| |
Item |
Price |
Image |
Action |
 |
| |
Ruger 10/22 See Through Mount Mil-Spec Picatinny
This aftermarket Ruger® 10/22® rifle scope mount is see-through weaver/picatinny MIL-STD 1913 scope rail mount. Scope mount allows you to use your ruger 10/22 rifle factory iron sights by looking through sight channel below the picatinny rail. Scope mount fits onto the top of the Ruger 10/22 receiver utilizing the pre-drilled holes on the receiver. Mount Includes mounting hardware (no rifle modifications necessary to rifles with pre-drilled holes). Made from black hard anodized aluminum. Length: 4.7". Fits Ruger 10/22 takedown model also with pre-drilled holes. Limited Lifetime Warranty.
Note: You can still use the factory iron sights with the rail mounted onto the receiver. |
$ 9.99/ Each |
|
|
|
|
|
|
| |
Scorpion Six Position Stock Buttpad Recoil System
ATI’s Scorpion Recoil System features a brand new material that absorbs the
initial shockwave or the felt punch of the recoil. The Scorpion Recoil System
increases the shooter’s comfort while reducing the muzzle lift. Recoil Impact is
Absorbed - Shooting Anything from a 3.5" Magnum Turkey Load to a Door Breaching
Load, can now be Done with no Pain Being Transferred to the Shooter. Reduces the
Challenge to Reacquire the Target by Minimizing the Muzzle Lift. Not Affected by
Chemicals. Remains Flexible in Extreme Temperatures. Eliminates the Punch of the
Recoil. Removes Limitations from Spring and Piston Type Recoil Suppression
Systems. Absorbs the Energy Wave Regardless of the Load Size Which Makes it
Perfect for any Type of Rifle or Shotgun. Manufactured in the USA. ATI Limited
Lifetime Warranty.
Fits ATI’s Strikeforce, Tactical Shotgun Six Position and Six Position Pistol
Grip Stocks for, AK, AR, H&R, Maverick 88, Mossberg 500/535/590/835, NEF,
Remington 870/7600, Rossi, Ruger Mini 14/30 and Ruger 10/22, SKS and Winchester
1200/1300. |
$ 19.99/ Each |
|
|
|
|
|
|
| |
ATI TactLite Scorpion X2 Razorback Recoil Pad Upgrade Kit
ATI gunstocks Scorpion X2 TactLite Recoil Pad Upgrade Kit for ATI's Tactlite stocks has 1.5 inches of thickness for recoil absorption of heavy duty loads. The X2 razorback Recoil Reducing Butt-Pad allows recoil impact to be absorbed with no pain being transferred to the shooter and remains flexible in extreme temperatures.1 1/2" Thick Butt-Pad. ATI Limited Lifetime Warranty. Made in the USA.
Mounting plate included
ATI Manufactured in the USA
Limited lifetime warranty
Fits: ATI's Tactlite Stocks Only.
Also available in X1 Standard Thickness Razorback Recoil Pad Item # A.5.10.2531 |
$ 22.99/ Each |
|
|
|
|
|
|
| |
Universal Heavy Duty Barrel Mount Bipod
This Universal Heavy Duty Bipod will mount on rifle or shotgun barrel, it fits ruger 10/22, Tippman paintball gun, airsoft gun, all SKS Rifles, Colt AR-15, M16, M4, Mosin Nagant Rifle, Remington Rifles, Mossberg Shotguns, Winchester Rifles and shotguns, Enfield Rifles, AK, Mauser, Ruger, Marlin, H&R, NEF, Rossi and more. It is a super deal I think better then any harris bipod costing a lot more. Made from light weight strong aircraft grade aluminum. Comes with a Lifetime Warranty.
Fully adjustable.
Extends from 8" to 13"in 3/4" increment.
Spring Tension for Quick Deployment.
Folds up under barrel.
Adjustable Legs.
Lifetime Warranty.
Note: Some .22 Barrels may require Shims. |
$ 24.95/ Each |
|
|
|
|
|
|
| |
Tactical Green Laser Sight With Weaver & Base Pressure Switch
This Military style universal green laser sight for your rifle or shotgun features a one-inch Weaver-Picatinny laser mount and a tactical laser remote pressure switch with a momentary end cap switch. The purpose of this tactical green laser sight is to deliver fast target acquisition anytime day or night. This green laser sight is suitable for any rifle, shotgun, or AR pistol. It is quick and easy to operate and mount. This tactical laser sight It is great for military use, police, and SWAT. It is suitable for all environments, from the forest to the desert. It has O-ring seals for weatherproofing. It includes a pressure pad switch and a push momentary switch button, as well as an allen wrench for mounting and a 3 volt lithium battery.The range is up to 1-mile at night, and the range is with optimum weather conditions. The green laser beam is superior to red lasers. It is even visible in broad daylight, 20 times brighter than red laser gun sights. This laser is easily adjusted with standard X-Y windage and elevation adjustments. This laser attaches to the Weaver-Picatinny rails system and scope mounts found on many tactical rifles. The laser sight has an aircraft grade aluminum construction with a black hard anodized finish. manufactures a one year warranty.
Universal Green Laser Sight System Specifications
Weight. 5.2 Ounces With Batteries
Length. 3.95" X 1.0"
Power Output.<5Mw Continuous (Class Iiia)
Module (Standard) 532 Nm Green Laser Diode
Range Up To 1-Mile At Night With Optimum Conditions
Range (Up To 200 Yards Day Time)
Batteries(1) Cr123A 3Volt Lithium Battery
Battery Life. Over 3.00 Hours Continuous
Beam Size Approx. 1.75" @ 100 Yards
Adjustment .5 Feet Adjustment Movement
Windage And Elevation
Color: Black
Material: T6 Aluminum
Water-Resistant O-Ring Sealed For Weatherproofing.
Comes With Coiled Remote Tactical Laser Switch.
Comes With Battery
Manufactures one year warranty.
( We suggest Extra CR123A 3Volt Lithium Batteries For Flashlight Item # 123A Batteries ) |
$ 59.99/ Each |
|
|
|
|
|
|
| |
Ruger® 10/22 Strikeforce Stock Six Position Adjustable Side Folding TactLite Stock Black
This ATI aftermarket Ruger 10/22® Strikeforce stock conversion kit is a six-position adjustable black collapsible side-folding tactical stock for the Ruger 10/22 carbine rifle. This upgraded Ruger 10/22 tactical stock conversion features a scorpion recoil-reducing system. It is the perfect upgrade for your Ruger 10/22 carbine rifle stock. This synthetic black ATI Ruger 10/22 Strikeforce stock side folding conversion kit can be fired from a folded position. This tactical stock conversion kit for your Ruger 10/22 features picatinny rails for mounting accessories and a TrakLOCK system that eliminates horizontal and vertical movement of the stock on the buffer tube, provides smooth and secure stock adjustments, and eliminates the need for secondary locking mechanisms with no snag points. It comes with a thin Scorpion recoil pad and dual-sided QD sling attachment points with sling swivel studs. The Scorpion Recoil System includes the Scorpion Razorback Recoil Pad and a non-slip, removable Scorpion Recoil Pistol Grip with Sure-Grip Texture. The felt recoil impact is absorbed, with no pain being transferred to the shooter. This reduces the challenge of reacquiring the target by minimizing the muzzle lift. It is not affected by chemicals and remains flexible in extreme temperatures. ATI Lifetime Limited Warranty "Made in the USA."
