Combathunting.com

Combathunting.com: Item#

pic Shopping
All Categories
Special Deals!... Buy One and get any 2nd listed Item at 5% Off

  Item Price Image Action
-
  Winchester 1200/1300 Adjustable Stock and Forend
The Winchester 1200/1300 12 Gauge Shotgun tactical adjustable stock and forend replacement conversion kits come with a six-position adjustable pistol grip shotgun stock with an X1 recoil reducing butt-pad. The stock has a dual-sided QD sling attachment point. The stock and forearm are made from DuPont extreme temperature glass reinforced polymer. Forend has an ergonomic design with a sure-grip texture. Length of Pull: 12 1/8"–15". Easy Installation. Adapters for all supported models are included. All mounting hardware is included. The stock and forearm are both made in the USA and have a limited lifetime warranty.

Note: Both Items In Package Fit: Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300, Winchester 120 Ranger Shotguns. Does Not Fits Winchester SXP Model.

Note: Shotgun Forend for *Mossberg require a 6 3/4" slide action tube Note *The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.

Notes: For 12 Gauge shotguns Only. Does Not Fit 20 or .410 Gauge Shotguns. Warning!!! - Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty.

Note: We Suggest Tactical QD Single Point Bungee Sling To Go With This Stock Item # PVC-GB507B
$ 89.99/ Each Click to view this Product
-
-
  Tactical Shotgun Forend Destroyer Gray
ATI Destroyer Gray Tactical Shotgun Forend with Picatinny Rails Fits Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300/SXP Shotguns. This Universal Tactical Shotgun Forend for mossberg shotguns has 2 Rail Locations at 90° Increments Around Forend. Comes With Tactical Shotgun Picatinny Rail Package. One Left 2" Picatinny Rail, One Right 2" Picatinny Rail. Rails Allow for Easy Installation of all Your Favorite Accessories. 2 Blank Inserts for When Rails are Not in Use. Textured Forend Very Tough, yet Extremely Lightweight. Made From DuPont Extreme Temperature Glass Reinforced Polymer. Manufactured in the USA ATI Limited Lifetime Warranty.

Note Mossberg / Maverick 88 forends require a 6 3/4" slide action tube in order to Fit check your shotgun before you order.

Note *The forend included in this package is compatible with most Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.  Warning!!! - Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty.

Fits: Most 12 GA Mossberg 500/535/590/835, Maverick 88, Remington 870, and Winchester 1200/1300/SXP Shotguns. Does Not Fit: Remington 870DM & Mossberg 590M.
$ 29.99/ Each Click to view this Product
-
-
  Winchester SXP 12 GA Tactical Shotgun Forend Black
ATI A.5.10.1043 Winchester SXP 12 GA ATI Tactical Shotgun Forend Color Black. Comes With Tactical Shotgun Picatinny Rail Package One Left 2" Picatinny Rail, One Right 2" Picatinny Rail. Picatinny Rails Allow for Easy Installation of all Your Favorite Accessories. Shotgun Forend  Has Textured Grip and it is Very Tough and Extremely Lightweight Made From DuPont Extreme Temperature Glass Reinforced Polymer. Manufactured in the USA Limited Lifetime Warranty.

Fits: Winchester SXP 12 Gauge Shotguns.
SEC922R: As Per ATI products are manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.
$ 29.99/ Each Click to view this Product
-
-
  Sling Swivel 1 1/4" Wide High Quality Steel
ATI A.5.10.2506 Sling Swivel 1 1/4" Wide Fits All Standard Sling Swivel Studs On rifles and shotguns. Virtually Indestructible made from High Quality E-Coated Steel Manufactured in the USA. Qty. 1. Limited Lifetime Warranty.

Qty. 1
Easy Installation
High Quality E-Coated Steel
Accepts up to 1 1/4" Wide Slings
Virtually Indestructible
Manufactured in the USA
Limited Lifetime Warranty
 
Fits Standard Sling Swivel Studs
$ 6.99/ Each Click to view this Product
-
-
  ATI X1 TactLite Scorpion Razorback Recoil Pad Upgrade Kit
ATI gunstocks scorpion razorback X1 Recoil Reducing Butt-Pad for ATI's Tactlite stocks is 1" Thick Butt-Pad for recoil absorption of heavy loads. The razorback recoil pad allows recoil impact to be absorbed with no pain being transferred to the shooter and remains flexible in extreme temperatures. ATI Limited Lifetime Warranty. Made in the USA.

Standard Thickness
Mounting plate included
ATI Manufactured in the USA
Limited lifetime warranty
Fits: ATI's Tactlite Stocks Only.

Also available in X2 Thickness Razorback Recoil Pad Item # A.5.10.2530.
$ 15.99/ Each Click to view this Product
-
-
  Winchester SXP 12 GA Tactical Shotgun Forend Gray
ATI A.5.40.1043Winchester SXP 12 GA ATI Tactical Shotgun Forend Color Destroyer Gray. Comes With Tactical Shotgun Picatinny Rail Package One Left 2" Picatinny Rail, One Right 2" Picatinny Rail. Picatinny Rails Allow for Easy Installation of all Your Favorite Accessories. Shotgun Forend  Has Textured Grip and it is Very Tough and Extremely Lightweight Made From DuPont Extreme Temperature Glass Reinforced Polymer. Manufactured in the USA Limited Lifetime Warranty.

Fits: Winchester SXP 12 Gauge Shotguns.
SEC922R: As Per ATI products are manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.
 
$ 29.99/ Each Click to view this Product
-
-
  Tactical Shotgun Sling with Shellholder
This SWAT black universal tactical combat shotgun sling shell holder bandolier holds 15 extra 12 gauge rounds and attaches to standard sling swivels with durable steel spring hooks. Fully adjustable combat-hunting shotgun sling in black. This shotgun sling is constructed of high-quality elastic and 2 inches of nylon webbing. The non-slip backing keeps the sling in place. The Bandolier sling's maximum length is 51". It fits most shotguns with standard sling swivel loops, or you can put a small key ring through your sling stud. The snap cooks will not attach directly to the studs.
$ 19.99/ Each Click to view this Product
-
-
  Shotgun Sling 15 Round Shot Shell Bandolier Two Point Sling FDE/TAN
This FDE/TAN tactical shotgun combat sling holds 15 rounds of your favorite shotgun ammo. The shot shell bandolier two-point sling comes in tan-flat-dark earth. The bandolier sling holds 15 2 " or 3" shotgun shells and comes with 2 sling swivels. This Tactical Shotgun Sling with a shell bandolier has a padded cover to secure shotgun shells in place. The padded sling cover attaches to the sling via hook and loop fasteners. The barrel end of the sling has an elastic band section to absorb the shock when walking with the shotgun shouldered. There is also a padded shoulder pad covering the shoulder area of the sling to make it more comfortable when shouldered. The shoulder pad has 1" of web material sewn on to provide attachment points for attaching a pocket knife, multi-tool, or flashlight. It includes a pair of 1" Sling Swivels to attach to the sling studs on your shotgun, or the sling can attach directly to the sling loops on your shotgun. Length: adjustable from 33.0" to 55.0".
$ 36.99/ Each Click to view this Product
-
-
  Tactical Green Laser Sight With Weaver & Base Pressure Switch
This Military style universal green laser sight for your rifle or shotgun features a one-inch Weaver-Picatinny laser mount and a tactical laser remote pressure switch with a momentary end cap switch. The purpose of this tactical green laser sight is to deliver fast target acquisition anytime day or night. This green laser sight is suitable for any rifle, shotgun, or AR pistol. It is quick and easy to operate and mount. This tactical laser sight It is great for military use, police, and SWAT. It is suitable for all environments, from the forest to the desert. It has O-ring seals for weatherproofing. It includes a pressure pad switch and a push momentary switch button, as well as an allen wrench for mounting and a 3 volt lithium battery.The range is up to 1-mile at night, and the range is with optimum weather conditions. The green laser beam is superior to red lasers. It is even visible in broad daylight, 20 times brighter than red laser gun sights. This laser is easily adjusted with standard X-Y windage and elevation adjustments. This laser attaches to the Weaver-Picatinny rails system and scope mounts found on many tactical rifles. The laser sight has an aircraft grade aluminum construction with a black hard anodized finish. manufactures a one year warranty.

