Combathunting.com

Combathunting.com: Item#

pic Shopping
All Categories
Special Deals!... Buy One and get any 2nd listed Item at 5% Off

  Item Price Image Action
-
  Tactical Shotgun Forend Destroyer Gray
ATI Destroyer Gray Tactical Shotgun Forend with Picatinny Rails Fits Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300/SXP Shotguns. This Universal Tactical Shotgun Forend for mossberg shotguns has 2 Rail Locations at 90° Increments Around Forend. Comes With Tactical Shotgun Picatinny Rail Package. One Left 2" Picatinny Rail, One Right 2" Picatinny Rail. Rails Allow for Easy Installation of all Your Favorite Accessories. 2 Blank Inserts for When Rails are Not in Use. Textured Forend Very Tough, yet Extremely Lightweight. Made From DuPont Extreme Temperature Glass Reinforced Polymer. Manufactured in the USA ATI Limited Lifetime Warranty.

Note Mossberg / Maverick 88 forends require a 6 3/4" slide action tube in order to Fit check your shotgun before you order.

Note *The forend included in this package is compatible with most Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.  Warning!!! - Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty.

Fits: Most 12 GA Mossberg 500/535/590/835, Maverick 88, Remington 870, and Winchester 1200/1300/SXP Shotguns. Does Not Fit: Remington 870DM & Mossberg 590M.
$ 29.99/ Each Click to view this Product
-
-
  ATI Gunstock Sling Swivel 1 1/4" Wide High Quality Steel
The ATI Sling Swivel is 1-1/4" Wide and Fits All Standard Sling Swivel Stud and holes found in most rifle and shotgun wood and synthetic stocks. The gun sling swivel hardware is virtually indestructible, made from high quality E-coated Steel and Manufactured in the USA. Qty. 1. Limited Lifetime Warranty.

Qty. 1
Easy Installation
High Quality E-Coated Steel
Accepts up to 1 1/4" Wide Slings
Virtually Indestructible
Manufactured in the USA
Limited Lifetime Warranty
 
Fits Standard Size Sling Swivel Studs.
$ 6.99/ Each Click to view this Product
-
-
  ATI X1 TactLite Scorpion Razorback Recoil Pad Upgrade Kit
ATI gunstocks scorpion razorback X1 Recoil Reducing Butt-Pad for ATI's Tactlite stocks is 1" Thick Butt-Pad for recoil absorption of heavy loads. The razorback recoil pad allows recoil impact to be absorbed with no pain being transferred to the shooter and remains flexible in extreme temperatures. ATI Limited Lifetime Warranty. Made in the USA.

Standard Thickness
Mounting plate included
ATI Manufactured in the USA
Limited lifetime warranty
Fits: ATI's Tactlite Stocks Only.

Also available in X2 Thickness Razorback Recoil Pad Item # A.5.10.2530.
$ 15.99/ Each Click to view this Product
-
-
  Tactical Shotgun Sling with Shellholder
This SWAT black universal tactical combat shotgun sling shell holder bandolier holds 15 extra 12 gauge rounds and attaches to standard sling swivels with durable steel spring hooks. Fully adjustable combat-hunting shotgun sling in black. This shotgun sling is constructed of high-quality elastic and 2 inches of nylon webbing. The non-slip backing keeps the sling in place. The Bandolier sling's maximum length is 51". It fits most shotguns with standard sling swivel loops, or you can put a small key ring through your sling stud. The snap cooks will not attach directly to the studs.
$ 19.99/ Each Click to view this Product
-
-
  Shotgun Sling 15 Round Shot Shell Bandolier Two Point Sling FDE/TAN
This FDE/TAN tactical shotgun combat sling holds 15 rounds of your favorite shotgun ammo. The shot shell bandolier two-point sling comes in tan-flat-dark earth. The bandolier sling holds 15 2 ¾" or 3" shotgun shells and comes with 2 sling swivels. This Tactical Shotgun Sling with a shell bandolier has a padded cover to secure shotgun shells in place. The padded sling cover attaches to the sling via hook and loop fasteners. The barrel end of the sling has an elastic band section to absorb the shock when walking with the shotgun shouldered. There is also a padded shoulder pad covering the shoulder area of the sling to make it more comfortable when shouldered. The shoulder pad has 1" of web material sewn on to provide attachment points for attaching a pocket knife, multi-tool, or flashlight. It includes a pair of 1" Sling Swivels to attach to the sling studs on your shotgun, or the sling can attach directly to the sling loops on your shotgun. Length: adjustable from 33.0" to 55.0".
$ 36.99/ Each Click to view this Product
-
-
  Tactical Green Laser Sight With Weaver & Base Pressure Switch
This Military style universal green laser sight for your rifle or shotgun features a one-inch Weaver-Picatinny laser mount and a tactical laser remote pressure switch with a momentary end cap switch. The purpose of this tactical green laser sight is to deliver fast target acquisition anytime day or night. This green laser sight is suitable for any rifle, shotgun, or AR pistol. It is quick and easy to operate and mount. This tactical laser sight It is great for military use, police, and SWAT. It is suitable for all environments, from the forest to the desert. It has O-ring seals for weatherproofing. It includes a pressure pad switch and a push momentary switch button, as well as an allen wrench for mounting and a 3 volt lithium battery.The range is up to 1-mile at night, and the range is with optimum weather conditions. The green laser beam is superior to red lasers. It is even visible in broad daylight, 20 times brighter than red laser gun sights. This laser is easily adjusted with standard X-Y windage and elevation adjustments. This laser attaches to the Weaver-Picatinny rails system and scope mounts found on many tactical rifles. The laser sight has an aircraft grade aluminum construction with a black hard anodized finish. manufactures a one year warranty.