Note: Fits Most Ruger® 10/22®. Will not work with rifles equipped with a bull barrel. (Does Not Fit Ruger® 10/22® Takedown®)
One 4” Picatinny Rail
Three 2” Picatinny Rails
One 2” Swivel Stud Picatinny Rail
Blank Covers for When Rails are Not in Use
Additional Ventilation in Forend and Top Cover
Removable/Adjustable Cheekrest System
Elongated Design to Fit All Users
Includes Short Cheekrest with ½”
of Adjustment Slot for Tactical Sling Attachment
Two Sling Swivel Studs
Mounting Hardware Included
DuPont® Extreme Temperature Glass Reinforced Polymer
ATI Manufactured in the USA
ATI Limited Lifetime Warranty
Note: We Suggest Tactical QD Single Point Bungee Sling With Swivel To Go With This Stock Item # A.5.10.2542
We Also Suggest You Get This TactLite Stock Recoil Pad Upgrade Kit A.5.10.2530 or A.5.10.2531. |
$ 89.99/ Each |
|
|
|
|
|
|
| |
Ruger 10/22® Strikeforce Stock Six Position Adjustable Side Folding Flat Dark Earth
The flat dark earth ATI Ruger 10/22® Strikeforce stock conversion kit is a six-position collapsible, adjustable, side-folding tactical stock for the Ruger 10/22 carbine rifle. This upgrade Ruger 10/22 tactical stock conversion features a scorpion recoil system that is the ideal upgrade for your Ruger 10/22 carbine rifle. This fde ATI Ruger 10/22 Strikeforce stock side folding conversion kit can be fired from a folded position. This tactical stock conversion kit for your Ruger 10/22 features picatinny rails for mounting accessories and a TrakLOCK system that eliminates horizontal and vertical movement of the stock on the buffer tube, provides smooth and secure stock adjustments, and eliminates the need for secondary locking mechanisms with no snag points. It comes with a thin Scorpion recoil pad and dual-sided QD sling attachment points with sling swivel studs. The Scorpion Recoil System includes the Scorpion Razorback Recoil Pad and a non-slip, removable Scorpion Recoil Pistol Grip with Sure-Grip Texture. The felt recoil impact is absorbed, with no pain being transferred to the shooter. This reduces the challenge of reacquiring the target by minimizing the muzzle lift. It is not affected by chemicals and remains flexible in extreme temperatures. ATI Lifetime Limited Warranty "Made in the USA."
Note: Fits Most Ruger® 10/22®. Will not work with rifles equipped with a bull barrel. (Does Not Fit Ruger® 10/22® Takedown®)
One 4” Picatinny Rail
Three 2” Picatinny Rails
One 2” Swivel Stud Picatinny Rail
Blank Covers for When Rails are Not in Use
Additional Ventilation in Forend and Top Cover
Removable/Adjustable Cheekrest System
Elongated Design to Fit All Users
Includes Short Cheekrest with ½”
of Adjustment Slot for Tactical Sling Attachment
Two Sling Swivel Studs
Mounting Hardware Included
DuPont® Extreme Temperature Glass Reinforced Polymer
ATI Manufactured in the USA
ATI Limited Lifetime Warranty
Note: We Suggest Tactical QD Single Point Bungee Sling With Swivel To Go With This Stock Item # A.5.10.2542
We Also Suggest You Get This TactLite Stock Recoil Pad Upgrade Kit A.5.10.2530 or A.5.10.2531. |
$ 89.99/ Each |
|
|
|
|
|
|
| |
Universal Featherweight Bipod-Swivel Bipod
This universal light-weight adjustable bipod for rifles with a sling swivel stud mount adjuts from 9" to 13" inches. This light-weight bipod fits any firearm with a sling stud and AR-15 type rifles. It weighs just 6 oz., and includes all the mounting hardware. The bipod has non-slip rubber feet, can be adapted to swivel or stay fixed. The bipod snap-n-lock" button lets you fold legs forward, rearward, or downward. The adjustable bipod is made from dupont extreme temperature glass reinforced polymer. It will not scratch, rust or dent. includes a stock protective pad for mounting. ATI made in the USA. Limited lifetime warranty.
Fits Any Firearms with a Sling Swivel Stud and AR-15 Type Rifles. Note: Customer assembly required to determine Swivel or Non-Swivel Configuration or AR-15 Configuration. Push Snap-N-Lock" Button to Fold Legs Forward, Rearward or Downward. |
$ 39.95/ Each |
|
|
|
|
|
|
| |
Tactical Red Dot Reflex Sight With 4 Reticle
This is the greatest affordable reflex sight for the AR-15 and other tactical rifles, and it also works well on shotguns. This tactical reflex sight features 1X magnification and four reticle configurations in red and green dot with five brightness levels for any condition, day or night. This is one of the best red dot reflex holographic sights on the market for the money. It has full windage and elevation adjustment, as well as quick and easy target acquisition for tactical operations, making it a perfect sight for any AR platform or shotgun. The on/off and color switches are controlled by digital push buttons on sight. To change colors, hold for 3 seconds, and to turn off the sight, hold for 5 seconds. The reflex sight is made of aircraft-grade aluminum alloy and finished in a black hard anodized finish. For flexible attachment on AR rifles and shotguns, there is no limit to the eye relief. Batteries are included with the package. Reticles are available in Dot, Bullseye, Cross, and Starburst LED (Light Emitting Diode) patterns that are completely safe for the eyes. Quick installation and removal thanks to the QD integral weaver/picatinny mounting deck.
Specs:
Heavy Recoil Rated
Material: Aircraft-Grade Aluminum
Integral Windage And Elevation
Red/Green Dual Illumination
4 Reticle Options
Magnification: 1X
Objective: 22mm
Lens Coating: platinum
Eye Relief: Unlimited
Exit Pupil: Unlimited
Parallax Setting: 100 Yds
Batteries: LR41 Included
Weaver/Picatinny Mount
Dimensions:L-3.6" W-2.4" H-2.2"
Battery Type: LR41/AG3 (3) included
We suggest extra batteries to go with your refex sight AG3. |
$ 59.99/ Each |
|
|
|
|
|
|
| |
Ncstar Reflex Sight With 4 Reticle & QD Mount
Ncstar Reflex Sight D4BLQ With Four Blue Reticles & QD Mount NEW Locking Quick Release Mount for mounting onto Weaver/Picatinny type rails Blue colored Four Reticle set: Dot, Bullseye, Cross, Bullseye. LED (Light Emitting Diode) 100% Safe for the Eyes. Unlimited Eye Relief for flexible mounting position on a firearm.Black Anodized Aluminum Body. Tools for adjust Reflex Optics Zero and Rubber Lens cap are included. Limited Lifetime Warranty
Specs
Style: Reflex Sight
Light Emitting Diode
Magnification: 1 X
4 Red Reticle Set: Dot, Bullseye, Cross, Bullseye
Locking Quick Release Mount Weaver/Picatinny
Led 100% Safe For The Eyes
Unlimited Eye Relief
Black Anodized Aluminum Body
Uses 1 Cr2032 Battery (Included)
Tools For Adjusting
Rubber Lens Cap Are Included
Length: 3.2"
Limited Lifetime Warranty
|
$ 54.99/ Each |
|
|
|
|
|
|
| |
1X25 Red & Green Dot Reflex Sight
This Is a great economical tactical 5 MOA red dot/green dot sight perfect for Ruger 10/22 Rifles Or Marlin 60 Rifle or any .22 Cal Weapons. Features a convertible mount for Weaver and 3/8" Dovetail rail. Even Works Great On A Spyder MR4 Or Tippmann Paint Ball Guns. The Sight Is Compact And Low Profile Perfect For Rapid Fire Or Moving Target Shooting, Allows For Quick Target Acquisition Great For CQB. Lens Has Anti-Reflective Coating. Red Dot & Green Dot Sight Has 3 Brightness/Intensity Levels For low Light Shooting.