Universal Green Laser Sight System Specifications

Weight. 5.2 Ounces With Batteries
Length. 3.95" X 1.0"
Power Output.<5Mw Continuous (Class Iiia)
Module (Standard) 532 Nm Green Laser Diode
Range Up To 1-Mile At Night With Optimum Conditions
Range (Up To 200 Yards Day Time)
Batteries(1) Cr123A 3Volt Lithium Battery
Battery Life. Over 3.00 Hours Continuous
Beam Size Approx. 1.75" @ 100 Yards
Adjustment .5 Feet Adjustment Movement 
Windage And Elevation
Color: Black
Material: T6 Aluminum
Water-Resistant O-Ring Sealed For Weatherproofing.
Comes With Coiled Remote Tactical Laser Switch.
Comes With Battery
Manufactures one year warranty.

( We suggest Extra CR123A 3Volt Lithium Batteries For Flashlight Item # 123A Batteries )
$ 59.99/ Each Click to view this Product
-
-
  Tactical Flashlight 3 Watt Ultra-Bright CREE LED
This tactical weapon tactical flashlight for sale is for SBR AR rifles and tactical shotguns equipped with a Picatinny rail. This weapon light comes with a Picatinny ring mount and batteries. It has a 3 Watt Ultra-Bright CREE® LED bulb for long life and durability.This gun mountable tactical flashlight is perfect for your tactical shotgun and tactical rifle with a 160-lumen peak output. This tactical flashlight has an approximately 3.85-hour run time. This is one of the brightest, most versatile, and compact combat tactical flashlights on the market in this price range. It has a blinding 3 Watt Ultra-Bright CREE® LED embedded deep in the reflector for a penetrating beam 12 times brighter than a high-intensity bulb, combining the longevity of an LED with the brightness of a high-powered conventional bulb.are 4.6 inches long, 1 inch wide, and 1.1 inches high.

It comes with a tactical flashlight and a weaver-style ring mount for rifles, shotguns, and pistols. Powered by 2, 3-volt (lithium batteries included), the Tactical Flashlight is machined aircraft aluminum with a black hard anodized finish. Momentary pushbutton or rotate for locked "on" O-ring seal, including pocket clip. It comes with a limited one-year warranty.

All Aluminum Construction
Water Resistant
Recoil Resistant
3 Watt Ultra-Bright CREE® LED
160 Lumens Peak Output
Momentary and Constant On/Off Cap Switch
Includes Weaver Style Ring Mount
Dimensions: 4.6" L x 1.0" W x 1.1" H

We suggest Extra CR123A 3 volt Lithium Batteries Item # 123A Batteries
$ 32.99/ Each Click to view this Product
-
-
  Winchester SXP Tactical Stock Six Position 12/20 Ga
Winchester SXP Shotgun Tactical Stock Six Position 12/20 Ga adjustable stock, with AR-Style recoil pistol grip for Winchester SXP 12 Gauge Shotguns. This Shotgun Stock has Dual-Sided QD sling Attachment Points. Stock provides smooth secure stock adjustments. Stock recoil system absorbs the felt energy regardless of the load size with ultra thick non-slip removable 1-1/4" recoil pad. AR-style recoil pistol grip is non-slip textured. Stock has removable adjustable cheek rest with elongated design to fit all users. Cheekrest provides ½” of Vertical adjustment. Stock is made from DuPont® extreme reinforced polymer. Stock Comes with universal mount system to securely fasten your tactical stock with no specialized tools. Included adapter mounts for All Supported Models in One Package and All Mounting Hardware Included. ATI Manufactured in the USA. ATI Limited Lifetime Warranty.

Fits: Most 12/20-Guage Mossberg 500, 590, 590A1, 590M, 505, 510, 535, 835, and Maverick 88 models, Remington 870/887/7400, Winchester SXP models and Black Shadow, FNH USA P-12, Most Savage Stevens 320 prior to 2016, TriStar Raptor, Charles Daly 301 Pump-Action Field Shotgun 12 ga. Shotguns. Some minor modification may be required on the included adaptor for new SXP model. Note Not compatible with 590 Shockwave, 590M Shockwave, or FLEX models.

Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).

Note: On Some (Newer Models) Savage Stevens 320 produced in 2016 or after they have the new thicker trigger guard, they made changes to there trigger guard and it is thicker in the back. Please Check Your Trigger Guard Before You Purchase! You will need to purchase New Stock Adapter if it is the new style Click Here for Stock Adapter Item # 320-2556.

We Recommend A Single Point QD Bungee Sling To Go With This Stock  A.5.10.2542 or PVC-GB507B.
$ 109.99/ Each Click to view this Product
-
-
  Winchester 1200/1300 Six Position Adjustable Side Folding TactLite Stock FDE
Flat Dark Earth Winchester 1200/1300 12/20 Gauge Shotgun Tactical Stock. ATI Strikeforce Six Position Adjustable Side Folding TactLite Shotgun Stock With Scorpion Recoil System for Winchester 1200/1300. Fits Most Maverick 88, Mossberg 500/535/590/835, Remington 870 and Winchester 1200/1300, 12 GA Tactical Shotguns. Stock Folds to the Left Side of Receiver New and Improved Pivot Housing Assembly With Trak LOCK System Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube. Provides Smooth Secure Stock Adjustments. Eliminates the Need for Secondary Locking Mechanisms With No Snag Points. Dual Sided QD Sling Attachment Point. Scorpion Recoil System With Scorpion T2 Recoil Pistol Grip Extended Scorpion Material to Reduce Recoil and Discomfort to the Shooter’s Hand and Thumb and Eliminates the Felt Punch of the Recoil. .Scorpion X2 Recoil Pad With Sure-Grip Texture Is Non-Slip, Removable. Increased Thickness for Recoil Absorption of Heavy Loads Not Affected by Chemicals. Securely Fasten your ATI Tactical Stock or Rear Pistol Grip with no Specialized Tools and it is Angled, Self-Aligning Dovetail Locking System for Easy Secure Installation. Additional Spacer for when Sling Mount is Not in use. Removable/Adjustable Cheek rest System. Elongated Design to Fit All Users. Includes Tall Cheekrest with 1 ¼” of Adjustment. Includes Short Cheekrest with ½” of Adjustment. Six Degree Drop Tube Adapter for Recoil Comfort. Mounting Hardware Included. Made From DuPont Extreme Temperature Glass Reinforced Polymer. Manufactured in the USA. ATI Limited Lifetime Warranty.

Fits: Most 12/20 gauge Maverick 88, Mossberg 500/535/590/835, Remington 870 and Winchester 1200/1300 12 GA, Winchester 120 Ranger Pump-Action Shotguns. Does Not Fits Winchester SXP Model.

Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).

