M4, and other weapons to provide an offset platform for mounting tactical flashlights, lashlights, redot sights and laser sights without obstructing your primary sight system. Accepts Picatinny and Weaver style accessories. Can be mounted on any quad rail or picatinny/weaver-style rail and Flat Top AR15. (Style 45 Degree Offset Rail Angle Mount) Limited Lifetime Warranty.
Mount Typ 45 Degree Offset Angle Mount
Low-Profile
Fit: Picatinny Rail
Fits Weaver Rail
Size: 5 Slot
Material: Aluminum
Finish: Matte Black
Hard Coated
Limited Lifetime Warranty
| Regular Price: | $ 29.95 / Each | | | Sale Price: | $ 14.95 / Each | | You Save: | $ 15.00 / Each |
| |
| |
45 Degree Angle Rail Mount With 4 Slots solid metal designed to attach AR15, M16, M4, and other weapons to provide an offset platform for mounting tactical flashlights, lashlights, redot sights and laser sights without obstructing your primary sight system. Accepts Picatinny and Weaver style accessories. Can be mounted on any quad rail or picatinny/weaver-style rail and Flat Top AR15. (Style 45 Degree Offset Rail Angle Mount) Limited Lifetime Warranty. Ncstar.
Mount Typ 45 Degree Offset Angle Mount
Fit: Picatinny Rail
Fits Weaver Rail
Size: 4 Slot
Material: Aluminum
Finish: Matte Black
Hard Coated
Limited Lifetime Warranty
| Regular Price: | $ 24.95 / Each | | | Sale Price: | $ 9.95 / Each | | You Save: | $ 15.00 / Each |
| |
|
Under Barrel Handgun Rail For Glockฎ Pistols First Generation. Tactical Add On Accessory Rail Update For Your Glock Pistol. This Add On Tactical Accessory Rail Easily Mounts To The Trigger Guard (No Gunsmithing Required) Rail Let's You Put A Tactical Laser Sight Or Flash Light On Your Glock Or Laser flashlight combo Unit. Made of High Quality T6 Aviation Grade Aluminum. NCS Limited Lifetime Warranty.
For Glock Handguns With Out Bottom Raill
For glocks 17, 19 and 26
Style Under Barrel Handgun Rail
No Gunsmithing Required
Machined From T6 Aviation Grade Aluminum
Limited Lifetime Warranty
Also Available For Glock Pistols, Sig Sauer Pistols, Beretta, and 1911 Pistols.
| Regular Price: | $ 49.95 / Each | | | Sale Price: | $ 29.95 / Each | | You Save: | $ 20.00 / Each |
| |
| |
Under Barrel Handgun Rail For Sig Sauer Pistols Tactical Add On Accessory
Rail Update For Your Sig Sauer Pistol. This Add On Tactical Accessory Rail
Easily Mounts To The Trigger Guard (No Gunsmithing Required) Rail Let's You Put
A Tactical Laser Sight Or Flash Light On Your Sig Sauer Or Laser flashlight
combo Unit. Made of High Quality T6 Aviation Grade Aluminum. NCS Limited
Lifetime Warranty.
For Sig Sauer 226, 228, 229 Handguns With Out Bottom
Raill
Fits Sig Sauer 226, 228, 229
Style Under Barrel Handgun
Rail
No Gunsmithing Required
Machined From T6 Aviation Grade
Aluminum
Limited Lifetime Warranty
Also Available For Glock
Pistols, Sig Sauer Pistols, Beretta, and 1911 Pistols.
| Regular Price: | $ 49.95 / Each | | | Sale Price: | $ 29.95 / Each | | You Save: | $ 20.00 / Each |
| |
|
Under Barrel Handgun Rail For Beretta 92 Pistols Tactical Add On Accessory
Rail Update For Your Beretta 92 Pistol. This Add On Tactical Accessory Rail
Easily Mounts To The Trigger Guard (No Gunsmithing Required) Rail Let's You Put
A Tactical Laser Sight Or Flash Light On Your Beretta 92 Or Laser flashlight
combo Unit. Made of High Quality T6 Aviation Grade Aluminum. NCS Limited
Lifetime Warranty.
For Beretta F92 Handguns With Out Bottom
Raill
Fits Beretta F92
Style Under Barrel Handgun Rail
No
Gunsmithing Required
Machined From T6 Aviation Grade Aluminum
Limited
Lifetime Warranty
Also Available For Glock Pistols, Sig Sauer Pistols,
Beretta 92, and 1911 Pistols.
| Regular Price: | $ 39.95 / Each | | | Sale Price: | $ 27.00 / Each | | You Save: | $ 12.95 / Each |
| |
| |
1911 Under Barrel Handgun Rail For 1911 Pistols Tactical Add On Accessory
Rail Update For Your 1911 Pistol. This Add On Tactical Accessory Rail Easily
Mounts To The Trigger Guard (No Gunsmithing Required) Rail Let's You Put A
Tactical Laser Sight Or Flash Light On Your 1911 Or Laser flashlight combo Unit.