Comes With Interchangeable Integrated Mount Weaver / Dovetail Mount Fits Both Style Scope Rails. Multi Position Rheostat Knob For Red Or Green Illumination Led (Light Emitting Diode) 100% Safe For The Eyes. Unlimited Eye Relief And Field Of View. Limited Lifetime Warranty.
Style: Reflex Sight
Light Emitting Diode
Magnification: 1 X
Red Dot Color Red & Green
Heavy Recoil Proof: Yes
Made From T 6 Aluminum
Objective Dia. Mm: 25
Dot Size:5 Moa
Click Val: 1 Moa
Finish: Black
Len Coating: Clear
Length (Inches): 4.06"
Free Batteries Included.
Mount: Interchangeable (Weaver Style/ 3/8¡± Dovetail)
Ncstar Limited Lifetime Warranty
We suggest Extra Scope Batteries Item # CR2032 ) |
$ 21.95/ Each |
|
|
|
|
|
|
| |
Red Dot Reflex Optic With Weaver Picatinny Mount FDE Tan
This FDE/Tan budget friendly Red dot reflex optic sight with an aluminum body features a red Led (light emitting diode) 100% safe for the eyes. The Red dot sight has an unlimited eye relief for flexible mounting with 1 x magnification and 24.0 x 34.0 mm objective lens. This reflex optic has a standard on/off switch and a integrated mount that is compatible with weaver/ picatinny/ mil-std 1913 type rails. Uses CR2032 battery (included). Color fde/tan. The sight is made from hard anodized aluminum.
Magnification: 1X
Reticle: Red Dot
Dot Size: 3 Moa
Objective Lens: 24 X 34 Mm
Lens Coating: Platinum
Mount Style Weaver-Picatinny
Battery Type: Cr2032 (Inlcuded)
Length: 4.6"
Width: 1.5"
Height: 2.1" |
$ 12.95/ Each |
|
|
|
|
|
|
| |
3-9x40 Illuminated Rifle Scope Compact P4 Sniper Reticle
This tactical 3-9x40 Illuminated Rifle Scope is compact with a dual illuminated red or green P4 Sniper Reticle that gives you fast target acquisition with variable magnification, perfect for tactical rifles and hunting. The 3-9x40 scope body is milled from one solid piece of aircraft grade aluminum to withstand constant heavy recoil. The scope has a fogproof and shock-resistant housing that is nitrogen charged with weather-resistant seals and a green-fused multi-coated lens to provide superior light transmission, resolution, and scratch resistance. The windage and elevation adjustments are perfect for zeroing in the scope. This is a stellar scope and multi-purpose optic designed for your hunting rifle or tactical rifle. Lens caps and see-thru aluminum Weaver/Picatiny rings are included. Limited Lifetime Warranty
Scope Specs:
Nitrogen Filled
Fog Proof
Shockproof
Rainproof
Heavy Duty Recoil Rated
Magnification: Zoom 3X-9X
Objective Dia. (Mm) : 42.00
Tube Dia. 1 Inch
Field Of View @ 100 Yrs (Feet) : 37.5-12.4
Approximate Eye Relief (Inch) : 3.00
Illuminated Red Or Green Reticle
Scope Rings Weaver/ Picatinny
Lens Caps
Fully Coated Lenses
Lens Coating: Green
Reticle : P4 Sniper
Length (Inches) :7.37 |
$ 69.99/ Each |
|
|
|
|
|
|
| |
Ruger® 10/22® Muzzle Brake Flash Hider
This aftermarket Ruger 10/22® muzzle brake flash hider fits standard Ruger 10/22 rifles and takedown models. Muzzle brake is specially made to fit your 10/22 it just slips on your standard rifle barrel fast and easy. The tactical flash hider for RUGER 10/22® rifles is precision steel heat treated muzzle break that reduce recoil and flash. This high quality muzzle break device makes for a precision slip on fit over the muzzle of your rifle and secured by a single set screw on the bottom, with no modifications to your 10/22®. This muzzle brake has Military style black oxide finish for a great tactical look on your rifle. One year limited warranty.
Fits standard Ruger 10/22 rifles and takedown models. Does not fit bull barrels. |
$ 19.99/ Each |
|
|
|
|
|
|
| |
Deluxe Tri Rail Barrel Mount 2 Slot
This universal gun tri-rail barrel mount with two slots features tactical laser or flashlight clamping feature. The barrel mount has 3 Picatinny rails with two slots so you can mount a tactical flashlight, tactical laser vertical grip and bipod. The barrel mount works great with all rifles, Remington 7600, SKS Rifles, AR-15, M-16, AK 47, Romanian AK Draco Pistol, Ruger 10/22, Ruger Mini-30/14 Remington 7600 ect. Mil-Spec Rail.
Lifetime Warranty Leapers.
Solid Aluminum Construction
Matte Black Finish
Clever 3 Piece Design for Clamping Rifle Barrel and Laser Tube
Length: 1.2" (2 slots each side)
Compatible Firearm Barrel Range: Diameter.51"-.78"
Laser Clamping Range: Diameter.51"-.78" |
$ 7.99/ Each |
|
|
|
|
|
|
| |
Universal Single-rail Rifle Barrel Mount 5 Slots
This Universal Single-Rail Barrel Mount has 5 Picatinny slots and a solid aluminum construction with a matte black finish. The barrel mount features a smart, two-piece design for clamping on the rifle barrel and is compatible with firearms that have a barrel range of .51 to .78 inches. The Picatinny single-rail barrel mount goes on your rifle fast and easily. No gunsmith is required for installation.
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 2.4 inch
Width: 1.4 inch |
$ 7.99/ Each |
|
|
|
|
|
|
| |
UTG 11mm (3/8") Dovetail to Weaver/Picatinny Adapter, 2pcs
The MNT-DT2PW01 UTG 11mm (3/8") Dovetail to Weaver/Picatinny Adapter is a innovative rail platform that insert into Weaver or Picatinny rings so they'll fit the smaller 3/8" or 11mm rails and dovetails found on airguns and .22 rimfire guns. The Adapter top slot with spring tension retraction and expansion design snap into Picatinny/Weaver Base found on scope rings. Extremely Low Profile and Lightweight. Precision and Repeatable Alignment. Easy Installation with Most .22/Airgun Rails, 2PCs/Set. Limited lifetime warranty. MNT-DT2PW01.