We Recommend A Single Point Bungee Sling To Go With This Stock A.5.10.2542

We Recommend Tactical Stock Side-Saddle Shot Shell Carrier SSC0100
$ 109.99/ Each Click to view this Product
-
-
  Winchester SXP Tactical Stock FDE Six Position 12/20 Ga
Winchester SXP Shotgun Tactical Stock Six Position 12/20 Ga adjustable stock color is FDE flat dark earth with AR-Style recoil pistol grip for Winchester SXP 12 Gauge Shotguns. This SXP Shotgun Stock has Dual-Sided QD sling Attachment Points. Stock provides smooth secure stock adjustments. Stock recoil system absorbs the felt energy regardless of the load size with ultra thick non-slip removable 1-1/4" recoil pad. AR-style recoil pistol grip is non-slip textured. Stock has removable adjustable cheek rest with elongated design to fit all users. Cheekrest provides ½” of Vertical adjustment. Stock is made from DuPont® extreme reinforced polymer. Stock Comes with universal mount system to securely fasten your tactical stock with no specialized tools. Included adapter mounts for All Supported Models in One Package and All Mounting Hardware Included. ATI Manufactured in the USA. ATI Limited Lifetime Warranty.

Fits: Most 12/20-Guage Mossberg 500, 590, 590A1, 590M, 505, 510, 535, 835, and Maverick 88 models, Remington 870/887/7400, Winchester SXP models and Black Shadow, FNH USA P-12, Most Savage Stevens 320 prior to 2016, TriStar Raptor, Charles Daly 301 Pump-Action Field Shotgun 12 ga. Shotguns. Some minor modification may be required on the included adaptor for new SXP model. Note Not compatible with 590 Shockwave, 590M Shockwave, or FLEX models.

Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).

Note: On Some (Newer Models) Savage Stevens 320 produced in 2016 or after they have the new thicker trigger guard, they made changes to there trigger guard and it is thicker in the back. Please Check Your Trigger Guard Before You Purchase! You will need to purchase New Stock Adapter if it is the new style Click Here for Stock Adapter Item # 320-2556.

We Recommend A Single Point QD Bungee Sling To Go With This Stock  A.5.10.2542 or PVC-GB507B.
$ 109.99/ Each Click to view this Product
-
-
  Tactical Red Dot Reflex Sight With 4 Reticle
This is the greatest affordable reflex sight for the AR-15 and other tactical rifles, and it also works well on shotguns. This tactical reflex sight features 1X magnification and four reticle configurations in red and green dot with five brightness levels for any condition, day or night. This is one of the best red dot reflex holographic sights on the market for the money. It has full windage and elevation adjustment, as well as quick and easy target acquisition for tactical operations, making it a perfect sight for any AR platform or shotgun. The on/off and color switches are controlled by digital push buttons on sight. To change colors, hold for 3 seconds, and to turn off the sight, hold for 5 seconds. The reflex sight is made of aircraft-grade aluminum alloy and finished in a black hard anodized finish. For flexible attachment on AR rifles and shotguns, there is no limit to the eye relief. Batteries are included with the package. Reticles are available in Dot, Bullseye, Cross, and Starburst LED (Light Emitting Diode) patterns that are completely safe for the eyes. Quick installation and removal thanks to the QD integral weaver/picatinny mounting deck.

Specs:
Heavy Recoil Rated
Material: Aircraft-Grade Aluminum
Integral Windage And Elevation
Red/Green Dual Illumination
4 Reticle Options
Magnification: 1X
Objective: 22mm
Lens Coating: platinum
Eye Relief: Unlimited
Exit Pupil: Unlimited
Parallax Setting: 100 Yds
Batteries: LR41 Included
Weaver/Picatinny Mount
Dimensions:L-3.6" W-2.4" H-2.2"
Battery Type: LR41/AG3 (3) included

We suggest extra batteries to go with your refex sight AG3.
$ 59.99/ Each Click to view this Product
-
-
  Buttstock Rifle Cartridge Holder
The black tactical elastic buttstock rifle cartridge holder-ammunition carrier is designed to snugly fit on the stock of your firearm. This butt-stock rifle cartridge holder is a perfect ammunition carrier for hunting and tactical rifles. It gives you quick access to your cartridges. This rifle stock cartridge holder is heavy duty, two-way stretch elastic. It will stretch over most standard rifle stocks and stay securely in place. The holder has 9 elastic loops for individual cartridges that will hold most hunting cartridges from.223,.308 and up. The length is 6.0 inches. The rifle cartridge shell holder can also be used for most smaller caliber shotgun shells, such as 28 gauge or 410.
$ 6.99/ Each Click to view this Product
-
-
  Winchester 1300/1200 Pistol Grip Kit With Tactical Forend
This tactical conversion kit for Winchester 1300/1200 12 gauge shotgun comes with pistol grip kit and tactical forend with two 2 inch picatinny rails for mounting shotgun accessories. Textured Forend and AR Style grip are made from DuPont Extreme Temperature Glass Reinforced Polymer. ATI Manufactured in the USA. Limited Lifetime Warranty.

Note: Winchester Forend Tubes must have a Minimum Length of 6 ¼ Inches is required for use of this forend product and fits most Winchester 1300/1200 12 gauge, Winchester 120 Ranger Pump-Action Shotguns. Does Not Fits Winchester SXP Model.

Warning!!! - Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the ATI Warranty.
$ 59.99/ Each Click to view this Product
-
-
  Shotgun Stock Shell Holder 12/20 Gauge Green
This military green universal buttstock shotgun shell holder for 12/20 gauge shotguns fits most standard shotguns by Mossberg, Remington, Benelli, Winchester, Stoeger, Franchi, and more. The green butt stock shot shell holder slides onto the butt of most shotgun stocks in seconds. The elastic shell holder loops hold five 12/20 gauge shells in place in an easy-access position. Holds 5 extra rounds of 2-1/4" or 3" shells. Length: 6.0"
$ 7.99/ Each Click to view this Product
-
-
  Tactical Green Laser Flashlight Combo For Shotguns & Rifles UTG
This tactical green laser flashlight combo for your shotgun or rifle has a Picatinny mounting deck ideal for AR rifles and shotguns with Picatinny rails. This enhanced UTG 400 lumen flashlight green laser combo for your rifle or shotgun features a power upgrade and an extended 3 hour runtime. The class 3r type green laser is based on a proven true strength (ts) platform with a smart spherical structure. The 4-point design features double coil erector return springs for the most precise laser windage and elevation adjustment and zero hold. Dual-function flashlight end cap with push-button momentary on/off or constant twist on/off activation. The laser has a textured rubber push button on/off laser activation. The adjustable rotating laser bracket provides 10 solid locking positions around the light to ideally place the laser based on the shooter's preferred ergonomics. The integral picatinny/weaver mounting deck with a patented quick-detach lever lock is for effortless installation and removal. It comes complete with an additional flashlight and laser pressure switches. It comes with 2x CR123 and 4x LR44 batteries for immediate use.

