UTG PRO 30mm 2PCs High Profile P.O.I Picatinny Rings
The Leapers UTG PRO 30mm 2PCS high profile P.O.I Picatinny rings are 50 caliber BMG Rated. These UTG Pro 30mm scope rings fit on Mil-spec 1913 Picatinny rail platforms. The UTG Pro High Profile P.O.I® (Precision Optics Interface) Rings have a 37mm center height and can fit optics with a 30mm tube and an outer objective of up to 73mm. The Innovative P.O.I (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings. The heavy recoil rated scope rings are progressive machined for a precise inner ring surface to achieve a seamless ring-to-scope interaction. The Low Profile and flush-fitting Locking Side Plate are controlled by dual spring-loaded guide rods. The loaded guide rods interface with the rail with torx screw locking to ensure a secure and repeatable zero hold. The Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations. The two-piece ring set comes with four top steel torx screws on each ring and has a 22mm ring width. UTG PRO Original Snag-free Contoured Profile with Reduced Weight and Size. UTG Pro made in the USA lifetime warranty.
NOTE: We recommended to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
