Combathunting.com

Combathunting.com: Item#

pic Shopping
All Categories
Special Deals!... Buy One and get any 2nd listed Item at 5% Off

  Item Price Image Action
-
  Mauser 98 K98 K-98 / Turkish VZ 24 Rifle Scope & Mount Kit
Put a scope on your Mauser 98 K98 K-98/Turkish VZ 24 Rifle with this 2-7x32 Long Eye Relief Scope and Mount Kit. Comes with Mauser 98 Scope mount and 2-7x32mm precision scout scope with no drill scope mount and scope rings and Lens Caps. The Mauser Kar98 Scope Mount fits on K98 front Iron sight leaf foward of the bolt so you do not have to change the bolt handle. This Mauser 98 Sniper Rifle Scope kit is a great deal turn your old Mauser rifle into a long range sniper hunting rifle great for hunting. You get a complete Scout kit Mauser Karabiner 98k Rifle Kit with scope with plex crosshair reticle with & Scope mount, Scope rings, lens polishing cloth and lens caps. Fits K98 Mauser, vz. 24 rifle & Swiss Models.

This scope mount is very easy to install First you punch out rear sight leaf pin and then remove rear sight leaf & spring then Put scope mount between sight ears and tighten the side screws evenly turn for turn each side. Then Loosen one top screw and tighten the other to adjust the mount elevation until it levels with your rifle barrel that's it your done.

K98 Mauser Scout Sniper Rifle Scope Specs:
Magnification: Zoom 2X-7
Illuminated Reticle
Objective Dia. Mm: 32Mm
Finish: Black
Tube Dia: 1"
Field Of View @ 100 Yrs (Feet) : 14-4.6
Lens Coating: Blue
Length Inches: 11.00"
Wt. Ounce: 9.00 Oz.
Long Eye Relief Inches: 8.7 - 10.67
Reticle: Non Illuminated Plex 
Scope Ring Mount: Yes 
K98 Scope Mount Included : Yes
Lens Caps : Yes
Polishing Lens Cloth : Yes
Comes With A Lifetime Limited Warranty
$ 49.99/ Each Click to view this Product
-
-
  K98 Mauser No Drill Scope Mount
This K98 Mauser no drill Mauser scout scope mount fits on front iron sight leaf forward of the Mauser 98 bolt so you do not have to change the bolt handle. The long eye relief scout scope mount fits German K98 Mauser, VZ 24 rifle, Yugo 48/48A Turned Bolt, Yugo 24/47 Straight Bolt, Turkish 1903/1937/1938/1946 & Swiss Models. This Mauser Sniper Scout mount is a great to turn your old Mauser rifle into a long range sniper hunting rifle great for hunting. Limited Lifetime Warranty.

This 98K Mauser Scout Military Sniper Scope Mount is very easy to install First you punch out rear sight leaf pin and then remove rear sight leaf & spring then Put scope mount between sight ears and tighten the side screws evenly turn for turn each side. Then Loosen one top screw and tighten the other to adjust the mount elevation until it levels with your rifle barrel that's it your done.

Mount Has Locking Bolt Configuration and level adjustments.

$ 14.99/ Each Click to view this Product
-
-
  ATI Mauser 98 Stock Sure-Grip Forend Pads
The ATI Mauser 98 rifle stock sure grip forend pads, are soft touch pads provides you with extra comfort when griping the front forend. This ATI Mauser 98 Soft Touch forend pad has 3M industrial grade self-adhesive for a sure fit and it is easy to install. Fits all ATI Mauser 98 Rifle Stock forends 2 pads for each side color is black. Manufactured in the USA.
$ 8.99/ Each Click to view this Product
-
-
  ATI Mauser 98 Stock Soft Touch Cheekrest Pad
This ATI Mauser 98 rifle stock soft touch cheekrest pad provides you with extra comfort when shooting. This Soft Touch Cheek rest Pad has 3M industrial grade self-adhesive for a sure fit and it is easy to install. Fits all ATI Mauser 98 Rifle Stocks pad color is black.
$ 9.95/ Each Click to view this Product
-
-
  NcStar Precision Grade Bipod Fullsize 3 Adapters 7 to 11 inches
This NcStar precision grade Rifle Bipod is fullsize and comes with 3 bipod adapters. The Sniper rifle bipod features friction nob locking legs, with (1) AR-15 Hand Guard Sling Stud Bipod Adaptor, (1) Universal Barrel Mount Bipod Adaptor fits barrel diameters up to 3/4" and (1) Picatinny / Weaver Style Rail Sling Stud Bipod Adaptor. This Tactical Bipods attach to virtually any Sling Swivel Studded Firearm in Seconds. Made From Aircraft Grade Aluminum and Steel Construction make these bipods Extremely Durable yet very Light Weight. The Bipods Spring Loaded Folding Action give the bipod legs maximum tension in any position. The Spring Loaded legs also Retract instantly with a push of a button. This Full Size Model Bipod has a Adjustable Height of 7 to 11 inches. This Bipod is ideal for Military, Tactical weapons, Target shooting and Hunting. Great For AR-15, M16, M4, M14 Ruger Mini14/30 & Ruger1022. One Year Limited Warranty.