Universal Green Laser Sight System Specifications

Weight. 5.2 Ounces With Batteries
Length. 3.95" X 1.0"
Power Output.<5Mw Continuous (Class Iiia)
Module (Standard) 532 Nm Green Laser Diode
Range Up To 1-Mile At Night With Optimum Conditions
Range (Up To 200 Yards Day Time)
Batteries(1) Cr123A 3Volt Lithium Battery
Battery Life. Over 3.00 Hours Continuous
Beam Size Approx. 1.75" @ 100 Yards
Adjustment .5 Feet Adjustment Movement 
Windage And Elevation
Color: Black
Material: T6 Aluminum
Water-Resistant O-Ring Sealed For Weatherproofing.
Comes With Coiled Remote Tactical Laser Switch.
Comes With Battery
Manufactures one year warranty.

( We suggest Extra CR123A 3Volt Lithium Batteries For Flashlight Item # 123A Batteries )
$ 59.99/ Each Click to view this Product
-
-
  Tactical Red Dot Reflex Sight With 4 Reticle
This is the greatest affordable reflex sight for the AR-15 and other tactical rifles, and it also works well on shotguns. This tactical reflex sight features 1X magnification and four reticle configurations in red and green dot with five brightness levels for any condition, day or night. This is one of the best red dot reflex holographic sights on the market for the money. It has full windage and elevation adjustment, as well as quick and easy target acquisition for tactical operations, making it a perfect sight for any AR platform or shotgun. The on/off and color switches are controlled by digital push buttons on sight. To change colors, hold for 3 seconds, and to turn off the sight, hold for 5 seconds. The reflex sight is made of aircraft-grade aluminum alloy and finished in a black hard anodized finish. For flexible attachment on AR rifles and shotguns, there is no limit to the eye relief. Batteries are included with the package. Reticles are available in Dot, Bullseye, Cross, and Starburst LED (Light Emitting Diode) patterns that are completely safe for the eyes. Quick installation and removal thanks to the QD integral weaver/picatinny mounting deck.

Specs:
Heavy Recoil Rated
Material: Aircraft-Grade Aluminum
Integral Windage And Elevation
Red/Green Dual Illumination
4 Reticle Options
Magnification: 1X
Objective: 22mm
Lens Coating: platinum
Eye Relief: Unlimited
Exit Pupil: Unlimited
Parallax Setting: 100 Yds
Batteries: LR41 Included
Weaver/Picatinny Mount
Dimensions:L-3.6" W-2.4" H-2.2"
Battery Type: LR41/AG3 (3) included