Made of High Quality T6 Aviation Grade Aluminum. NCS Limited Lifetime Warranty.
For 1911 Handguns With Out Bottom Raill
Style Under Barrel
Handgun Rail
No Gunsmithing Required
Machined From T6 Aviation Grade
Aluminum
Limited Lifetime Warranty
Also Available For Glock
Pistols, Sig Sauer Pistols, Beretta, and 1911 Pistols.
| Regular Price: | $ 39.95 / Each | | | Sale Price: | $ 27.00 / Each | | You Save: | $ 12.95 / Each |
| |
|
AR15 M4 Law Enforcement Rated Tri-Rail Single Slot Angle Mount With
Integral Qd Lever Lock System. Mount Allows You To Use The 45 Degree Offsets For
Your Backup CQB Reflex Sight, Lasers Sights And Aiming Systems, And You
Still Can Keep Your Primary Optic On Your Flatop. MAT012245.
Precision Machined From Aircraft-Grade Aluminum Alloy & Steel With
Anodized Black Matte Finish. Innovative Shared Rails For Versatile Accessory
Placements At 45 And 90 Degree Angles To Allow For Instant Aiming Switch Among
Iron Sight, Optical Sight, Laser And/Or Flashlight. User Friendly Ergonomic
Quick Detach/Lock Lever Fully Adjustable To Fit On Any Picatinny Rail. Tight
Tolerance Control With Anti-Rotation Feature To Guarantee Most Positive And
Repeatable Zero And Re-Zero Capability. Integral Design With Overall Crocodile
Profile And Light Weight Machine Cut For Optimal Tactical Applications. Limited
Lifetime Warranty.
Specs
Material: Steel & HD T6 Aluminum
Pieces: 1
Rail Type: Picatinny/Weaver
No. Of Rails: 3
Length: 1.77 Inch
Width: 2.06 Inch
Height: 0.86 Inch
Limited lifetime warranty
| Regular Price: | $ 19.95 / Each | | | Sale Price: | $ 11.49 / Each | | You Save: | $ 8.46 / Each |
| |
| |
AR15 M4 Law Enforcement Rated Tri-Rail 3Slot Angle Mount With
Integral Qd Lever Lock System. Mount Allows You To Use The 45 Degree Offsets For
Your Backup CQB Reflex Sight, Lasers Sights And Aiming Systems, And You
Still Can Keep Your Primary Optic On Your Flatop. MAT032263
Precision Machined From Aircraft-Grade Aluminum Alloy & Steel With
Anodized Black Matte Finish. Innovative Shared Rails For Versatile Accessory
Placements At 45 And 90 Degree Angles To Allow For Instant Aiming Switch Among
Iron Sight, Optical Sight, Laser And/Or Flashlight. User Friendly Ergonomic
Quick Detach/Lock Lever Fully Adjustable To Fit On Any Picatinny Rail. Tight
Tolerance Control With Anti-Rotation Feature To Guarantee Most Positive And
Repeatable Zero And Re-Zero Capability. Integral Design With Overall Crocodile
Profile And Light Weight Machine Cut For Optimal Tactical Applications. Limited
Lifetime Warranty.
Specs
Material: Steel & HD T6 Aluminum
Pieces: 1
Rail Type: Picatinny/Weaver
No. Of Slots: 3
No. Of Rails: 3
Length: 2.48 Inch
Width: 2.1 Inch
Height: 0.86 Inch
Limited lifetime
warranty
| Regular Price: | $ 24.95 / Each | | | Sale Price: | $ 11.95 / Each | | You Save: | $ 13.00 / Each |
| |
|
UTG LE Rated 1-Slot Single Rail Angle Mount With Integral QD Lever Lock
System. AR15 M4 Law Enforcement Rated 3Slot Angle Mount With Integral Qd
Lever Lock System. Mount Allows You To Use The 45 Degree Offsets For Your Backup
CQB Reflex Sight, Lasers Sights And Aiming Systems, And You Still Can Keep
Your Primary Optic On Your Flatop. MAS0340.
Precision Machined From Aircraft-Grade Aluminum Alloy & Steel With
Anodized Black Matte Finish. Innovative Shared Rails For Versatile Accessory
Placements At 45 Angle To Allow For Instant Aiming Switch Among Iron Sight,
Optical Sight, Laser And/Or Flashlight. User Friendly Ergonomic Quick
Detach/Lock Lever Fully Adjustable To Fit On Any Picatinny Rail. Tight Tolerance
Control With Anti-Rotation Feature To Guarantee Most Positive And Repeatable
Zero And Re-Zero Capability. Integral Design With Overall Crocodile Profile And
Light Weight Machine Cut For Optimal Tactical Applications. Limited Lifetime
Warranty.