Material: Aluminum
Flashlight Bulb Type: 23mm LED IRB
Flashlight Voltage (V): 6
Flashlight Max. Lumen (Lumens): 400
Flashlight Battery Operating Time: 3+
Flashlight Focus: Preset
Laser Control & Adjustment: TS & 4 Points
Laser Beam Movement: 80cm @ 10 m
Laser Type: Classs 3G
Laser Output Power: 2.5 - 3.1mW
Laser Wavelength: 630- 640 nm
Laser Beam Diameter: 15-20mm @ 15m
Laser Operating Temperature: 14 -104 F
Laser Battery Operating Time: 80 mins
Laser Battery Type: LR44 x 4
Laser Range: 500 m
Laser Life Time: 6000 hrs
Pressure Switch Included: Yes
Length: 5.08"
Color: Black

We suggest You Purchase Extra Batteries For This Item # 123A Batteries.
$ 129.99/ Each Click to view this Product
-
-
  UTG Universal Single-rail Shotgun Barrel Mount, 3 Slots
The Leapers UTG universal single rail shotgun barrel mount with 3 slots is compatible with barrels and magazine tube diameter between 75"-1.1" inches around. The universal barrel mount picatinny rail for shotguns is solid aluminum construction with matte black finish. The shotgun barrel mount picatinny rail is easy to install with its two piece design for clamping directly to your shotgun barrels, magazine tube extension and lets you mount laser sights, tactical flashlights or bipod. Fits most shotguns barrels and magazine tubes perfect for Remington 870 1100 11-87 SP-10 Mossberg 500 835 Maverick 88 Winchetser 1300/1200 and many more. Compatible with firearm barrel range diameter .75"-1.1" inches around.
$ 12.95/ Each Click to view this Product
-
-
  12GA Shotgun Magazine Tube Tri Rail Mount 1"
The 12Ga Shotgun Magazine Tube Tactical Tri Rail Mount is perfect for mounting picatinny rail accessories to your Winchester, Remington, or Mossberg shotguns and many more. This 12Ga Shotgun Magazine Tube Rail Mount is designed to fit onto most 1" diameter extended shotgun magazine tubes. When mounted onto your shotgun's extended magazine tube, this will allow you to attach multiple Weaver and Picatinny style accessories to your shotgun, like laser sights and tactical flashlights. This 12Ga Shotgun Magazine Tube Tactical Rail Mount is designed so that you can attach your laser sight and tactical flashlight at any of the 5 angles that the Shotgun Magazine Tube Tactical Rail Mount provides. You can mount your accessories not only at the standard 3, 6, and 9 o'clock positions, but also at the 4/5 and 7/8 o'clock positions. This 12Ga Shotgun Magazine Tube Tactical Rail Mount can also be used on any 1" round diameter accessories with (slide over clearance) like 1" scope tubes, flashlights, and laser sights. It mounts onto the shotgun magazine tube with the two provided Allen head bolts. Installation may require the user to disassemble the shotgun barrel, magazine tube, end cap, or clamp.

Fits 1" Diameter Tubes
Material: Aluminum
Color: Black
Overall Height: 1.5"
Overall Length: 1.4"
Overall Width: 1.5"

Fits Most 12 Ga Tactical Shotguns With 1 Inch Diameter Extended Mag Tube.
$ 14.99/ Each Click to view this Product
-
-
  QD Single Point Bungee Sling With Swivel
This SWAT Black QD Quick-Disconnect Single Point Bungee Sling With Swivel is fully adjustable for rifles and shotguns and features 1.5-inch nylon webbing for comfort. This tactical bungee single-point QD sling is designed to fit six and four-position collapsible stocks on rifles and shotguns with sling-swivel inserts and mount. The single point sling includes a 1.25" non-reflective heavy duty steel push button sling swivel. This tactical single point sling features protected Bungee elastic shock cords to reduce deadweight feel and cushion the body during periods of high activity. Adjustable for length from 46" inches to 64". inches. A Limited Lifetime Warranty.

Works With Rifles, Shotgun, Quad rails Or Any Other Weapon Equipped With Sling-Swivel Inserts.
$ 25.99/ Each Click to view this Product
-
-
  Red Dot Sight Green Laser Sight LED Flashlight Combo
This 3 MOA red dot sight green laser sight led flashlight combo is great for moving targets day or night perfect for tactical rifles and shotguns. This cqb red dot sight has a green laser and flashlight combo that features an ultra bright and tactical led flashlight that puts out 110 lumens, perfect for tactical rifles and shotguns. The main red dot sight has 1x magnification and seven brightness settings, perfect for low light shooting conditions. The Integrated Laser is Independently Adjusted and it is an Ultra Bright Green Laser Sight. This optics body is made of hard anodized aircraft grade aluminum for long life and durability. This red dot sight features an Integrated Weaver/Picatinny Style Quick Release Mounting System on the Unit with an Exclusive Auto Lock Quick Release Lever. A Limited Lifetime Warranty.

Scope Specs:
Nitrogen Filled
Fog Proof
Shockproof
Rainproof
Heavy Recoil Rated
Material: Aircraft Aluminum Alloy
Exterior Finish: Matte Black
Ultra Bright Green Laser
Red Dot 7 Brightness Settings
LED Flashlight
Lens Coating: Yes
Objective Lens Diameter: 42mm
Reticle: Red Dot
Dot Size: 3 MOA
Click Value: 1 MOA
Magnification: 1X
Lens Coating: Ruby
Length: 4.75"
Width: 3.34"
Height: 3.25
QR Mount Length: 3"
Integrated Weaver Style Quick Release Mounting
(1) Battery 3-volt Lithium CR2032 Included
Limited Lifetime Warranty
$ 89.99/ Each Click to view this Product
-
-
  Shotgun Rear Pistol Grip 12/20 ga Destroyer Gray
Destroyer Gray 12/20 gauge shotgun rear pistol grip universal. Rear Pistol Grip Fits most Mossberg 500/535/590/835, Maverick 88, Remington 870/887, Winchester SXP, FNH USA P-12, Savage Stevens 320, TriStar Raptor/ Pump-Action 12 GA Shotguns. This ati shotgun pistol grip has recoil reduction material QD sling attachment point at the rear of the grip. Comes with universal mount system Pistol grip securely fasten to your tactical shotgun with no specialized tools. Adapters mounts included for all supported models in one package and all mounting hardware included. Made from Dupont extreme reinforced polymer. Manufactured in the USA. ATI limited lifetime warranty.

Fits: Most 12/20-Guage Mossberg 500, 590, 590A1, 590M, 505, 510, 535, 835, and Maverick 88 models, Remington 870/887/7400, Winchester SXP, FNH USA P-12, Most Savage Stevens 320 prior to 2016, TriStar Raptor, Charles Daly 301 Pump-Action Field Shotgun 12 ga Pump-Action Shotguns. Note Grip Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).

Note: On Some (Newer Models) Savage Stevens 320 They have made changes to there trigger guard and it is thicker in the back you may need are new adaptor item # 320-2556 click here.

Fit Note: Winchester 1200/1300 12ga shotgun models you will need to purchase an additional Winchester 1200/1300 adaptor item # A.5.10.2558, click here for the adaptor.

We Recommend A Single Point QD Bungee Sling To Go With The Rear Pistol Grips QD Sling Mount A.5.10.2542 or PVC-GB507B.
$ 47.99/ Each Click to view this Product
-
-
  UTG 3.9" ITA Red Green Dot Sight QD
Leapers SCP-DS3039W UTG 3.9" ITA Red/Green Dot Sight with Riser Adaptor QD Picatinny / Weaver Mount and Flip-Open Lens Caps For AR Rifles, Shotguns and pistols. This Tactical Illuminated Combat Reflex Sight is the best way to zero in on your target with lightening-quick precision Instant Target Aiming (ITA) with pinpoint accuracy! The high quality optics in this dual illuminated red dot green dot sight helps to quickly distinguishes between subtle differences of colors and contrasts and catches your eye so that aiming is fast and easy with accuracy. Tactical sight has 1x Magnification, 30MM Diameter, 3.9" Long Micro small With Windage & Elevation Locking System and heavy duty recoil rated. Complete With Both High Profile Cantilever Mount & Low Profile Vertical Mount with Innovative Quick Detach Mounting Deck to Use on Any Picatinny Rail and Flip-open Lens Caps. Limited Lifetime Warranty.

This Tactical Sight is great for combat and tactical situations even better for hunting. This tactical red dot green dot features multi-coated optics with Non-Reflection High Tech Emerald Coatings for increased brightness in low-light conditions and Illuminated reticle dots and easy finger adjustable rheostat patterned Illumination system with variable brightness levels to offers stealthy and Infinitely fine adjustment for greater visibility at sunrise and sunset.