.22/Airgun Dovetail To Picatinny/Weaver Rail Adaptor
Innovative Rail Platform To Convert Most .22/Airgun Rails
Easy Installation With Most .22/Airgun Rails, 2Pcs/Set
Top Slot With Spring Tension
To Snap Into Picatinny/Weaver Base
Retraction/Expansion Design
Extremely Low Profile And Lightweight
Precision And Repeatable Alignment
Material: Aluminum
Pieces: 2
Rail Type: Picatinny/Weaver
No. of Rail Slots: 1
Length: 1 inch
Width: 0.93 inch
Height: 0.24 inch
Limited lifetime Warranty |
$ 13.99/ Each |
|
|
|
|
|
|
| |
Ruger® 10/22 Picatinny Rail Mount For Scopes and Optics UTG
This UTG® 26-slot scout slim rail mount for Ruger® 10/22 rifles comes with mounting screws and a weaver/picatinny rail for mounting scopes and optics. This is one cool tactical upgrade picatinny rail scope mount designed just for Ruger 10/22 rifles. The free float tactical scope mount rail does not touch the barrel or forend. This UTG Ruger 10/22 scope mount is CNC precision machined from T6 aircraft grade aluminum and slotted to fit your Ruger 10/22's rear iron sight. The scope mount has ventilation holes for weight reduction and tactical appearance. It easily bolts on to the upper receiver on Ruger 10/22 rifles with pre-existing factory holes. UTG limited lifetime warranty.
For Ruger 10/22 Rifle With Pre Existing Factory Holes On Upper Receiver.
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 11.7 inch
Width: 1.16 inch
Height: 0.9 inch
Color Is Black
Limited Lifetime Warranty |
$ 18.99/ Each |
|
|
|
|
|
|
| |
Ruger 10/22 Scope Mount Rail Weaver/Picatinny
This MRUB1022V2 Ruger 10/22 scope mount weaver/picatinny MIL-STD 1913 rail mounts onto the top of your Ruger 10/22 receiver. Scope mount rail fits pre-drilled factory holes on most Ruger 10/22 rifles including the Ruger 10/22 takedown. The scope mount has a centerline sight channel machined into the rail so you can still use the factory iron sights with the rail mounted onto the receiver. Includes mounting hardware (no rifle modifications necessary on rifles with pre-drilled factory holes). Black hard anodized aluminum construction length: 4.7". Limited Lifetime Warranty.
Note: You can still use the factory iron sights with the rail mounted onto the receiver. |
$ 12.99/ Each |
|
|
|
|
|
|
| |
Ruger® 10/22® Picatinny / Weaver Rail Mount UTG PRO Made in USA
The Leapers® MTU030T22 UTG PRO® Ruger 10/22® picatinny/weaver rail mount for scopes and optics is see through and made in USA and included set screws. Ruger 10/22 rail is Precision Machined from Aircraft Grade Aluminum with Matte Black Hard Coat Anodized. The UTG Ruger 10/22 picatinny rail mount for scopes and optics has contoured bottom and perfectly Fits Ruger® 10/22® with Drilled and Tapped Receiver. Low Profile Design with U-cut for Weight Reduction With 4.67 Overall Length with 11 Picatinny Rail Slots for Dot Sights, Rear Sights, and Flexible Positioning of Magnified Optics for Proper Eye Relief Adjustment. Includes Assembly Screws for Simple and Friendly Installation, No Gunsmith Required. UTG Pro Limited lifetime warranty.
Material: HD Aluminum
Pieces: 1 Rail
Type: Picatinny/Weaver
No. of Rails: 1
Length: 4.67 inch
Width: 0.83 inch
Height: 0.35 inch |
$ 14.95/ Each |
|
|
|
|
|
|
| |
Ruger Scope Rings 30mm 1" Inserts Silver
You Get 2 Ruger Style Scope Rings For The Price Of One! This Ruger Ring Style Scope Rings Fits All Ruger Rifles With Ruger Rail And Accepts Both 30 mm And 1" Inch Scope Tubes. Comes With 1" Inserts. Color Is Silver, Material: Metal. Low Profile Saddle height 0.98". Lifetime Warranty.
Will Fit
Mini-14 "Ranch Rifles (Deerfield 44)
( .223 and 7.62 models )
Pc-9 and Pc-40 Carbine
Deerfield 99/44
96/44 Lever action
77/50 Muzzleloader
77/22 Bolt action
No.1 Single shot rifles
Mini-14
Mini-30
Ruger No. 1
Model 96/44
Mounts onto Ruger Rifles with Integral Scope Mounts and Ranch Rifle models.
Note : Verify factory specifications if your Ruger rifle uses a Staggerd ring setup (High & Low) or uses the Same ring height for front & back. |
$ 24.95/ Each |
|
|
|
|
|
|
| |
Ruger® 10/22 Tactical Quad Rail
This aftermarket Ruger® Tactical quad rail with weaver/picatinny rails is compatible with your Ruger 10/22 original factory wooden stock. The tactical quad rail upgrades your Ruger 10/22 rifle with a black hard anodized aircraft grade aluminum quad rail, and the design offers plenty of picatinny rail space to mount tactical accessories to your rifle like laser sights, bipods, vertical grips, red dot sights, and scopes. The T-marked rails allow accessories to be removed and replaced with ease. Length: 15". It accepts all standard Weaver/Picatinny 1913 accessories. This product is only compatible with the original factory wooden stock. It may fit some synthetic stocks with the same dimensions, but we cannot guarantee it. Picatinny rail covers are included. |
$ 34.95/ Each |
|
|
|
|
|
|
| |
3/8 dovetail 1 Inch Scope Rings Medium Profile 1.1"
The 3/8 dovetail 1 inch scope rings are medium profile and mount onto any 3/8" Dovetail rails found on .22 caliber rimfire rifles and airgun. The 3/8 dovetail scope rings have a optic medium profile center height of 1.1" inches. Ring overall height: 1.7". Made from black hard anodized aluminum. Scope Rings fit 1" tube diameter scopes. Scope rings have steel lock down screws at base and come with allen key wrench tool. Rings are sold as a pair.
Specs:
Mounts onto 3/8" Dovetail rails.
Scope Rings fit 1" tube scopes.
Optic Centerline Height: 1.1".
Ring Overall Height: 1.7".