Tactical Precision Grade Bipod Specs:
Folding Legs
Extendable Legs
Friction Nob Locking
Claw Arms
Quick Retraction Button
Swivel Stud Mount
Picatinny/Weaver Mount
Rubberized Feet
Adjustable Height of 7 to 11 inches
Material Aircraft Grade Aluminum & Steel
AR-15 Hand Guard Sling Stud Adaptor
Universal Barrel Mount Adaptor
Picatinny / Weaver Style Rail Sling Stud Adaptor
Color Black
Ncstar One Year Limited Warranty
$ 34.95/ Each Click to view this Product
-
-
  Bipod With Quick Release Weaver/Picatinny Mount
This Picatinny rail bipod is quick release with and spring loaded notched legs. Tactical Bipod mounts onto most Weaver/Picatinny type rails found tactical and hunting rifles. Bipod head has a ball swivel joint for making small aiming adjustments without picking up the bipod off the ground. Aircraft grade all aluminum construction. Spring Loaded Latch Lever on the front of each leg for extending or collapsing the legs. Bipod legs can be folded together and moved into a horizontal rest position. Rubber Pod Feet for Stability. Height: 8.25" Collapsed Height: 11.0 Fully Extended. Limited lifetime warranty.
$ 27.95/ Each Click to view this Product
-
-
  Universal Rifle Laser Sight System
Universal Rifle Laser Sight Accessory For Hi-Point Carbines goes 500 yards this universal rifle mount is heavy duty aluminum, laser has on and off switch operation. Easy Mounting in less then a minute conects to the barrel of any rifle. Comes with 3 lithium batteries 2 1/4" long, weighs 4 ozs. Universal Rifle Laser Sight can be mounted to just about all rifle barrels. Please check your State, County and City laws for restrictions before ordering Lasers.

Red Laser Rifle Sight Universal
Max Range 500 yds
Includes (3) AG13 Lithium Batteries
Standard on/off cap switch
Output Power: <5mW
635-655nm Red Laser Beam
Comes with Universal Laser Mount
Adjustment Tool
One Year Limited Warranty

We Sell a remote tactical Laser Switch Item # ALWSNCS for this laser it replaces the rear swith.

This is perfect for remote on and off control of your tactical laser it can be mounted any on your gun, a highly recommended laser accessory you will love it Item # ALWSNCS

( We suggest Extra Laser Batteries Item # AG13 )
$ 29.99/ Each Click to view this Product
-
-
  Digital Camo Tactical Rifle Gun Case 45"

NcStar Digital Camo Tactical Rifle/Gun Case with Extra mag pouch pockets. Gun Case is constructed of tough pvc material lined with high density foam inner padding for superior gun protection. This tactical Gun case features heavy duty double zippers and padded carry handle, adjustable shoulder sling and owner ID Window. The covered exterior pockets can store extra magazines, vertical grips, tactical flashlights, laser sights or any other kind of weapon accessories you want to take along. Gun case measurements provided are the outside overall length & height of the gun case. We have a full range of gun case sizes to fit almost any rifle or shotgun. This case is  45" L x 13" H. Color Is Digital Camo. Gun case has Limited one year warranty.

We Recommend A Gun Case That Is At Least +2" Longer Than The Firearm'S Overall Length, For A Proper Fit. 

NcStar Tactical Digital Camo Rifle Case With External Mag Pouch Pockets.