Red/Green Dot Sight is waterproof and shockproof, nitrogen purged and fogproof. The Scope base mounts are picatinny / weaver style scope base. Sight is Optimal Height Design to Co-witness with most Iron Sights. Includes Both High Profile Cantilever Mount & Low Profile Vertical Mount with Innovative Quick Detach Mounting Deck to Use on Any Picatinny Rail.

The Illuminated Combat Red Dot Green Dot Sight makes a great addition to any AR15, M4, M16, AK47, Hipoint 995, Hipoint 4095TS, Hipoint 4595TS, Beretta Cx4 Storm, Remington 870 Shotgun, Mossberg 500 590 535, Winchester 1200/1300, Mavrick 88 Ect. SCP-DS3039W

UTG 5TH GEN™ ITA Combat Red/Green Dot Sight

Specs
Field of View @ 100 yards: 70
Unlimited Eye Relief
Exit Pupil: 22mm
Click Value @100 yards: 1/4"
Parallax Setting: Infinity
4.0MOA Aiming Dot
Heavy Duty Recoil Rated
Shockproof
Fog Proof
Nitrogen Purged
Water Proof
Lightweight
Compact 3.9"
Windage & Elevation Locking
Objective Diameter: 26mm
Magnification (X) 1
(1) High Profile Cantilever Mount
(1) Low Profile Vertical Mount
(1) Flip-open Lens Cap
Mount Are Quick Detach Deck
Rugged, Durable Construction
Reticle Illuminated Red Dot
Reticle Illuminated Green Dot
Variable Brightness Levels
Reticle Size (Diameter, Moa) 4
Optical Coating Yes (Multicoated)
Non-Reflection High Tech Emerald Coatings
Power Supply Battery (Included)
Batteries: CR1620 3V
Battery Life (Hours) 50
Mount Standard Picatinny / Weaver Rail
Housing Construction Aluminum
Tube Length 3.9"
Finish Matte Black
Length (In) 3.9" Approximately
Limited Lifetime Warranty

We Suggest Added Accessories UTG 3X Magnifier Max Strength QD Picatinny Mount Item # SCP-MF3WEQS

We Have AR-15 Carry Handle Mounts Available If You Need One Item # MAR6M2 & AR15/16

We suggest Extra Batteries Item # CR1620
$ 65.99/ Each Click to view this Product
-
-
  UTG Combat Tactical Laser Sight With Windage Elevation Adjustment
Leapers SCP-LS268 UTG Combat Tactical Laser Sight with mount clear and extra bright red laser beam sight with precision wide range windage and elevation adjustments for all firearms, rifles, and shotguns. The Universal Mounting is to be installed on Military Standard Picatinny/Weaver Rails. The Universal Slide-on Mounting Deck is designed to fit most tactical firearms, with or without rail slots. The Ambidextrous Push Button Switch and Remote Pressure Switch. Hard Anodized Finish for Wear Resistance. Great Lasers for a Wide Range of Pistols, Shotguns, and Rifles fit on 1.6" long Picatinny/Weaver Rails. It will fit on Taurus PT 24/7, Smith & Wesson M&P45 and more if your rail is 1.6" long. and others. One Year Limited Warranty.

Item Number SCP-LS268
Output Power 2.5 ~ 3.1mW
Length 65mm (2.559in)
Wavelength 630 ~ 640nM
Main Body Diameter 14mm (0.551in)
Beam Diameter 15 ~ 20mm @15m
Range (Standard) Up to 500 yards at night
Operate Temperature -10°C (14°F) ~45°C (113°F)
Pressure Switch Included
Structure & Adjustment TS & 4 Points Battery 4 x LR44 (AG13)
W/E Adjustment Range 80cm
Shock Proof
Water Resistant
Four AG-13 (LR44) Alkaline Button Cell Batteries
Type CLASS IIIA Laser Beam Life Time 6000 hrs

We Suggest Getting Delux Remote Presure Swich To Go With Your Laser Sight Item # TL-PSLS268

( We suggest Extra Laser Batteries Item # AG13
$ 35.99/ Each Click to view this Product
-
-
  UTG 4" Compact ITA Red/Green Circle Dot Scope QD
Leapers SCP-RG40CDQ UTG 4" Compact ITA Red/Green Circle Dot Sight with Integral QD Picatinny Mount lets you zero in on any target with quick precision pinpoint accuracy. Compact dot sight is has crisp and Vivid Red/Green 4MOA Target Dot and 65MOA Circle with 5 Brightness Settings for Diverse Environmental Background. Instant Aiming and Locking on Target with Great Field of View and Unlimited Eye Relief Non-Reflection High Tech Emerald Coatings. Optimal Height Design to Co-witness with Iron Sights on AR Models. Includes Integral Quick Detach Mounting Deck and Flip-open Lens Caps. This Dot sight it is versatile and ideal for most weapon types AR Rifles Pistols and 12/20 Gauge Shotguns. This makes a great addition to any Smith & Wesson M&P15-22 Rifle, AR15, M4, M16, AK47, Hipoint 995, Hipoint 4095TS, Hipoint 4595TS, Beretta Cx4 Storm, Remington 870 Shotgun, Mossberg 500 590 535, Winchester 1200/1300, Mavrick 88 Ect. Limited Lifetime Warranty. UTG 4" Compact ITA Red/Green Circle Dot Sight with Integral QD Picatinny Mount

Specs
Rugged, Durable Construction
Recoil Shockproof
Lightweight
Compact
Magnification: 1X
Tube Diameter: 38mm
Objective Diameter: 30mm
Field of View @ 100 yards: 16.5'
Eye Relief:Flexible
Exit Pupil: 25.0mm
Click Value @100 yards:1/2"
Reticle Illuminated Red Circle Dot  & Green Circle Dot
Reticle Size (Diameter, Moa 4) Target Dot
 Circle Dot 65MOA 
Click Value: 1 Moa
Lenss Optical Emerald Coatings
Includes Filp Up Lens Covers
Includes Integral Quick Detach Mounting Deck
Power Battery Type: CR2032 3V
Battery (Included)
Battery Life (Hours) 50
Switch (# Of Positions) 5 Red 5 Green
Mount Picatinny / Weaver
Housing Construction Aluminum
Finish Matte Black
Length (In) 95mm Approximately
Limited Lifetime Warranty

Can be used with Tactical 3X Magnifier Item # SCP-MF3WEQS

We Have AR-15 Carry Handle Mounts Available If You Need One Item # MAR6M2 & AR15/16

We suggest Extra Batteries Item # CR2032
$ 48.99/ Each Click to view this Product
-
-
  3-9x42 Illuminated Red Green Rifle Scope Rubber Armored
This tactical rubber armored scope is a 3-9x42 illuminated red-green P4 Sniper retical compact rifle scope, fog proof, nitrogen filled heavy recoil rated. This rubber armored scope comes with Picatinny-Weaver style scope ring mounts. The compact scope body is made from a solid aircraft grade aluminum alloy for durability. This scope features fully multicoated lenses for a bright, clear view that are specifically designed for daytime and low-light shooting conditions. The scope has an LED-illuminated P4 Sniper range finder reticle in green or red when illuminated. It has seven brightness settings to choose from, and the illuminated reticle can be seen day or night. When the tactical scope is powered off, the reticle is normal. This scope will fit a flatop riser or a weaver/picatinny rail system found on AR style rifles or shotguns. The scope also comes with integrated tactical pop-up see-through sniper lens caps and batteries are included. This compact scope is great for carbine rifles like H & K, AK-47, AR-15, M-16, M4, SKS, Hi-Point 995 & 40cal, etc. The scope has a ncstar limited lifetime warranty.