Specs
Material: Steel & HD T6 Aluminum
Pieces: 1
Rail Type: Picatinny/Weaver
No. Of Slots: 3
No. Of Rails:
1
Length: 1.57 Inch
Width: 2.3 Inch
Height: 0.59 Inch
Limited lifetime
warranty
| Regular Price: | $ 24.95 / Each | | | Sale Price: | $ 9.95 / Each | | You Save: | $ 15.00 / Each |
| |
| |
UTG Law Enforcement Rated 1-Slot Single Rail Angle Mount With Integral
Qd Lever Lock System Precision Machined From Aircraft-grade Aluminum Alloy with
Anodized Black Matte Finish. Smart Rail for Versatile Accessory Placement
at 45 Degree Angle to Allow for Instant Aiming, Switching Between Iron Sight,
Optical Sight, Laser and/or Flashlight. Robust and User Friendly Ergonomic Quick
Detach/Lock Lever Mount, Fully Adjustable to Fit on Any Picatinny Rail. Tight
Tolerance Control with Anti-rotation Feature to Guarantee Most Positive and
Repeatable Zero and Re-zero Capability.
Overall Low Profile Crocodile
Design and Light Weight Machine Cut for Optimal Tactical Applications.
MAS0122.
Qd Lever Lock
Anodized Black
Pieces: 1
Material: Aircraft-Grade Aluminum
Rail Type: Picatinny/Weaver
Placement at 45 Degree Angle
No. of Rails: 1
Length: 0.86 inch
Width: 2.3 inch
Height: 0.59 inch
| Regular Price: | $ 14.95 / Each | | | Sale Price: | $ 8.95 / Each | | You Save: | $ 6.00 / Each |
| |
|
AR-15/M16 Quick Release Weaver Style Cantilever Mount with Detachable Rear
Ring Introducing the most Versatile Mount to the NcSTAR Line-up. This Single
Accessory will allow you to mount virtually any rifle scope of red dot sight to
your rifle in a number of different configurations. The Famous NcSTAR QR
Lever System makes mounting the MARCQ to your flat top Lightning Fast. The
Rings are 30mm with 1 inch inserts, and the Rear Ring rides on a dovetail so you
can adjust the spacing for customized fit. The Rear Ring is also removable
so you can set up your Red Dot Sight to Co-witness with your Iron Sights.
Made of Hard Anodized Aluminum and Solid Steel, once youre locked in this mount
isnt going anywhere! (Optics shown not included).
Specs
Can be used with 1" Scopes, RedDot Sights and 30 MM
Scopes
Red Dot Sight Co-witness With Iron Sights
Made Of Solid
Steel & Hard Anodized Aluminum
Style Cantilever Mount Quick Release
Mount Base Weaver Style
| Regular Price: | $ 39.95 / Each | | | Sale Price: | $ 29.99 / Each | | You Save: | $ 9.96 / Each |
| |
| |
Dual Weaver Base 34mm Scope Adaptor Enhance the Versatility of your Ncstar
Mark III Tactical Scope with the M2RD34 Mount. With this Dual Rail scope
adaptor you can easily mount your AQPTF Flashlight, ATPRLS Laser, or your DDAB
Red Dot Sight freeing up space on your rifle. With the all of your accessories
at the tips of your fingers your rifle will be ready when you need it most.
(Optics and accessories shown not included)
| Regular Price: | $ 19.99 / Each | | | Sale Price: | $ 11.00 / Each | | You Save: | $ 8.99 / Each |
| |
|
Dual Weaver Base 1" Scope Adaptor Enhance the Versatility of your 1 Inch
Tactical Scope with this Dual Rail scope adaptor you can easily mount
your Tactical Flashlights, Or Laser Sights Or Micro Red Dot
Sight freeing up space on your rifle. With the all of your accessories at the
tips of your fingers your rifle will be ready when you need it most. Allows The
Shooter To Mount Two Accessories To 1 Inch Tube Scopes with space on scope for
mount. (Optics and accessories shown not included)
Dual Weaver Style 1 Inch Scope Adapter.
Allows The Shooter To
Mount Two Accessories To 1 Inch Tube Scope.
Constructed Of High
Quality Anodized Aluminum.