 Specs:
D-Rings
45" L X 13" H
Owner ID Window
Adjustable Shoulder Sling
High Density Foam Inner Padding
5 External Mag Pouch Pockets
Limited One Year Warranty

 

$ 19.99/ Each Click to view this Product
-
-
  Sniper Rifle Drag Bag Digital Camo
The Visim CVDB2912D Tactical Sniper Rifle Drag Bag Gun Case are currently used by the special force snipers to carry ther sniper rifle and gear through the most rugged terrain. This sniper drag bag gun case is constructed of heavy duty super tough PVC coated material with thick padding throughout for weapon protection. Sniper drag bag holds 2 full size rifles (max 46" long) in place with straps to a secure tight fit. Comes with a padded removable center divider for added weapon protection. Sniper drag bag also features reinforced shoulder straps and carry handles throughout for carrying the case in a variety of ways. Drag bag has shoulder straps & sternum strap provided wich allows you to carry the drag bag like a back pack. Drag bag has 4 zippered external pockets and 1 internal pocket for storing all of your extra gear like binoculars, spotting scope, tripod, survival knife, laser rangefinder, log book, extra ammo, targets and more. Limited one year warranty. Color Is Digital Camo.

Sniper Tactical Drag Bag Specs:
Heavy duty PVC coated material
4 external compartments
Drag handles
Front rear cargo pouches
Main compartment: 46" L X 10" H X 4" D
Holds 2 full size rifles Up to (46")
1 internal pocket
Padded removable center divider
Interior weapon securing straps
Thick padding throughout
Color Is Digital Camo
2 Drings
Adjustable shoulder straps
Heavy duty zippers & snap closures
Limited One Year Warranty

We have Sniper Drag Bags available in the following colors below.
Tan Item # CVDB2912T
Green Item # CVDB2912G
Black Item # CVDB2912B
Digital Camo Item # CVDB2912D
$ 58.00/ Each Click to view this Product
-
-
  Sniper Drag Bag Desert Tan
The Ncstar CVDB2912T Sniper Tactical Drag Bag Gun Case are currently used by the special force snipers to carry ther sniper rifle and gear through the most rugged terrain. This sniper drag bag gun case is constructed of heavy duty super tough PVC coated material with thick padding throughout for weapon protection. Sniper drag bag holds 2 full size rifles (max 46" long) in place with straps to a secure tight fit. Comes with a padded removable center divider for added weapon protection. Sniper drag bag also features reinforced shoulder straps and carry handles throughout for carrying the case in a variety of ways. Drag bag has shoulder straps & sternum strap provided wich allows you to carry the drag bag like a back pack. Drag bag has 4 zippered external pockets and 1 internal pocket for storing all of your extra gear like binoculars, spotting scope, tripod, survival knife, laser rangefinder, log book, extra ammo, targets and more. Limited one year warranty. Color Is Desert Tan

Sniper Tactical Drag Bag Specs:
Heavy duty PVC coated material
4 external compartments
Drag handles
Front rear cargo pouches
Main compartment: 46" L X 10" H X 4" D
Holds 2 full size rifles Up to (46")
1 internal pocket
Padded removable center divider
Interior weapon securing straps
Thick padding throughout
Color Is Tan
2 Drings
Adjustable shoulder straps
Heavy duty zippers & snap closures
Limited One Year Warranty


We have Sniper Drag Bags available in the following colors below.
Tan Item # CVDB2912T
Green Item # CVDB2912G
Black Item # CVDB2912B
Digital Camo Item # CVDB2912D
$ 58.00/ Each Click to view this Product
-
-
  Black Tactical Rifle Gun Case Scope Ready 45"

NcStar Black Tactical Rifle/Gun Case Scope Ready Case, It Is Wider To Allow Room For Scoped Rifles. Gun case has extra mag pouch pockets. Gun Case is constructed of tough pvc material lined with high density foam inner padding for superior gun protection. This tactical Gun case features heavy duty double zippers and padded carry handle, adjustable shoulder sling and owner ID Window. The covered exterior pockets can store extra magazines, vertical grips, tactical flashlights, laser sights or any other kind of weapon accessories you want to take along. Gun case measurements provided are the outside overall length & height of the gun case. We have a full range of gun case sizes to fit almost any rifle or shotgun. This case is  42" L x 16" H. Color Is OD Green. Gun case has Limited one year warranty.

We Recommend A Gun Case That Is At Least +2" Longer Than The Firearm'S Overall Length, For A Proper Fit. 