Illuminated Rifle Scope Specs
Fog proof: Yes
Nitrogen Filled: Yes
Heavy Duty Recoil Rated: Yes
Magnification: 3-9X
Objective DIA (MM): 42.00
Tube DIA: 30MM
Field of view @ 100 yards (Feet): 37.7-12.5
Eye Relief (inch): 2.00
Exit Pupil (MM): 14-4.7mm
Click Vaiue 1/2 M.O.A.
Comes with scope rings: Yes
Multi Coated lens: Yes
Lens Coating: Ruby
Reticle: P4 Sniper Rangefinder
N.W. (Oz) 16.5
Length (inches): 7.7
Comes With Built In Pop Up Lens Covers.
2 Weaver/PIcatinny Scope Rings
Scope Body Rubber Armored
Color: Black.
Limited Lifetime Warranty

( We suggest Extra Scope Batteries Item # CR2032 )
$ 99.99/ Each Click to view this Product
-
-
  35 Inch Shotgun Case Soft Padded Black
This 12/20 gauge soft 35 inch shotgun case features high density foam inner padding for superior shotgun protection heavy duty carry straps and lockable double zippers. The padded soft shotgun case has two external 8.0”W X 6.0”H storage pockets with Velcro style flap closures and the outside of the gun case it is constructed of tough 1680 denier PVC material. This shotgun case also has metal D-ring for hanging the case onto a hooks. This case can fit most popular shotgun models in this size range. 35"L x 8.5"H.
$ 36.95/ Each Click to view this Product
-
-
  48 Inch Shotgun Case Soft Padded Black
This 12/20 gauge soft 48 inch shotgun case features high density foam inner padding for superior shotgun protection heavy duty carry straps and lockable double zippers. The padded soft shotgun case has two external 8.0”W X 6.0”H storage pockets with Velcro style flap closures and the outside of the gun case it is constructed of tough 1680 denier PVC material. This shotgun case also has metal D-ring for hanging the case onto a hooks. This case can fit most popular shotgun models in this size range. 48"L x 8.5"H.

We recommend you purchase a gun case that is 2" longer than your rifle or shotgun overall length.
$ 39.99/ Each Click to view this Product
-
-
  Tactical Shotgun Heat shield ATI
This classic tactical shotgun heat shield for shotgun barrels is made from solid shaped steel. The elongated cooling slots on this shotgun heat shield shroud allow maximum, quick dissipation of heat from the tactical shotgun barrel for ultimate protection against burns. This shotgun heat shield It easily adapts to most 12, 16, 20, and 410 gauge pump shotgun barrels. It features a black oxide finish that matches most shotgun components. The shotgun heat shield simply slides onto the barrel and gets secured with the provided hardware. It fits the most popular 12 gauge pump shotguns made today, including Remington 870, Mossberg 500/535/590/835, Winchester 1200/1300, SXP Defender, Mossberg Maverick 88, and many more. It does not fit shotguns with ventilated barrels. It is made in the USA with ATI Limited lifetime warranty.

Steel Formed Shotgun Heatshield
Elongated Cooling Slots for Maximum Dissipation of Heat
Easy Installation - Simply Slide Over Barrel and Secure With Supplied Hardware
13-1/2" Long
Manufactured in the USA
Limited Lifetime Warranty

Note Each heatshield should be custom fitted to smaller barrels. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm, please enlist the services of your local gunsmith. Note: This will only fit your shotgun if the barrel lug is more than 13.5" from the receiver. Measure it before you buy it. You are responsible for any damage caused by improper installation.
$ 23.95/ Each Click to view this Product
-
-
  ATI Shotgun Flashlight Laser Barrel Clamp & Stud
The tactical shotgun mag tube extension magazine clamp/barrel clamp for shotguns with a sling stud swivel mount fits all 12 gauge shotguns. The shotgun magazine clamp strengthens the connection between the 12 gauge shotgun extension tube and the barrel of the shotgun. This magazine clamp for shotguns includes a sling swivel stud that is reversible for right-handed or left-handed shooters. The magazine clamp can be used to secure a 1 inch diameter tactical shotgun flash light or laser sight to the barrel or mag tube. This shotgun magazine clamp is made from injection molded DuPont extreme temperature glass reinforced polymer. It fits all the popular 12 gauge shotguns, Mossberg Maverick 88, Mossberg 500/535/590/835, Remington 870, American Tactical Imports MB3 shotguns, and Winchester 1200/1300 Pump-Shotguns, as well as the majority of other shotguns with a 1 inch mage tube. Lifetime Warranty from ATI.
$ 9.95/ Each Click to view this Product
-
-
  Winchester 1200/1300 Shotgun Rear Pistol Grip ATI
Winchester 1200/1300 tactical shotgun rear pistol grip designed with an ergonomic textured grip for maximum control and comfort with your shotgun. Features include an integral top-mounted sling loop and slimmer style. Scratch proof and Weatherproof. Made in the USA of Black, Glass-Filled Nylon and comes with Lifetime Warranty no gunsmithing. This Universal Rear Shotgun Pistol Grip Has Black Polymer Adapters included to fit 12 and 20 Gauge shotguns. Fits most Mossberg 500/535/590/835, Maverick 88, Remington 870, Winchester 1200/1300, Winchester 120 Ranger Pump-Action Shotguns,and Norinco 98 Series pump shotguns. Norinco 98 Series. Does Not Fits Winchester SXP Model.

Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).
$ 19.99/ Each Click to view this Product
-
-
  Bubble Level For Standard Weaver Base Rail 7/8"
The scope bubble level attaches to standard Weaver/Picatinny rail base 7/8". This scope bubble level helps you ensure that your rifle and scope are perfectly aligned. This optics bubble level Improves your accuracy by ensuring the rifle is level before each shot. It is machined from aluminum with a White line on housing for quick reference. Bubble Level Fits 7/8" Dovetail Weaver Base Rail. Add this bubble level to your gunsmithing tools and scope accessories. This bubble level is a simple way to make sure your scope is level at the range for longer range shooting. The body is made of machined black anodized aluminum.

Note: Fits Weaver-Style Base Rails 7/8". You May Want To Buy One For Each Rifle & Shotgun You Have.
$ 15.95/ Each Click to view this Product
-
-
  Rifle Buttstock Shell/Cartridge Holder FDE/Tan
This tactical fde/tan 9 round ammo elastic butt stock rifle cartridge/shell holder can hold .410, 45-70, 7.62,.223, 308, 7mm, 30.06, 30 to.416 caliber, 308 cal., and 30-30 Win. The shell holder for rifle stocks is a heavy-duty two-way stretch elastic base that will stretch over most standard rifle stocks. The rifle stock ammo shot shell holder slides onto the butt of most standard rifle stocks in seconds and places your ammo in an easy-access position. Length is 6.0 inches
$ 7.99/ Each Click to view this Product
-
-
  Winchester 1200 1300 Tactical Shotgun Top Folding Stock
Winchester 1200/1300 and defender Tactical Shotgun Top Folding Stock. The ultimate compact tough design shotgun top folding stock for Winchester shotguns. Functions in open or closed position. Includes rear pistol grip. Quick release button allows Shotgun buttstock to fold/unfold instantly. Sling swivel stud included. Reversible for right or left-handed shooters. Adapters included. Shotgun Stock is pre-drilled to accept the Shotshell Holder, sold separately. Scratchproof and Weatherproof. Made in the USA of Black, Glass-Filled Nylon and comes with Lifetime Warranty. Fits most 12 & 20 Gauge Mossberg 535/500/500A/590/835, Maverick 88, Remington 870, Winchester 1200/1300 and Defender, Maverick 88 and Norinco 98 Series*. Simple installation - no gunsmithing required.