Black Hard Anodized Aluminum.
|
$ 8.99/ Each |
|
|
|
|
|
|
| |
Ruger 10/22 Takedown 3-9X32 Scope & Picatinny Rail Mount Kit
This UTG 3-9X32 bug buster scope kit with Picatinny rail scope mount for the Ruger® 10/22® Takedown and carbine model rifles easily fits in your bag with QD rings and comes complete with 2" sunshade, high quality flip-open lens caps and quick release scope ring mounts are perfect for your rifle. This tactical scope for your Ruger 10/22 is red/green dual illuminated for low light conditions and heavy duty recoil rated completely sealed and nitrogen filled, shockproof, fogproof and rainproof. The scopes has a range estimating Mil-dot Reticle perfect for optimal aiming and shooting performance with emerald coated lens giving you a crystal clear view with maximum light transmission to see your target. The scope also features premium zero lockable and zero resettable target turrets with consistent and precise 1/4 MOA per click adjustment and adjustable objective from 3 Yards to Infinity to achieve parallax-free view. The scopes has a large field of view (Wide Angle) and the most accommodating eye relief for optimum critical CQB target a acquisition. This Picatinny Rail Mount Proudly Designed and Made in USA from precision machined aircraft grade aluminum with matte black hard coat anodized finish. 4.67" overall length with 11 Picatinny rail slots for and flexible positioning of your magnified optics for proper eye relief adjustment. Mount includes assembly screws for fast and east installation with no gunsmith required.
Scope Specs:
Nitrogen Filled
Fog Proof
Shockproof
Rainproof
TS Heavy Duty Recoil Rated
Material: Aircraft-Grade Aluminum Alloy
Windage And Elevation
Dual Sealed O-Rings
Fully Coated Lenses
Magnification: 3 - 9X
Tube Diameter: 1 Inch
Objective Diameter: 32mm
Field of View @ 100 yards: 37.7' - 14'
Eye Relief: 4.2" - 3.2"
Exit Pupil: 10.6mm - 3.6mm
Click Value @100 yards: 1/4"
Length: 206mm
Parallax Setting: 3Yds - Infinity
Batteries: CR1620 3v
Fits Most Ruger® 10/22® Takedown and Carbine Models With Drilled and Tapped Receiver From Factory. |
$ 139.99/ Each |
|
|
|
|
|
|
| |
Leapers .22 Scope Rings Airgun Rifle Rings High Profile
Leapers .22 Scope Rings Airgun Rings. Dovetail Scope Rings For Use On Most .22 Rimfire Rifles and Air Gun Rifles. 1" Tube High Profile. Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish. |
$ 12.99/ Each |
|
|
|
|
|
|
| |
UTG High Profile .22 Airgun Scope Rings 1" Scope Ring With Stop Pin
Leapers RGPM-25H4 UTG High Profile .22 Airgun Scope Rings 1" Scope Ring With Stop Pin. Airgun & .22 Cal. High Profile Rings Heavy Duty Scope Rings 1" diameter, 21mm width, fits scope with objective up to 56mm. 4 Hex screws on top to tightly secure the scope. Saddle height 0.56". Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish. Complete with Stop-pin for Rock Solid Application. Ring Base Designed with Locking Screws to Tightly Fit on Mounts with Airgun/.22 Dovetail Dimensions. Reversible Locking Plate to Fit Full Range of Airgun/.22 Rails. Limited lifetime warranty.
For High Power Airguns And .22 Cal. Rifles, Marlin 60, Ruger 10/22 with dove tail rails. |
$ 15.99/ Each |
|
|
|
|
|
|
| |
Leapers 30mm Rings, High, 3/8" Dovetail
The Leapers UTG RGPM-30H4 30mm rings are high profile and fit 3/8" dovetail rails on airguns and. 22 rimfire rifles. The dovetail 30mm rings have 4 hex screws per ring to secure the scope and a vertical stop pin and locking screw. The rings can be used with any 30mm scope with an objective up to 56mm. The reversible locking plate to fit full range of Airgun and .22 rails. Limited lifetime warranty.
For High Power Airguns And .22 Cal. Rifles, Marlin 60, Ruger 10/22 with dovetail rails. |
$ 15.99/ Each |
|
|
|
|
|
|
| |
Leapers Accushot 1-Pc Mount 1" Rings 3/8" Dovetail Medium Profile Airgun/22
The Leapers UTG accushot 1-pc mount with 1" Medium profile rings and 3/8" Dovetail mount is for .22 rifles and air guns. The UTG Medium Profile Airgun Mount with Stop Pin, 1" Dia. rings fits 3/8" Dovetail scope rails. Ring Base Designed with Locking Hex Screws to Tightly Fit Rail Mounts with Airgun/.22 Dovetail Dimensions. Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish. Fits scope with objective up to 45mm. Integral base provides added security and stability, reducing recoil and increasing performance. Saddle height 0.56". Reversible Locking Plate to Fit Full Range of Airgun/.22 Rails. Limited lifetime warranty. For High Power Airguns And .22 Cal. Rifles, Marlin 60, Ruger 10/22 with dove tail rails. |
$ 17.99/ Each |
|
|
|
|
|
|
| |
UTG® ACCUSHOT® 30mm Medium Profile Airgun/.22 Rifle Dovetail Integral Mount
The Leapers Utg airgun/.22 full integral mid-profile 3/8" dovetail scope mount is for 30mm tube scopes. The UTG 1-pc mount is for airguns and 22 caliber rimfire rifles. This dovetail scope ring mount is heavy duty. 30mm in diameter, 21mm in width, 120mm in base length, suitable for scopes with objectives up to 45mm. The base provides added security and stability, reducing recoil and increasing performance. Each ring has four screws. Saddle height: 0.55". Utg limited lifetime warranty.
For High Power Airguns And .22 Cal. Rifles, Marlin 60, Ruger 10/22 with dove tail rails. |
$ 17.99/ Each |
|
|
|
|
|
|
| |
Red Dot Sight With 4 Different Reticles
The Aim Sports Red Dot Sight with Four Different Reticles has an aircraft-grade aluminum body. This Aim Sports red dot sight with 4 different reticle options is designed to handle heavy recoil. The tactical red dot sight is fog-proof and has a shock-resistant housing with weather-resistant seals for long-lasting performance. The optically coated lens is more scratch-resistant and has a higher light transmission resolution. The reflex sight offers four distinct reticles to choose from, each with an adjustable rheostat for brightness control to meet varied lighting conditions. The reflex sight has a Picatinny or Weaver mounting system built in. The reflex red-dot sight comes with a protective lens cover and limitless eye relief for efficient target acquisition. limited lifetime warranty.
Magnification: 1X;
Objective Aperture: 24 X 34
Click Value @ 100 Yds: 1 Moa
Dot Size: 3 Moa
Length: 3.1"
Limited Lifetime Warranty
We suggest Extra Reflex Sight Batteries Item # CR2032. |
$ 29.99/ Each |
|
|
|
|
|
|
| |
Ruger Style Rings, 30MM 1.98" 1" High Inserts Blue
Ruger Scope Rings You get 2 Ruger style rings For the price of one!!! Ruger style Rings fits ruger rifles with ruger rail and accepts both 30mm and one inch scope comes with inserts. Material: Metal N.W (0Z): 1.90 Height: (Inch): 1.98.