We suggest extra batteries to go with your refex sight AG3.
$ 59.99/ Each Click to view this Product
-
-
  Buttstock Shotshell Holder 12/20 Gauge Black
Black Tactical Buttstock Shell Holder for 12 and 20 gauge shotguns. Elastic buttstock shot shell holder is designed to fit most standard shotgun buttstocks. Holds 5 extra rounds of 2-1/4" or 3" shells. Shells are secured by elastic. Length 6.0 inches.
$ 6.99/ Each Click to view this Product
-
-
  Mossberg 500,505,535,590,835 Maverick 88 & 91 Pump Action Shotgun Gun Guides®
This Gun Guides® Mossberg® 500,505,535,590,835 Maverick 88 and 91 Pump Action Shotgun Complete disassembly, cleaning, lubrication, and reassembly manual/book for is for ALL models. The Gun Guides Mossberg® shotgun manual has 4 Exploded parts diagrams of ALL parts. Perfect for light reading or intensive step-by-step instruction. The Easy to use Comb binding lies open and flat on your work surface 24 pages and 38 + high-resolution gray scale images to get the job done and maintain all your Mossberg shotguns.
$ 9.99/ Each Click to view this Product
-
-
  Mossberg Maverick 88 Pistol Grip Forend
This Mossberg Maverick 88 pistol grip forend upgrade is a slim ergonomic design for your tactical shotgun. The textured forend pistol grip gives you increased control comfort and accuracy. Forend fits 12 ga Mossberg 500,535,590,835 and Maverick 88 shotguns, Remington 870 and Winchester 1200/1300/SXP Shotguns. Adapters for all supported models are included. Grip is made from DuPont® Extreme temperature glass reinforced polymer. ATI Limited Lifetime Warranty. Made in the USA.

Fits Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300 Defender SPX Shotguns.

Note: Mossberg Maverick 88 forends require a 6 3/4" slide action tube some minor modification may be required the forend. Forend is compatible with Mossberg shotguns with a removable forend from action tube, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.
$ 19.65/ Each Click to view this Product
-
-
  UTG Universal Single-rail Shotgun Barrel Mount, 3 Slots
The Leapers UTG universal single rail shotgun barrel mount with 3 slots is compatible with barrels and magazine tube diameter between 75"-1.1" inches around. The universal barrel mount picatinny rail for shotguns is solid aluminum construction with matte black finish. The shotgun barrel mount picatinny rail is easy to install with its two piece design for clamping directly to your shotgun barrels, magazine tube extension and lets you mount laser sights, tactical flashlights or bipod. Fits most shotguns barrels and magazine tubes perfect for Remington 870 1100 11-87 SP-10 Mossberg 500 835 Maverick 88 Winchetser 1300/1200 and many more. Compatible with firearm barrel range diameter .75"-1.1" inches around.
$ 9.95/ Each Click to view this Product
-
-
  Maverick 88 Shotgun Forend Removal Tool
This aftermarket Maverick 88 Shotgun Forend Nut Removal Tool Is Compatible With Most Pump Action Shotguns with removable forends. Includes: Two 4Mm Thick Interchangeable Acrylic Shields. This Shotgun Forend Removal Tool Is All Steel Construction With Black Oxide Finish. Easily remove the forend from most Mossberg 500/590, Maverick 88, Remington 870 and Winchester Defender (1200/1300) shotguns and clones 12Ga only.
$ 14.49/ Each Click to view this Product
-
-
  Deluxe Shotgun Heatshield With Ghost-Ring Sights
The deluxe shotgun heatshield with ghost ring sights for Mossberg Maverick 88 shotguns and most other shotgun models lets you install combat sights on your shotgun barrel. This universal shotgun heat shield with ghost ring sights, it fits all 12, 16, 20, and.410 gauge shotgun barrels. The AR-15 style fixed nylon ghost ring sights further enhance the high quality blued steel heatshield, which has elongated cooling slots. Simply slide the heatshield with ghost ring sights over the barrel and secure it with the provided hardware. ATI Lifetime Limited Warranty.