Fits Most 12 & 20 Gauge Mossberg 535/500/500A/590/835, Maverick 88, Remington 870, Winchester 1200/1300 and Defender, Maverick 88 and Norinco 98 Series*.Simple installation - no gunsmithing required. Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller). Does Not Fits Winchester SXP Model.

Can be Fired in Opened or Folded Position
Pre-Drilled to Accept Shotgun Shell Holder
Pistol Grip
Easy Installation
Ambidextrous
Steel Hardware
Sling Swivel Stud Included
DuPont® Extreme Temperature Glass Reinforced Polymer
Quick Release Button Allows Stock to Lock in Folded/Unfolded Position
Limited Lifetime Warranty

Shotshell Holder Not Included But Available Item # SHO0500

We Also Recommend A Shotgun Heatshield Item Number SBS4600ATI
$ 74.95/ Each Click to view this Product
-
-
  UTG QD Sling Swivel Adaptor Mount Picatinny 45 Angled offset
The Leapers TL-SWPM01 UTG QD sling swivel adaptor mount picatinny 45-angled offset sling swivel mount is precision machined from aircraft grade aluminum with a hard anodized matte black finish. This rugged sling swivel mounting base with max strength torx drive locking screw for picatinny rail is extremely compact, lightweight, and low profile. The utg qd sling swivel adaptor mount accepts any quick detach sling swivel with a 0.37-inch diameter swivel stud. This mount is reversible for right-or left-handed sling use. The qd swivel housing is designed with quarter-turn rotational overtravel stops to better control sling position and movement. It includes a t-20 torx allen wrench for simple and friendly installation, no gunsmith required. Material: aluminum height: 0.38 "Length : 1" color: black. Utg one year limited warranty.

Compatible With UTG Sling Swivels Below.
TL-QDSW08A UTG Standard Push Button QD Sling Swivel, 1" Loop
TL-QDSW08B UTG Standard Duty Push Button QD Sling Swivel, 1.25" Loop
TL-QDSW08C UTG Push Button QD Sling Swivel, 1.25" C-Shape Loop
TL-QDSW18 UTG Heavy Duty Push Button QD Sling Swivel, 1.25" Loop
$ 12.49/ Each Click to view this Product
-
-
  Winchester SXP Rear Pistol Grip & Tactical Forend
ATI Winchester SXP Rear Pistol Grip and 12ga Tactical Forend Kit with Picatinny Rails for Easy Installation of all Your Favorite Shotgun Accessories. Forend and pistol grip made from DuPont Extreme Temperature Glass Reinforced Polymer. Recoil Pistol Grip is Non-Slip Textured and has extended recoil reduction material to diminish discomfort to the shooter’s and and Thumb. QD Attachment Point at the Rear of the Grip. Universal Mount System with adapters Included for All Supported Models in One Package. All Mounting Hardware Included. Manufactured in the USA. ATI Limited Lifetime Warranty.

(1) 12 ga.Tactical Shotgun Forend
(1) 12ga. Tactical T3 Rear Pistol Grip
Adapters & Mounting Hardware Included.

Kit Fits Most : 12 GA Mossberg 500/535/590/835, Maverick 88, Remington 870, and Winchester SXP Shotguns. Note: Does Not Fit 20 or .410 Gauge Shotguns. Some minor modification may be required on the included adaptor for new SXP model.

Note: Mossberg forends require a 6 3/4" slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4" slide action tube. *The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.

Fit Note: Winchester 1200/1300 12ga shotgun models you will need to purchase an additional Winchester 1200/1300 adaptor item # A.5.10.2558, click here for the adaptor.

We Recommend A Single Point QD Bungee Sling To Go With The Rear Pistol Grips QD Sling Mount A.5.10.2542 or PVC-GB507B.
$ 69.99/ Each Click to view this Product
-
-
  12 Ga Shotgun Side Saddle Shotshell Holder 6 Shot
The Quick Detach Side Saddle Universal 12 Gauge Tactical Shotgun Shell Holder/Carrier Holds 6 Rounds. This Side Saddle 6 Shot Shotshell Holder Can Be Mounted On Any 12 Ga. Shotgun Receiver Or Flat Stock With Available Mounting Space. Put It in Any Convenient Location for Fast Reloading. Made From Strong, Durable Metal Alloy With A Split Body Dove Tail Design For 6 Shells, 4 Shells, And 2 Shell Mounting Options. Fast And Easy Mounting And Removal With Hook And Loop Tape. Included is mounting hook and loop tape. It also works great as a separate shotshell storage caddy for your duck blind, duck hunting boat, hunting cabin, or patrol car. No gunsmithing is required.

12 Gauge Shotgun Shell Holder
Designed For 12 Gauge Shotgun Shells
Strong Durable Metal Alloy
Split Body Dove Tail Design
2-4-6 Shell Mounting Option
Easy Mounting And Removal
Approx 6" Long 6 Shell Mounting
Approx 4" Long 4 Shell Mounting
Approx 2" Long 2 Shell Mounting
Holds 6 Rounds Total
No Gunsmithing Required

Fits: Any 12 Gauge Shotguns, Mossberg 500, Remington 870, And Winchester 1200/ 1300 & Maverick 88  And More With Flat Available Mounting Space.
$ 29.99/ Each Click to view this Product
-
-
  Winchester SXP Stock and Forend In Destroyer Gray
This ATT T3 Winchester SXP Stock and Forend Package with shell carrier In destroyer gray, Fits most Winchester SXP 12-Gauge Pump-Action Shotguns. Winchester SXP tactical stock kit comes with one T3 Shotgun Stock with recoil reducing pistol grip in black, Tactical Shotgun Forend with Picatinny Rail Package and a TactLite Stock Shotgun Shell Carrier. Stock is 6-Position Adjustable Mil-Spec. Stock Provides Smooth Secure Adjustments and Dual-Sided QD Sling Attachment Points. X Series Recoil Reducing Pistol Grip has Built In X Series Recoil Absorbing Back strap with Slim Ergonomic Design and Sure-Grip Texture for Increase Control. The stock comes with a X2 Recoil Reducing Butt-Pad Upgraded to 1 1/4" Thick Pad Recoil Impact is Absorbed Reduces Muzzle Lift Eliminates the Felt Punch of the Recoil Shoot Any Load Size with No Pain Transfer to the Shooter. Stock has Slot for Tactical Sling Attachment Adjustable/Removable Cheekrest Elongated Design to Fit All Users. Cheek rest Provides ½” of Vertical Adjustment. Stock Shell Carrier Holds 5 12 Gauge Shotgun Shells. Mounts to the Cheek rest While Still Allowing the Adjustment of the Cheek rest. Can be Added to Either Side of the Stock Stock grip and forend made from DuPont Extreme Temperature Glass Reinforced Polymer. ATI Limited Lifetime Warranty Made in the USA.

Easy Installation Universal Mount System Securely Fasten your Tactical Stock with no Specialized Tools Mounts Included for All Supported Models in One Package All Mounting Hardware Included. Some minor modification may be required on the included adaptor for new SXP model. Note: 12 Gauge Only, Does Not Fit 20 or .410 Gauge Shotguns.

Mossberg forends require a 6 3/4" slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4" slide action tube. *The forend included in this package is compatible with: Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Compatible with removable Remington 870 Forends.

All 3 Items In Package Fit: Most 12-Gauge Mossberg 500/535/590/835, Remington 870 12-Gauge Pump-Action Shotguns and Winchester SXP 12 Ga.