Mounts onto Ruger Rifles with Integral Scope Mounts and Ranch Rifle models. |
$ 24.95/ Each |
|
|
|
|
|
|
| |
Ruger 10/22® The Complete Gun-Guides® for All Models
This Updated 2016 Ruger® 10/22® The Complete Gun-Guide® Disassembly & Reassembly manual book for All Ruger® 10/22 Models Includes Carbine, Rifle, International, Take-down, SR-22 and Charger Models is the only current printed manual that includes information on ALL listed models from 1964-2014. Includes all serial numbers and manufacture dates for all models from 1964-2014. Easy to use Comb binding lies open and flat on your work surface. Card stock cover. Bright white paper. |
$ 15.95/ Each |
|
|
|
|
|
|
| |
UTG 4.2" ITA Red/Green CQB Dot with QD Mount, Riser Adaptor
The Leapers SCP-DS3840W UTG 4.2" ITA Red/Green CQB Dot with QD Mount/Riser Adaptor is an illuminated combat sight. This UTG Red-Green dot sight is the best way to zero in on your target. This sights lightning-quick precision Instant Target Aiming (ITA) with pinpoint accuracy! The high-quality optics in this dual-illuminated red dot and green dot sight help to quickly distinguish between subtle differences in colors and contrasts and catch your eye so that aiming is fast and easy with accuracy. The illumination rheostat with variable brightness levels offers stealthy and infinitely fine adjustment. The tactical sight has 1x magnification, a 32.5 mm diameter, a 4.2" long micro-small windage windage and elevation locking system, and is heavy-duty recoil-rated. Complete with both a high-profile cantilever mount and a low-profile vertical mount with an innovative quick-detach mounting deck that can be used on any Picatinny rail and flip-open lens caps. Limited lifetime warranty.
This tactical sight is great for combat and tactical situations, and even better for hunting. This tactical red dot green dot features multi-coated optics with non-reflection high-tech emerald coatings for increased brightness in low-light conditions, illuminated reticle dots, and an easy-to-use finger-adjustable rheostat-patterned Illumination system with variable brightness levels to offer stealthy and infinitely fine adjustment for greater visibility at sunrise and sunset. The Red/Green Dot Sight is waterproof, shockproof, nitrogen-purged, and fogproof. The scope base mounts are picatinny and weaver-style scope bases. The sight is an optimal height design to co-witness with most iron sights. It includes both the high-profile cantilever mount and the low-profile vertical mount, as well as an innovative quick-detach mounting deck that can be used on any Picatinny rail.
The Illuminated Combat Red Dot Green Dot Sight makes a great addition to any AR15, M4, M16, AK47, Hipoint 995, Hipoint 4095TS, Hipoint 4595TS, Beretta Cx4 Storm, Remington 870 Shotgun, Mossberg 500 590 535, Winchester 1200/1300, Mavrick 88 Ect. SCP-DS3840W
Specs
Field of View @ 100 yards: 100'
Unlimited Eye Relief
Exit Pupil: 26mm
Click Value @100 yards: 1/4"
Parallax Setting: Infinity
Heavy Duty Recoil Rated
4.0MOA Aiming Dot
Shockproof
Fog Proof
Nitrogen Purged
Water Proof
Lightweight
Compact 3.9"
Windage & Elevation Locking
Objective Diameter: 32.5mm
Magnification (X) 1
Power Supply Battery (Included)
Batteries: CR1620 3V
Battery Life (Hours) 50
Mount Standard Picatinny / Weaver Rail
Housing Construction Aluminum
Tube Length 3.9"
Finish Matte Black
Length (In) 4.2" Approximately
Limited Lifetime Warranty
We Suggest Added Accessories UTG 3X Magnifier Max Strength QD Picatinny Mount Item # SCP-MF3WEQS
We Have Russian AK Side Mount With Scope Mount Rail Item # MTU016
We Have AR-15 Carry Handle Mounts Available If You Need One Item # MAR6M2 & AR15/16
( We suggest Extra Batteries Item # CR1620 )
|
$ 69.99/ Each |
|
|
|
|
|
|
| |
UTG Combat Tactical Laser Sight With Windage Elevation Adjustment
The Leapers SCP-LS268 UTG® Combat Tactical Laser Sight with Picatinny Mount features an extra bright red laser beam sight with precision wide range windage and elevation adjustments for all firearms, rifles, pistols and shotguns. The universal UTG combat tactical adjustable red laser sight can be installed on any military standard picatinny or weaver rail. The Universal Slide on Mounting Deck is designed to fit most tactical firearms, with or without rail slots. This red laser sight comes with an ambidextrous push button switch and a remote pressure switch. The red laser sight is hard anodized with a matte black finish for wear resistance. This is a great red laser sight for a wide range of pistols, shotguns, and rifles. It fits on 1.6" long Picatinny or Weaver Rails. It will fit on Taurus PT 24/7, Smith & Wesson M&P45 and more if your rail is 1.6" long, among others. made from high-quality aircraft-grade aluminum construction. UTG Lifetime Limited Warranty.
Item Number SCP-LS268
Output Power 2.5 ~ 3.1mW
Length 65mm (2.559in)
Wavelength 630 ~ 640nM
Main Body Diameter 14mm (0.551in)
Beam Diameter 15 ~ 20mm @15m
Range (Standard) Up to 500 yards at night
Operate Temperature -10°C (14°F) ~45°C (113°F)
Pressure Switch Included
Structure & Adjustment TS & 4 Points Battery 4 x LR44 (AG13)
W/E Adjustment Range 80cm
Shock Proof
Water Resistant
Four AG-13 (LR44) Alkaline Button Cell Batteries
Type CLASS IIIA Laser Beam Life Time 6000 hrs
We Suggest Getting Delux Remote Presure Swich To Go With Your Laser Sight Item # TL-PSLS268
( We suggest Extra Laser Batteries Item # AG13 |
$ 35.99/ Each |
|
|
|
|
|
|
| |
UTG 1" BugBuster 3-9X32 Scope Side AO Mil-dot With Dovetail Rings
The UTG 1" BugBuster 3-9X32 Scope with Side AO, Mil-dot reticle, and DT Dove Tail Ring for 22 rifles and air guns is built on a true strength platform that is heavy recoil rated, completely sealed and nitrogen filled, shock proof, fog proof, and rain proof. The utg BugBuster 3-9X32 Scope features reinforced windage and elevation adjustment components for added zero retention. the 1 inch scope tube with "best in class" Emerald lens coatings to achieve maximum light transmission and clarity. Premium Zero-Lockable and Resettable Target Turrets with the Most Consistent and Precise 1/3 MOA per Click Adjustment Classic and Proven Mil-Dot Range Estimating Reticle Side Wheel Adjustable Turret for Parallax Adjustment from 3 Yards to Infinity Included are a 2" sunshade, high-quality flip-open lens caps, a cleaning cloth, and medium-profile Torx screw locking dovetail rings.