NcStar OD Green Tactical Rifle Case With External Mag Pouch Pockets.

 Specs:
D-Rings
45" L X 16" H
Owner ID Window
Adjustable Shoulder Sling
High Density Foam Inner Padding
5 External Mag Pouch Pockets
Limited One Year Warranty

 

$ 23.99/ Each Click to view this Product
-
-
  Rifle Case Shooters Mat Black
The CVSM2913B NcSTAR Rifle Case/Shooting Mat In Black Allows You To Take Your Favorite Hunting Rifle Or Gun Deep In To The Wood Or Field. This Deluxe Rifle Case doubles as a Shooting Mat. The thickly padded case protects your rifle while transporting to the range. When you arrive at your shooting range, the rifle case transforms into a padded Shooting Mat for a more comfortable shooting platform when shooting prone. Includes backpack straps for easy transporting to the range. Outside features: Heavy Duty zippers, adjustable compression straps with quick connect plastic buckles, wrap around carry handle straps, MOLLE webbing sewn to one side to attach other MOLLE compatible gear to the case, ID Card window, a drag strap that stores in its own hook and loop compartment, 1? webbing sewn to the backside to re-enforce when dragging the Rifle Case along the ground, extended zipper flaps help keep debris and some weather from entering through zippers. Inside Features: three padded panels for comfort when shooting prone and to protect rifle when transporting, dedicated one piece cleaning rod compartment, slip resistant elbow panels, muzzle pouch for the rifle and an adjustable elastic bungee cord and plastic buckle for securing rifle stock to case for transport, two removable panels with zippered compartments (9? W X 7½? H), one panel with elastic bands for storing individual cartridges and another panel with a plastic window for storing ballistic charts and maps, extended lower panel for keep your lower extremities out of the dirt. Padded panels. The Rifle Case/Shooting Mat has backpack straps integrated into the back panel. The backpack straps are stored/tucked into hook and loop compartments when not in use. The shoulder straps are padded for comfort and to spread the load over your shoulders, it also has a sternum & waist strap to secure the Rifle Case to your body and allows you to carry the Rifle Case like a backpack. This frees up your hands to carry other gear to your favorite shooting spot.One piece cleaning rod compartment. Main compartment: 48? L X 11? H X 1¾? D. Rifle Case unfolds into a 66? L X 35? W Shooter?s Mat. Approximate weight is 6 pounds.
$ 53.95/ Each Click to view this Product
-
-
  Rifle Case Shooters Mat Tan/FDE
The CVSM2913T NcSTAR Rifle Case/Shooting Mat In Tan/FDE Allows You To Take Your Favorite Hunting Rifle Or Gun Deep In To The Wood Or Field. This Deluxe Rifle Case doubles as a Shooting Mat. The thickly padded case protects your rifle while transporting to the range. When you arrive at your shooting range, the rifle case transforms into a padded Shooting Mat for a more comfortable shooting platform when shooting prone. Includes backpack straps for easy transporting to the range. Outside features: Heavy Duty zippers, adjustable compression straps with quick connect plastic buckles, wrap around carry handle straps, MOLLE webbing sewn to one side to attach other MOLLE compatible gear to the case, ID Card window, a drag strap that stores in its own hook and loop compartment, 1” webbing sewn to the backside to re-enforce when dragging the Rifle Case along the ground, extended zipper flaps help keep debris and some weather from entering through zippers. Inside Features: three padded panels for comfort when shooting prone and to protect rifle when transporting, dedicated one piece cleaning rod compartment, slip resistant elbow panels, muzzle pouch for the rifle and an adjustable elastic bungee cord and plastic buckle for securing rifle stock to case for transport, two removable panels with zippered compartments (9” W X 7½” H), one panel with elastic bands for storing individual cartridges and another panel with a plastic window for storing ballistic charts and maps, extended lower panel for keep your lower extremities out of the dirt. Padded panels. The Rifle Case/Shooting Mat has backpack straps integrated into the back panel. The backpack straps are stored/tucked into hook and loop compartments when not in use. The shoulder straps are padded for comfort and to spread the load over your shoulders, it also has a sternum & waist strap to secure the Rifle Case to your body and allows you to carry the Rifle Case like a backpack. This frees up your hands to carry other gear to your favorite shooting spot.One piece cleaning rod compartment. Main compartment: 48” L X 11” H X 1¾” D. Rifle Case unfolds into a 66” L X 35” W Shooter’s Mat. Approximate weight is 6 pounds.
$ 53.75/ Each Click to view this Product
-
-
  Tactical Cheek Pad Stock Riser With Magazine Pouch Black
Black Tactical Cheek Pad Stock Riser With Magazine Pouch. This is a Universal design cheek rest soft stock riser with ambidextrous detachable magazine pouch it will fit most traditional style rifle stocks. Allow for better eye placement with your scope by giving you a tight cheek weld for optimum accuracy with comfort a softer and more ergonomic cheek positioning. Fast easy lace on installation and removal justs slides over your buttstock and the tightens down with heavy duty adjustable nylon cord with cord keeper to help prevent loosening. Mag pouch can be placed on either the right or left side of the cheek rest fast and easy hook and loop attachment system. Magazine pouch is adjustable and will fit 5.56/223 and 7.62x39 rifle magazines. The Rifle magazine pouch has adjustable cord strap to adjust for different length magazines large or small. Also available in black, tan and green.