ATI Shotforce Deluxe Shotgun Heat Shield With Cooling Slots & Ghost Ring Sight fits Most 12, 16, 20, and .410 Bore shotguns. Note: This will only fit your shotgun if the barrel lug is more than 13.5" from the receiver measure it before you buy. Does Not Fit: Any Vented Rib Barrel Models. Note Each Heatsheild should be custom fit. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm please enlist the services of your local gunsmith.
$ 27.95/ Each Click to view this Product
-
-
  UTG 3.8" ITA Red/Green CQB Dot Sight with Integral Mount
The Leapers SCP-RD40RGW-A UTG 3.8" ITA Red/Green CQB Dot Sight with Integral Mount Picatinny Mounting Deck For AR Rifles and 12/20 Gauge Shotguns. Quick Aim Electronic Dot Sight with Red/Green Dual Illumination. 38mm Tube with Best in Class Emerald Lens Coating for Maximum Brightness and Clarity. Consistent and Precise Coin-adjustable W/E Knobs with 1/2 MOA per Click Increments. Clear and Sharp 4.0 MOA Dot. Optimal Brightness Settings for Variable Shooting Environment. Great Field of View and Unlimited Eye Relief . Includes Integral Weaver Mounting Deck and Flip-open Lens Caps. Lifetime Warranty.

Specs:
Nitrogen Filled
Fog Proof
Shockproof
Rainproof
True Strength Heavy Duty Recoil Rated
Material: Aircraft-Grade Aluminum Alloy
Integral Windage And Elevation
Dual Sealed O-Rings
Fully Coated Lenses
Red DOT Green DOT
Red/Green Dual Illumination
Flip-open Lens Caps
Magnification: 1.00X
Tube Diameter: 38mm
Objective Diameter: 30mm
Field of View @ 100 yards: 16.5'
Eye Relief: Flexible
Exit Pupil: 25.0mm
Click Value @100 yards: 1/2"
Length: 95mm
Batteries: CR2032 3V
Lifetime Warranty

Please Check Our Rifle Scope Category we have a full line of Compact and full size scopes for all rifles AR-15, M-16, M4, AK, H&K SKS, and more.

Can be used with Tactical 3X Magnifier Item # SCP-MF3WEQS

We Have AR-15 Carry Handle Mounts Available If You Need One Item # MAR6M2 & AR15/16

We suggest Extra Batteries Item # CR2032
$ 38.95/ Each Click to view this Product
-
-
  UTG 4" Compact ITA Red/Green Single Dot Scope QD
The Leapers UTG 3.8" ITA Red/Green Single Dot Sight With Integral QD Mount IS The Perfect Accessory For Rifles and 12/20 Guage Shotguns. This UTG 4" Compact ITA Red/Green Target Single Dot Sight with Integral QD Picatinny Mount Tactical Illuminated Red & Green Dot Sight lets you zero in on any target with quick precision and pinpoint accuracy! Crisp and Vivid 4 MOA Target Red/Green Dot with 5 Brightness Settings for Diverse Environmental Background. Instant Aiming and Locking on Target with Great Field of View and Unlimited Eye Relief. Non-Reflection High Tech Emerald Coatings On Lens. Optimal Height Design to Co-witness with Iron Sights on AR Models. Includes Integral Quick Detach Mounting Deck and Flip-open Lens Caps. This Dot sight it is versatile and ideal for most weapon types Pistols, Shotguns & AR Rifles.

This makes a great addition to any Smith & Wesson M&P15-22 Rifle, AR15, M4, M16, AK47, Hipoint 995, Hipoint 4095TS, Hipoint 4595TS, Beretta Cx4 Storm, Remington 870 Shotgun, Mossberg 500 590 535, Winchester 1200/1300, Mavrick 88 Ect. Limited Lifetime Warranty.UTG 4" Compact ITA Red/Green Target Dot Sight with Integral QD Picatinny Mount

Specs
Rugged, Durable Construction
Recoil Shockproof
Lightweight
Compact
Magnification: 1X
Tube Diameter: 38mm
Objective Diameter: 30mm
Field of View @ 100 yards: 16.5'
Eye Relief:Flexible
Exit Pupil: 25.0mm
Click Value @100 yards: 1/2"
Reticle Illuminated Red Single Dot  & Green Dot
Reticle Size (Diameter, Moa 4) Target Dot
Click Value: 1 Moa
Lenss Optical Emerald Coatings
Includes Filp Up Lens Covers
Includes Integral Quick Detach Mounting Deck
Power Battery Type: CR2032 3V
Battery (Included)
Battery Life (Hours) 50
Switch (# Of Positions) 5 Red 5 Green
Mount Picatinny / Weaver
Housing Construction Aluminum
Finish Matte Black
Length (In) 95mm Approximately
Limited Lifetime Warranty

Can be used with Tactical 3X Magnifier Item # SCP-MF3WEQS

We Have AR-15 Carry Handle Mounts Available If You Need One Item # MAR6M2 & AR15/16