Scope Specs:
Nitrogen Filled
Fog Proof
Shockproof
Rainproof
TS Heavy Duty Recoil Rated
Material: Aircraft-Grade Aluminum Alloy
Integral Windage And Elevation
Dual Sealed O-Rings
Fully Coated Lenses
Magnification: 3 - 9X
Tube Diameter: 1 Inch
Objective Diameter: 32mm
Field of View @ 100 yards: 36.6' - 12.5'
Eye Relief: 4.3" - 3.3"
Exit Pupil: 10.6 - 3.6
Click Value @100 yards: 1/3"
Length: 199mm
Material: Aluminum
Parallax Setting: 3Yds - Infinity
Scope Rings Dove Tail .22/Airgun Included
Flip-open Lens Caps Included
Lifetime Limited Warranty |
$ 107.99/ Each |
|
|
|
|
|
|
| |
UTG 3.8" ITA Red/Green CQB Dot Sight with Integral Mount
The Leapers SCP-RD40RGW-A UTG 3.8" ITA Red/Green CQB Dot Sight with Integral Mount Picatinny Mounting Deck For AR Rifles and 12/20 Gauge Shotguns. Quick Aim Electronic Dot Sight with Red/Green Dual Illumination. 38mm Tube with Best in Class Emerald Lens Coating for Maximum Brightness and Clarity. Consistent and Precise Coin-adjustable W/E Knobs with 1/2 MOA per Click Increments. Clear and Sharp 4.0 MOA Dot. Optimal Brightness Settings for Variable Shooting Environment. Great Field of View and Unlimited Eye Relief . Includes Integral Weaver Mounting Deck and Flip-open Lens Caps. Lifetime Warranty.
Specs:
Nitrogen Filled
Fog Proof
Shockproof
Rainproof
True Strength Heavy Duty Recoil Rated
Material: Aircraft-Grade Aluminum Alloy
Integral Windage And Elevation
Dual Sealed O-Rings
Fully Coated Lenses
Red DOT Green DOT
Red/Green Dual Illumination
Flip-open Lens Caps
Magnification: 1.00X
Tube Diameter: 38mm
Objective Diameter: 30mm
Field of View @ 100 yards: 16.5'
Eye Relief: Flexible
Exit Pupil: 25.0mm
Click Value @100 yards: 1/2"
Length: 95mm
Batteries: CR2032 3V
Lifetime Warranty
Please Check Our Rifle Scope Category we have a full line of Compact and full size scopes for all rifles AR-15, M-16, M4, AK, H&K SKS, and more.
Can be used with Tactical 3X Magnifier Item # SCP-MF3WEQS
We Have AR-15 Carry Handle Mounts Available If You Need One Item # MAR6M2 & AR15/16
We suggest Extra Batteries Item # CR2032 |
$ 38.95/ Each |
|
|
|
|
|
|
| |
UTG 4X32 1" Hunter Scope, Mil-dot, 22/Airgun Rings, Adj@35 Yds
This Leapers SCP-U432FD UTG 4X32 1" Hunter Scope with Mil-dot Reticle and Airgun /.22 Rings Adj@35 Yds is Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof. Airgun / .22 Scope Has Premium Finger Adjustable Target Turrets with the Most Consistent and Precise 1/4 MOA per Click Windage/Elevation Adjustment. Sapphire Coated Lenses to Achieve Maximum Light Transmission for the Best Clarity. Mil-dot Range Estimating Reticle for the Most Optimal Aiming and Shooting Performance. Parallax Pre-adjusted at 35 Yards Comes Complete with Medium Profile .22/Airgun Rings and High Quality Flip-open Lens Caps.
Magnification: 4X
Tube Diameter: 1 Inch
Objective Diameter: 32mm
Field of View @ 100 yards: 32.0'
Eye Relief: 3.4"
Exit Pupil: 8.0mm
Click Value @100 yards: 1/4"
Length: 310mm
Parallax Setting: 35 Yds
Airgun .22 Heavy Recoil Rated |
$ 72.99/ Each |
|
|
|
|
|
|
| |
3-9x42 Illuminated Red Green Rifle Scope Rubber Armored
This tactical rubber armored scope is a 3-9x42 illuminated red-green P4 Sniper retical compact rifle scope, fog proof, nitrogen filled heavy recoil rated. This rubber armored scope comes with Picatinny-Weaver style scope ring mounts. The compact scope body is made from a solid aircraft grade aluminum alloy for durability. This scope features fully multicoated lenses for a bright, clear view that are specifically designed for daytime and low-light shooting conditions. The scope has an LED-illuminated P4 Sniper range finder reticle in green or red when illuminated. It has seven brightness settings to choose from, and the illuminated reticle can be seen day or night. When the tactical scope is powered off, the reticle is normal. This scope will fit a flatop riser or a weaver/picatinny rail system found on AR style rifles or shotguns. The scope also comes with integrated tactical pop-up see-through sniper lens caps and batteries are included. This compact scope is great for carbine rifles like H & K, AK-47, AR-15, M-16, M4, SKS, Hi-Point 995 & 40cal, etc. The scope has a ncstar limited lifetime warranty.
Illuminated Rifle Scope Specs
Fog proof: Yes
Nitrogen Filled: Yes
Heavy Duty Recoil Rated: Yes
Magnification: 3-9X
Objective DIA (MM): 42.00
Tube DIA: 30MM
Field of view @ 100 yards (Feet): 37.7-12.5
Eye Relief (inch): 2.00
Exit Pupil (MM): 14-4.7mm
Click Vaiue 1/2 M.O.A.
Comes with scope rings: Yes
Multi Coated lens: Yes
Lens Coating: Ruby
Reticle: P4 Sniper Rangefinder
N.W. (Oz) 16.5
Length (inches): 7.7
Comes With Built In Pop Up Lens Covers.
2 Weaver/PIcatinny Scope Rings
Scope Body Rubber Armored
Color: Black.
Limited Lifetime Warranty
( We suggest Extra Scope Batteries Item # CR2032 ) |
$ 99.99/ Each |
|
|
|
|
|
|
| |
Ruger Charger Pistol Scope 2-7x32 Long Eye Relief Illuminated Reticle
The perfect scope for the Ruger® 22 Charger™ Rimfire Pistol it is a Long Eye Relief Scope 2-7X32 LED Lit Illuminated Reticle for day and dusk shooting with 7 power settings. This 2 -7X32 AO Pistol Scope comes with Includes one inch aluminum weaver style rings and lens caps. The Long eye relief scope gives you extended mounting capability with multi coated lenses and variable power magnification. Scope has illuminated plex reticle. Ncstar Lifetime Limited Warranty.
Scope Specs: Nitrogen Filled
Fog Proof
Shockproof
Rainproof
Heavy Duty Recoil Rated
Material: Aircraft Aluminum Alloy
Magnification: Zoom 2X-7X
Tube Dia. 1"
Objective Dia. (Mm) 32.00
Fov (Feet At 100 Yards) Approx 15.5-45
Eye Relief (In) Approx 8.7-10.67
Exit Pupil (Mm) 16-46
Reticle: Illuminated Plex Crosshair
7 Power Settings
Length (In) 8.55
Click Value : 1/2 M.O.A
Exterior Finish: Matte Black
Lens Coating: Blue
Mount Included: Weaver Style Rings
Lens Caps
Polishing Lens Cloth
Ncstar Lifetime Limited Warranty |
$ 69.99/ Each |
|
|
|
|
|
|
| |
Scope For Ruger Charger Pistol 2-7x32 Long Eye Relief
This is a great scope for the Ruger® 22 Charger™ Rimfire Pistol Models or any pistol or rifle needing a Long Eye Relief Scope. This Ncstar 2 -7x32 AO Pistol Scope comes with Includes one inch aluminum weaver style rings and lens caps. The Long eye relief scope gives you extended mounting capability with multi coated lenses and variable power magnification. Scope has plex reticle. Ncstar Lifetime Limited Warranty.