Specifications
Universal Design
Ambidextrous Magazine Pouch
Will Fit 5.56mm Nato / 223 Rem Rifle Magazine
Will Fit 7.62x39 Rifle Magazines
Magazine Pouch Is Adjustable
Comfort Soft Cheek Pad Riser / Rest 
Style Lace On Ensures Tight Fit
Fit Most Traditional Style Rifle Stocks
Color Black

$ 9.99/ Each Click to view this Product
-
-
  Tactical Cheek Pad Stock Riser With Magazine Pouch Tan/FDE
This Tan/FDE Tactical Cheek Pad Stock Riser With Magazine Pouch is a Universal design cheek rest/soft stock riser with ambidextrous detachable magazine pouch and it will fit most traditional style rifle stocks. Allow for better eye placement with your scope by giving you a tight cheek weld for optimum accuracy with comfort a softer and more ergonomic cheek positioning. Fast easy lace on installation and removal justs slides over your buttstock and the tightens down with heavy duty adjustable nylon cord with cord keeper to help prevent loosening. Mag pouch can be placed on either the right or left side of the cheek rest fast and easy hook and loop attachment system. Magazine pouch is adjustable and will fit 5.56/223 and 7.62x39 rifle magazines. The Rifle magazine pouch has adjustable cord strap to adjust for different length magazines large or small. Also available in black, tan and green.

Specifications
Universal Design
Ambidextrous Magazine Pouch
Will Fit 5.56mm Nato / 223 Rem Rifle Magazine
Will Fit 7.62x39 Rifle Magazines
Magazine Pouch Is Adjustable
Comfort Soft Cheek Pad Riser / Rest 
Style Lace On Ensures Tight Fit
Fit Most Traditional Style Rifle Stocks
Color Tan/FDE
$ 9.99/ Each Click to view this Product
-
-
  Mauser K98 Scope Mount And Scope Kit Illuminated
Mauser Karabiner Kar K98 Rifle Scope With Mount, Rings Lens Caps ILLUMINATED RETICLE. Mount Fits on front Iron sight leaf foward of the bolt so you do not have to change the bolt handle. This Mauser Sniper Rifle Scope kit is a great deal turn your old Mauser rifle into a long range sniper hunting rifle great for hunting. You get a complete kit K98 Mauser rifle scope with Illuminated reticle with 7 power settings & Scope mount, Scope rings, lens polishing cloth and lens caps. The Reticle is laser lit for day or dusk shooting with 7 variable power settings. FITS German K98 Mauser, VZ. 24 rifle Yugo 48/48A Turned Bolt, Yugo 24/47 Straight Bolt, Turkish 1903/1937/1938/1946 & Swiss Models.

This Mauser Karabiner 98k Rifle scope mount is very easy to install First you punch out rear sight leaf pin and then remove rear sight leaf & spring then Put scope mount between sight ears and tighten the side screws evenly turn for turn each side. Then Loosen one top screw and tighten the other to adjust the mount elevation until it levels with your rifle barrel that's it your done.