We suggest Extra Batteries Item # CR2032
$ 44.99/ Each Click to view this Product
-
-
  Shotgun Universal Cantilever Scope Mount Fits Vent Rib Shotgun Barrels
The Universal Shotgun Vent Rib Barrel Scope Mount fits most shotgun barrels with a vent rib up to 3/8" in diameter. This cantilever shotgun vent rib weaver/picatinny mount works with Remington, Mossberg, Winchester, Benelli, and many more 12/20 gauge shotguns. This vent rib barrel scope mount features a Weaver-Picatinny style rail mount, perfect for adding a scope or red dot sights to your vent rib shotgun barrel. This universal cantilever shotgun vent rib scope mount attaches to the vent rib on your shotgun barrel and provides an extra long weaver/picatinny style scope mount rail over the shotgun receiver, and it is perfectly contoured to the receiver. The length is 11.313" (height 0.2").

This Universal Cantilever Shotgun Scope Mount is perfect for quick barrel changes. The scope is attached to the barrel, not the shotgun's receiver. This rugged mount bolts onto rib shotgun barrels in minutes with no modifications to the shotgun gun. It allows you to change barrels on your shotgun without losing the zero on your sighting system. It's good for left-handed and right-handed shooters. It works with Weaver/Picatinny style rings. There is mounting hardware included. No gunsmith is required. made from aircraft-grade aluminum. Color: Black.
$ 49.99/ Each Click to view this Product
-
-
  UTG Shooter's SWAT Bipod, Rubber Feet, Height 6.2"-6.7"
The Leapers TL-BP28S UTG shooter's SWAT combat profile bi-pod is a foldable tactical low profile bi-pod. This UTG bi-pod is high quality and durable aluminum construction lightweight strong and built to last. The bi-pod has adjustable leg length and provides range from 6.2 to 6.7 inches high. It features a dual mounting system and comes with Picatinny mounting deck and a swivel stud mount. The rubberized comfort stand and unique posi-lock feature prevent it from tipping. One year warranty.

Bipod Specs
Panning:Yes
Posi-lock: Yes
Extendable Legs: Yes
Foldable Arms: Yes
Swivel Stud Mount:Yes
Picatinny Mount: Yes
Reversible Arms-Folding Yes
Stand: Rubberized
Center Height (Min-Max): 6.2"-6.7"
Leg Length (Min-Max): 6.7"-7.5"
$ 35.95/ Each Click to view this Product
-
-
  UTG Deluxe Universal Shotgun Forend Wrench
Leapers TL-SHWR01 UTG Deluxe Universal Shotgun Forend Wrench. Works with most Remington 870 Shotguns, Mossberg 500A Shotgun, Mossberg 500c Shotgun, Mossberg 835, Mossberg 590A1, FNH USA SLP shotgun, Browning BPS Shotgun, Ithaca 37 Shotgun made since 1981, Winchester 1200/1300 Shotgun and other popular Shotgun models. This is a great tool for any gunsmith or shotgun owner. Made from high quality steel with nickle plating.
$ 9.95/ Each Click to view this Product
-
-
  Mossberg Shotgun Tactical Forend
Mossberg 500/535/590/835 Shotgun Tactical Shotgun Forend With 2 Rail Locations at 90° Increments Around Forend. Tactical Shotgun Picatinny Rail Package. One Left 2" Picatinny Rail, One Right 2" Picatinny Rail. Rails Allow for Easy Installation of all Your Favorite Accessories. 2 Blank Inserts for When Rails are Not in Use. Textured Forend Very Tough, yet Extremely Lightweight. Made From DuPont Extreme Temperature Glass Reinforced Polymer. Manufactured in the USA ATI Limited Lifetime Warranty.

Fits: Most 12 GA Mossberg 500/535/590/835, Maverick 88, Remington 870, and Winchester 1200/1300/SXP Shotguns.

Does Not Fit: Remington 870DM & Mossberg 590M.

Note Mossberg / Maverick 88 forends require a 6 3/4" slide action tube in order to Fit check your shotgun before you order.

Note *The forend included in this package is compatible with most Mossberg Shotguns with a (removable forend) any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.

Warning!!! - Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty.
$ 29.99/ Each Click to view this Product
-
-