UTG PRO 34mm/2PCs High Profile P.O.I Picatinny Rings
This Leapers RWU013420 UTG PRO 34mm/2PCs High Profile P.O.I Picatinny Rings are .50 caliber BMG Rated and mad in the USA. Scope rings Are Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms. High Profile P.O.I (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 34mm Tube, and up to a 73mm Outer Objective. The Innovative P.O.I (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings. Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction. Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold. Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations. 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize. UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size. Limited lifetime warranty.
NOTE: We recommended to tighten this ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.