K98 Mauser Scout Sniper Rifle Scope Specs:
Magnification: Zoom 2X-7
Illuminated Reticle
Objective Dia. Mm: 32Mm
Finish: Black
Tube Dia: 1"
Field Of View @ 100 Yrs (Feet) : 15.50 - 4.5
Lens Coating: Blue
Length Inches: 11.00"
Wt. Ounce: 9.00 Oz.
Long Eye Relief Inches: 8.7 - 10.67
Reticle: Illuminated Plex Crosshair 7 Power Settings
Scope Ring Mount: Yes
Mauser 98 Scope Mount Included :Yes
Lens Caps : Yes
Polishing Lens Cloth : Yes
Comes With A Lifetime Limited Warranty
$ 79.99/ Each Click to view this Product
-
-
  Mauser Karabiner 98k Rifle Cleaning Brush
New Mauser bore brush Karabiner K98 Rifle Cleaning Brush For 7.92x57mm / 8mm. 2-3/4" long. This Mauser k98 accessories will work with all standard 8-32 thread cleaning rods. 1pc.
$ 2.99/ Each Click to view this Product
-
-
  Mauser Bolt Handle
MBH1800 Advanced Technology (ATI) Mauser Karabiner Kar K98 Conversion Bolt Handle Converts straight bolt or ďwide-arc" bolt to bent bolt; necessary to mount a scope on Mauser Karabiner 98k Rifle. Includes drill bit, tap, hardware and installation instructions. Made of stainless steel in the USA. A "wide-arc" bolt measures 1.25" or greater from the flat surface of the stock to the top of the bolt handle.

Mauser Bolt Handle
Fits: Mauser 98
Made Of Stainless Steel
Includes Drill Bit, Tap, Hardware And Instructions
Converts straight bolt Mauser or ďwide-arc" bolt Mausers to bent bolt necessary to mount a scope on Mauser 98.
$ 17.99/ Each Click to view this Product
-
-
  UTG Universal Single Rail Rifle Barrel Mount, 5 Slots
The Leapers MNT-BR005S UTG Universal Single Rail Rifle Barrel Mount With 5 Slot Picatinny Rail Fits Barrel Diameter between 51"-.78" inches. Rail allows you to mount bipods, laser sights and flashlight to your rifle barrel. Mount is made from solid aluminum with matte black finish 2 piece design for easy clamping to rifle barrel.

Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 2.4 inch
Width: 1.4 inch
$ 13.95/ Each Click to view this Product
-
-
  UTG 1-4X28 Long Eye Relief Scope Mil-Dot
UTG Leapers SCP3-14LIEMDQ 1-4X28 Long Eye Relief Scope With 36-Color Range Estimating Etched Glass Mil-dot Reticle. Scope Is Built on True Strength Platform Heavy Duty Recoil Rated, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof. This Long Eye Relief Scope Has Up to 14" of Eye Relief Allowing for Effective Use on any Firearm Where the Optics Cannot be Mounted Directly Above the Action. Innovative EZ-TAP Illumination Enhancing (IE) System with Red/Green in Dual-Color Mode and 36 Colors in Multi-Color Mode to Accommodate All Weather/Light Conditions. 1-Click High-tech Illumination Memory Feature Gets You Right Back to the Color/Brightness Setting Last Used. Premium Zero Locking and Zero Resetting Target Turrets with Most Consistent and Precise 1/2MOA per Click Windage/Elevation Adjustment. Emerald Coated Lenses to Achieve Maximum Light Transmission for Best Clarity. Parallax Presetting at 100Yds. Scope Comes with TactEdge Angled Integral Sunshade and Complete with Lever Lock Low Profile Picatinny/Weaver Rings, High Quality Flip-open Lens Caps. UTG Leapers Lifetime Warranty.

Scope Specifiction:
Nitrogen Filled
Fog Proof
Shockproof
Rainproof
True Strength Heavy Duty Recoil Rated
Material: HD Aircraft-Grade Aluminum Alloy
Integral Windage And Elevation
Dual Sealed O-Rings
Fully Coated Lenses
Etched Glass Range Estimating Mil-Dot Reticle
Red/Green Dual Illumination
36 Color Illumination
Sniper Flip-open Lens Caps
Magnification: 1 - 4X
Tube Diameter: 30mm
Objective Diameter: 28mm
Field of View @ 100 yards: 78.4' - 21'
Long Eye Relief: 14" - 8"
Exit Pupil: 28mm - 7mm
Click Value @100 yards: 1/2"
Length: 266mm
Parallax Setting:100 Yds
Batteries: CR2032 3V
UTG Lifetime Warranty
$ 92.99/ Each Click to view this Product
-
-
  UTG 4-16X44 30mm Scope AO 36-color Mil-dot w/ Rings
The Leapers UTG 4-16X44 30mm Scope, AO, 36-color Mil-dot sniper scope come with Weaver/Picatinny rings and features 36 color EZ tap illuminated Reticle scope perfect for just about any long range hunting rifle or AR-15 AR-10 LR-308 tactical sniper rifle. The UTG 4-16x44 scope has a 30mm Tube with Best in Class Multi Emerald Coated Lenses to Achieve Maximum Light Transmission for Best Clarity. Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, fog proof and Rainproof. 4X to 16X Power with Quick Power Selector Ring Perfect for Target Acquisition and Zooming In. Innovative EZ-TAP Illumination Enhancing (IE) System with Red/Green in Dual-Color Mode and 36 Colors in Multi-Color Mode to Accommodate All Weather/Light Conditions.