Length 1.8.
| Regular Price: | $ 19.99 / Each | | | Sale Price: | $ 11.00 / Each | | You Save: | $ 8.99 / Each |
| |
| |
Dual Weaver Base 30mm Scope Adaptor Enhance the Versatility of
your 30mm Tactical Scope with this Dual Rail scope adaptor you can easily
mount your Tactical Flashlights, Or Laser Sights Or Micro Red Dot
Sight freeing up space on your rifle. With the all of your accessories at the
tips of your fingers your rifle will be ready when you need it most. Allows The
Shooter To Mount Two Accessories To 1 Inch Tube Scopes with space on scope for
mount. (Optics and accessories shown not included)
Dual Weaver Style 30mm Scope Adapter.
Allows The Shooter To
Mount Two Accessories To 30mm Scope Tube.
Constructed Of High
Quality Anodized Aluminum.
Length 1.8.
| Regular Price: | $ 19.99 / Each | | | Sale Price: | $ 11.00 / Each | | You Save: | $ 8.99 / Each |
| |
|
SKS Soviet Semi-automatic rifle Scope Mount for the SKS 7.62x39mm Rifles
Mount Made from Steel. Comes with a set of 1 Scope Rings. Easy Installation.
All Required Hardware Included. Fits Most SKS Rifles and Variants. Limited
Lifetime Warranty.
Mount Made from Steel
1 Scope Rings
Included
Easy Installation
All Required Hardware Included
Limited
Lifetime Warranty
Fits Most SKS Rifles and Variants.
Russian
(19491956)
Soviet Honor Guard SKS Rifles
Chinese Type 56 SKS
Rifles
Romanian SKS Rifle
Polish SKS Rifles
Yugoslavian M59 /66 SKS
Rifles
Albanian SKS Rifles
East German SKS Rifles
Vietnames Typ1 SKS
Rifles
| Regular Price: | $ 39.99 / Each | | | Sale Price: | $ 24.99 / Each | | You Save: | $ 15.00 / Each |
| |
| |
.22 Rifle / Airgun Dovetail To Picatinny/Weaver Rail Adaptor Innovative Rail
Platform to Convert Most .22/Airgun Rails To Picatinny/Weaver Rail. Top
Slot with Spring Tension Retraction/Expansion Design to Snap into
Picatinny/Weaver Base. Extremely Low Profile and Lightweight. Precision and
Repeatable Alignment. Easy Installation with Most .22/Airgun Rails, 2PCs/Set.
Limited lifetime warranty. MNT-DT2PW01.
.22/Airgun Dovetail To
Picatinny/Weaver Rail Adaptor
Innovative Rail Platform To Convert
Most .22/Airgun Rails
Easy Installation With Most .22/Airgun Rails,
2Pcs/Set
Top Slot With Spring Tension
To Snap Into
Picatinny/Weaver Base
Retraction/Expansion Design
Extremely
Low Profile And Lightweight
Precision And Repeatable Alignment
Material: Aluminum
Pieces: 2
Rail Type: Picatinny/Weaver
No.
of Rail Slots: 1
Length: 1 inch
Width: 0.93 inch
Height: 0.24
inch
Limited lifetime Warranty
| Regular Price: | $ 14.95 / Each | | | Sale Price: | $ 6.50 / Each | | You Save: | $ 8.45 / Each |
| |
|
Talon 2 Aluminum Straight Picatinny Rail
Military Type III Anodized,
6061 T6 Aluminum
One 2 Dovetail Picatinny Rail
Mount all of Your
Favorite Accessories
Loctite on Screws
Manufactured in the USA
Limited Lifetime Warranty
Fits ATI's Talon 5-Sided Aluminum Shotgun Forend
(A.5.10.1160)
| Regular Price: | $ 12.00 / Each | | | Sale Price: | $ 10.49 / Each | | You Save: | $ 1.51 / Each |
| |
| |
Talon 6 Aluminum Straight Picatinny Rail
Military Type III Anodized,
6061 T6 Aluminum
One 6 Dovetail Picatinny Rail
Mount all of Your
Favorite Accessories
Loctite on Screws
Manufactured in the USA
Limited Lifetime Warranty
Fits ATI's Talon 5-Sided Aluminum Shotgun Forend
(A.5.10.1160)
| Regular Price: | $ 20.00 / Each | | | Sale Price: | $ 18.95 / Each | | You Save: | $ 1.05 / Each |
| |
|
Mount Is Designed For AR-15 Or M-16 A2 Carry Handles. 30mm Tube For 30mm
Tube Tactical Scope or Accessories. This Mount Is Type III Hard Coat Anodized.
Style A2 Carry Handle Mounting. T6 Aircraft Grade Aluminum Matte Black.
| Regular Price: | $ 19.95 / Each | | | Sale Price: | $ 9.99 / Each | | You Save: | $ 9.96 / Each |
| |
| | |