Scope Specs: Nitrogen Filled
Fog Proof
Shockproof
Rainproof
Heavy Duty Recoil Rated
Material: Aircraft Aluminum Alloy
Magnification: 2X-7
Tube Dia. 1"
Objective Dia. (Mm) 32.00
Fov (Feet At 100 Yards)
14-4.5 Eye Relief (In) 8.7-10.67
Exit Pupil(Mm) 16-46
Reticle: Plex
Length (In) 11.07
Click Value : 1/4 M.O.A
Exterior Finish: Matte Black
Lens Coating: Blue
Mount Included: Weaver Style Rings
Lens Caps
Polishing Lens Cloth
Ncstar Lifetime Limited Warranty |
$ 59.99/ Each |
|
|
|
|
|
|
| |
Bubble Level For Standard Weaver Base Rail 7/8"
The scope bubble level attaches to standard Weaver/Picatinny rail base 7/8". This scope bubble level helps you ensure that your rifle and scope are perfectly aligned. This optics bubble level Improves your accuracy by ensuring the rifle is level before each shot. It is machined from aluminum with a White line on housing for quick reference. Bubble Level Fits 7/8" Dovetail Weaver Base Rail. Add this bubble level to your gunsmithing tools and scope accessories. This bubble level is a simple way to make sure your scope is level at the range for longer range shooting. The body is made of machined black anodized aluminum.
Note: Fits Weaver-Style Base Rails 7/8". You May Want To Buy One For Each Rifle & Shotgun You Have. |
$ 15.95/ Each |
|
|
|
|
|
|
| |
UTG Shooter's SWAT Bipod, Rubber Feet, Height 6.2"-6.7"
The Leapers TL-BP28S UTG shooter's SWAT combat profile bi-pod is a foldable tactical low profile bi-pod. This UTG bi-pod is high quality and durable aluminum construction lightweight strong and built to last. The bi-pod has adjustable leg length and provides range from 6.2 to 6.7 inches high. It features a dual mounting system and comes with Picatinny mounting deck and a swivel stud mount. The rubberized comfort stand and unique posi-lock feature prevent it from tipping. One year warranty.
Bipod Specs
Panning:Yes
Posi-lock: Yes
Extendable Legs: Yes
Foldable Arms: Yes
Swivel Stud Mount:Yes
Picatinny Mount: Yes
Reversible Arms-Folding Yes
Stand: Rubberized
Center Height (Min-Max): 6.2"-6.7"
Leg Length (Min-Max): 6.7"-7.5" |
$ 35.95/ Each |
|
|
|
|
|
|
| |
UTG Tactical OP Bipod 8.3"-12.7" Fully Adjustable UTG Bipod
The leapers TL-BP88 UTG Tactical OP Bipod is a handy accuracy-enhancing accessory for your rifle. The UTG Tactical OP Bi-pod comes with a Dual Mounting Deck Picatinny/Weaver and Swivel Stud. Bipod Has quick folding legs with strong recoil springs. Bipod has fully adjustable legs with posi-lock wheel & quick retraction button. Bipod has Panning Capability to slightly turn the clamp mount horizontally along a vertical axis to offer a wider range of aiming angles without moving the stands. Comes with Bipod Mounting adaptor to mount the bipod to a swivel stud. Mounting deck also designed to mount on a Picatinny rail. Color is Black. This Bipod is ideal for Military, Tactical weapons, Target shooting and Hunting. Center Height: 8.1"-12.7", Leg Length: 7.9"-12.7". One year limited warranty
Tactical Bipod specs:
Panning
Folding Legs
Extendable Legs
Quick Retraction Button
Swivel Stud Mount
Picatinny/Weaver Mount
Rubberized Feet
Center Hight Min 8.1"
Center Hight Max 12.7"
Leg Length Min 7.9"
Leg Length Max 12.7"
Material Aluminum & Steel
Color Black
One year limited warranty |
$ 48.95/ Each |
|
|
|
|
|
|
| |
UTG QD Sling Swivel Adaptor Mount Picatinny 45 Angled offset
The Leapers TL-SWPM01 UTG QD sling swivel adaptor mount picatinny 45-angled offset sling swivel mount is precision machined from aircraft grade aluminum with a hard anodized matte black finish. This rugged sling swivel mounting base with max strength torx drive locking screw for picatinny rail is extremely compact, lightweight, and low profile. The utg qd sling swivel adaptor mount accepts any quick detach sling swivel with a 0.37-inch diameter swivel stud. This mount is reversible for right-or left-handed sling use. The qd swivel housing is designed with quarter-turn rotational overtravel stops to better control sling position and movement. It includes a t-20 torx allen wrench for simple and friendly installation, no gunsmith required. Material: aluminum height: 0.38 "Length : 1" color: black. Utg one year limited warranty.
Compatible With UTG Sling Swivels Below.
TL-QDSW08A UTG Standard Push Button QD Sling Swivel, 1" Loop
TL-QDSW08B UTG Standard Duty Push Button QD Sling Swivel, 1.25" Loop
TL-QDSW08C UTG Push Button QD Sling Swivel, 1.25" C-Shape Loop
TL-QDSW18 UTG Heavy Duty Push Button QD Sling Swivel, 1.25" Loop |
$ 12.49/ Each |
|
|
|
|
|
|
| |
Cheek Rest Riser For Rifle or Shotgun
This Universal Cheek Rest Riser for your rifle or shotgun stock is a super easy upgrade to any gun. The Universal Cheek Rest Riser installs on most wood rifle stocks and synthetic aftermarket shotgun stocks with mounting space, like the tactical speed feed stock. The cheek rest riser raises your eye level for improved accuracy and comfort when target shooting and hunting. It allows the user to have a proper cheek weld when looking through the scope. Fast installation. You simply drill the stock and mount the cheek rest where you want it, and you're done. Mounting hardware is included. Approximate dimensions are 4.95" long, 1.40" wide, and 3/4" high. The color is matte black, and it is made in the United States of weather-resistant DuPont® extreme reinforced polymer. Limited lifetime warranty.
Note: Fits Most Original Wood and Synthetic Stocks With Mounting Space. Note: Velcro strip may be used as an alternative to drilling stock. Velcro not included. |
$ 9.99/ Each |
|
|
|
|
|
|
| |
3/8 dovetail 1 Inch Scope Rings High Profile 1.3"
The 3/8 dovetail 1 inch scope rings are high profile and mount onto any 3/8" Dovetail rails found on .22 caliber rimfire rifles and airgun. The 3/8 dovetail scope rings have a optic center height of 1.3" inches. Ring overall height: 2.2". Made from black hard anodized aluminum. Scope Rings fit 1" tube diameter scopes. Scope rings have steel hexagon shape mounting nut, with holes for torquing with allen key wrench.
Specs:
Mounts onto 3/8" Dovetail rails.
Scope Rings fit 1" tube scopes.
Optic Centerline Height: 1.3".
Ring Overall Height: 2.2".
Black Hard Anodized Aluminum. |
$ 13.99/ Each |
|
|
|
|
Special Deals!... Buy One and get any 2nd listed Item at 5% Off