Enhancing Reticle Visibility and Target Acquisition in the Most Extreme Conditions Day or Night. Most Innovative, Low Profile Illumination Control with 2 Soft and Ergonomic Control Buttons Designed for Most Natural, Smooth and Quick-reaching Hand/Finger Operations. Special Circuit and Housing Design for Uninterrupted Illumination Even Under Heavy Recoil. Scope has Premium Zero Locking and Zero Resetting Target Turrets with Most Consistent and Precise 1/4 MOA per Click Windage/Elevation Adjustment. Side Wheel Adjustable Turret (SWAT) for Parallax Adjustment - from 10 Yards to Infinity; Side Wheel Ready for Optional Swat Big Wheel to Achieve Finer Parallax Adjustment. Scope has a Integrated Angled Front Sunshade Complete with Flip-open Lens Caps and High Quality Max Strength Quick Detach Picatinny/Weaver Rings. Limited Lifetime Warranty. SCP3-U416AOIEW

Magnification: 4X - 16X
Tube Diameter: 30mm
Objective Diameter: 44mm
Field of View @ 100 yards: 24' - 6.8'
Eye Relief: 3.2"-3.0"
Exit Pupil: 10.2mm - 2.8mm
Click Value @100 yards: 1/4"
Fully Multi Coated lens
Reticle Mil-Dot
Illumination 36 Color Spectrum
7 Brightness Settings
+ Red/Green Illumination
Nitrogen Filled
Shockproof
Fogproof
Waterproof.
Integrated Sunshade
Length: 390mm
Heavy Recoil Rated
Finish Matte Black
Weight: 28.5 oz
Parallax Setting: 10 Yds - Infinity
Batteries: CR2032
Quick Detach Picatinny/Weaver Rings
Lens Cover Included
Limited Lifetime Warranty

Deluxe Add-on Swat Wheel for Side Wheel Adjustable Turret Not included But Available Item #SCP-SW080LP Make a Great addition to this already incredible Swat Scope.

( We suggest Extra Batteries Item # CR2032 )

$ 117.95/ Each Click to view this Product
-
-
  Mauser 98 Scope Mount - Large Ring Mauser Scope Mount Base
German Mauser 98 Scope Mount Large Ring Mauser Scope Mount Base 1-piece picatinny weaver-style scope mount excellent quality air craft grade aluminum. Scope mounts over Mauser 98 receiver, slots on scope base rail mount allow for flexible eye relief adjustments. Includes mounting screws and tool. Note this is a a drill and tap mount. Fits Mauser 98 rifles One-piece fully slotted from tip to tail Contoured and tapered for perfect fit.
$ 18.95/ Each Click to view this Product
-
-
  Sightmark 8mm x 57 (R) Mauser Boresight
Sightmark 8mm x 57 (R) Mauser Boresight Rifle Boresight SM39034 Sightmark Laser Bore Sights provides the most convenient and accurate method for sighting in rifles of all types. Simply chamber the bore sight like a regular bullet and a laser dot will show exactly where the rifle is aiming; itís easy to sight in any scope without firing a single shot. Live fire is only needed to fine tune the weapon being sighted in order to compensate for inconsistencies, such as bullet drop due to distance. Perfect for hunters, competitive shooters and law enforcement, the Sightmark™ laser bore sight is sure to take the frustration out of sighting in almost any gun. Itís easy to use and will quickly save both time and money by avoiding prolonged live fire tests at the range; use the extra ammo for honing those shooting skills and for the hunt. A lightweight carrying pouch protects the laser for convenient use in the field. The Sightmark™ laser bore sight is available in several calibers and gages for use with all the most popular rifles and shotguns. SM39034

Sightmark 8mm x 57 (R) Mauser Boresight Rifle Boresight SM39034

Features
Precision accuracy
Reliable and durable
Fastest gun zeroing and sighting system
Reduce wasted cartridges and shells
Compact and lightweight
Easy to pack and travel
Comes with a carrying case
Laser wavelength 632 - 650 mm
LED type visible red laser
Power <5MW
Battery 2x AG5
Battery life About 1 hour
Range for sighting 15 - 100 yards
Dot size 2" at 100 yards
Operation On / Off end cap
Construction Brass
Temperature -10°- 50°
(Comes with Carrying Pouch)


We have Sightmark™ laser bore sights available in several calibers and gages for use with all the most popular rifles, pistols and shotguns.

( We suggest Extra Batteries Item # AG5 )

 
$ 29.99/ Each Click to view this Product
-
-
  Scope Mount For Mauser 96/98 & Mosin-Nagants Rifles
This no drill Mauser scout scope mount is a Military rifle mount that fits Mauser 96/98 & Mosin-Nagants rifles. Scope mount fits Chinese type 53 mosin nagants, Mauser 96 and 98, and most other Mosin-Nagant rifles, it simply replaces the rear sight for easy installation. The mount is elevation adjustable and it is made from hardened black anodized aircraft grade aluminum. No gunsmithing is required to install. Limited Lifetime Warranty.

Mount Specs.
Picatinny/Weaver-type rail.
Fits Chinese 53 mosin, Mauser 96, 98 and Most Mosin-Nagants.
Scope mount replaces rear sight.
Elevation adjustment.
Scout scope ready.
Made from Hardened Aircraft Aluminum.
Finish Satin black.
Length 4.69"
Width 0.85"
Height 0.58"
$ 36.99/ Each Click to view this Product
-
-
  German Mauser 98 Large Ring Mount
This high quality Mauser scout scope mount is a Military K98 scope mount base that fits German Mauser 98 Large Ring rifles with no drilling Picatinny/Weaver style rail is perfect for scout scopes. This no drill Mauser K98 large ring scout mount replaces rifles rear sight and features elevation adjustment. Mount is CNC machined form aircraft grade aluminum with black matte hard anodized finish. Limited Lifetime Warranty.

Mount Specs.
Picatinny/Weaver-type rail
Fits German Mauser K98 Large Ring
Scope mount replaces rear sight
Elevation adjustment
Scout scope ready
Style Scount Mount
Length 4.49"
Width 0.85"
Height 0.55"
$ 36.95/ Each Click to view this Product
-
-
  UTG Shooter's SWAT Bipod, Rubber Feet, Height 6.2"-6.7"
The Leapers TL-BP28S UTG shooter's SWAT combat profile bi-pod is a foldable tactical low profile bi-pod. This UTG bi-pod is high quality and durable aluminum construction lightweight strong and built to last. The bi-pod has adjustable leg length and provides range from 6.2 to 6.7 inches high. It features a dual mounting system and comes with Picatinny mounting deck and a swivel stud mount. The rubberized comfort stand and unique posi-lock feature prevent it from tipping. One year warranty.

Bipod Specs
Panning:Yes
Posi-lock: Yes
Extendable Legs: Yes
Foldable Arms: Yes
Swivel Stud Mount:Yes
Picatinny Mount: Yes
Reversible Arms-Folding Yes
Stand: Rubberized
Center Height (Min-Max): 6.2"-6.7"
Leg Length (Min-Max): 6.7"-7.5"
$ 34.95/ Each Click to view this Product
-
-
  UTG Synthetic Clamp-on Bi-pod
Leapers TL-BP70 UTG Synthetic Clamp-on Bi-pod is lightweight and made of durable Zytel. Bipod is Extremely light weight only 6oz. The UTG Synthetic Clamp-on Bi-pod fit around most rifle barrels and makes a great accessory for your AR-15, M4, M16A1 and A2 rifle.This lightweight bipod for rifles folds to be carried in your pocket or bag. Very sturdy and affordable. Best valued economic solution for your practical need. Utg Lifetime limited warranty.

This Clamp-on Bi-pod fit around most tactical and hunting rifle barrels fast and easy.
$ 6.49/ Each Click to view this Product
-
-