Note: We Suggest Tactical QD Single Point Bungee Sling To Go With This Stock Item # PVC-GB507B
$ 159.99/ Each Click to view this Product
-
-
  Winchester Model 70 Picatinny Rail Two Piece Scope Base Black
This aftermarket Winchester Model 70 two-piece scope mount base feature multi-slot extra long base sections compatible with Picatinny or Weaver scope rings and fits most Winchester Model 70 Short and Long Action rifles. The 2-piece base mount is made from CNC machined T-6160 aircraft aluminum with satin black finish. Mounting screws included No gunsmith required. Fits models with factory tapped holes.
$ 19.99/ Each Click to view this Product
-
-
  Winchester 1200/1300 Tactical Folding Stock & Forearm Kit
This Winchester 1200/1300 Tactical Folding Stock and Forearm Kit with shell carrier, heat shield with ghost ring sight comes in black. This folding stock tactical conversion kit fits most Winchester defender 1200/1300 model 12 GA Pump action Shotguns. Tactical conversion kit comes with one six position adjustable side folding TactLite shotgun stock with recoil system, tactical shotgun forearm/forend with Picatinny rail package and a TactLite stock shotgun shell carrier and classic heat shield with ghost ring sight. The tactical shotgun stock is six-position adjustable and can be side-folding to the Left of the receiver and fired from folded position. The Trac lock system eliminates horizontal and vertical movement of the stock on the buffer tube and provides smooth secure stock adjustments. The stock has built in dual sided QD sling attachment points and removable adjustable cheek rest system designed to fit all users. Stock forend and buffer tube is made from DuPont extreme temperature glass reinforced polymer sratchproof and weatherproof. The X1 recoil reducing pistol grip has sure-grip texture so recoil impact is absorbed and reduces the challenge to reacquire the target by minimizing the muzzle lift. The stocks X2 recoil reducing butt-pad 1 1/4" thick pad so recoil impact is absorbed and eliminates the felt punch of recoil you can shoot any load size with no pain transfer to the shooter and it is not affected by chemicals or extreme temperatures. Stock shell carrier holds five 12 gauge shotgun shells and mounts to the cheek rest while still allowing the adjustment of the cheek rest. Can be added to either side of the stock. This stock kit is fast and easy to install and includes all adapters for all supporting shotgun models with included mounting hardware. ATI limited lifetime warranty made in the USA.
 
Note Fits: Most Maverick 88, Mossberg 500/535/590/835, Remington 870, and Winchester 1200/1300 12 GA, Winchester 120 Ranger Pump-Action Shotguns. Does Not Fits Winchester SXP Model.

Note: Mossberg forends require a 6 3/4" slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4" slide action tube. *The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.

Note: Each Heatsheild should be custom fit. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm please enlist the services of your local gunsmith. Does Not Fit: Any Vented Rib Barrel Models You would have to change your barrel.

Note: We Suggest Tactical QD Single Point Bungee Sling To Go With This Stock Item # PVC-GB507B
$ 179.99/ Each Click to view this Product
-
-
  Winchester 1200/1300 Shotgun Stock Shotgun Destroyer Gray
The ATI Winchester 1200/1300 tactical shotgun stock in Destroyer Gray is the perfect accessory for Winchester 1200/1300 12 gauge shotguns and Defender models. ATI Strikeforce Six Position Adjustable Side Folding TactLite Shotgun Stock With Scorpion Recoil System. Fits Most Maverick 88, Mossberg 500/535/590/835, Remington 870 and Winchester 1200/1300 12 GA Shotguns. Stock Folds to the Left Side of Receiver New and Improved Pivot Housing Assembly With Trak LOCK System Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube. Provides Smooth Secure Stock Adjustments. Eliminates the Need for Secondary Locking Mechanisms With No Snag Points. Dual Sided QD Sling Attachment Point. Scorpion Recoil System With Scorpion T2 Recoil Pistol Grip Extended Scorpion Material to Reduce Recoil and Discomfort to the Shooter?s Hand and Thumb and Eliminates the Felt Punch of the Recoil. .Scorpion X2 Recoil Pad With Sure-Grip Texture Is Non-Slip, Removable. Increased Thickness for Recoil Absorption of Heavy Loads Not Affected by Chemicals. Securely Fasten your ATI Tactical Stock or Rear Pistol Grip with no Specialized Tools and it is Angled, Self-Aligning Dovetail Locking System for Easy Secure Installation. Additional Spacer for when Sling Mount is Not in use. Removable/Adjustable Cheek rest System. Elongated Design to Fit All Users. Includes Tall Cheekrest with 1 ¼" of Adjustment. Includes Short Cheekrest with ½" of Adjustment. Six Degree Drop Tube Adapter for Recoil Comfort. Mounting Hardware Included. Made From DuPont Extreme Temperature Glass Reinforced Polymer. Manufactured in the USA. ATI Limited Lifetime Warranty.

Fits: Most 12/20 gauge Maverick 88, Mossberg 500/535/590/835, Remington 870 and Winchester 1200/1300 12 GA, Winchester 120 Ranger Pump-Action Shotguns. Does Not Fits Winchester SXP Model.

Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).
 
$ 109.99/ Each Click to view this Product
-
-
  Winchester SXP Rear Pistol Grip 12/20 Gauge
Winchester SXP 12/20 gauge shotgun rear pistol grip, tactical non-slip textured pistol-grip. This ati shotgun pistol grip has recoil reduction material QD sling attachment point at the rear of the grip. Comes with universal mount system fits most Mossberg 500/535/590/835, Maverick 88, Remington 870/887, Winchester SXP, FNH USA P-12, Savage Stevens 320, TriStar Raptor  Pump-Action 12 GA Shotguns. Pistol grip securely fasten to your tactical shotgun with no specialized tools. Adapters mounts included for all supported models in one package and all mounting hardware included. Made from Dupont extreme reinforced polymer. Manufactured in the USA. ATI limited lifetime warranty.

Fits: Most 12/20-Guage Mossberg 500, 590, 590A1, 590M, 505, 510, 535, 835, and Maverick 88 models, Remington 870/887/7400, Winchester SXP, FNH USA P-12, Most Savage Stevens 320 prior to 2016, TriStar Raptor, Charles Daly 301 Pump-Action Field Shotgun 12 ga Pump-Action Shotguns. Note Grip Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).

Note: On Some (Newer Models) Savage Stevens 320 They have made changes to there trigger guard and it is thicker in the back you may need are new adaptor item # 320-2556 click here.

Fit Note: Winchester 1200/1300 12ga shotgun models you will need to purchase an additional Winchester 1200/1300 adaptor item # A.5.10.2558, click here for the adaptor.

We Recommend A Single Point QD Bungee Sling To Go With The Rear Pistol Grips QD Sling Mount A.5.10.2542 or PVC-GB507B.
$ 47.99/ Each Click to view this Product
-
-
  Winchester 1200/1300 Forend Wrench Removal Tool
This aftermarket Winchester 1200,1300 model shotgun 12 gauge forend wrench removal tool for Winchester shotguns allows you to disassemble and install a new tactical shotgun forend fast and easily. The shotgun forearm removal tool slides over the Winchester 1200 or 1300 magazine tubes into the slots on the forend nut, and you simply unscrew the forend nut and slide your forearm off the shotgun magazine tube. You can now change to the desired upgrade forend. This shotgun forend removal tool is specifically designed for Winchester shotguns. The forend removal tool is precision CNC machined from military type III hard anodized aluminum and features a checkered none-slip grip and laser etched lettering. This mag socket shotgun forend wrench removal tool for Winchester 1200-1300 shotguns is proudly made in the USA with an ATI limited lifetime warranty.

Fits: 12 Ga Mossberg 500/535/550/590/835 and Winchester 1200/1300 Shotguns Forend Nuts. Does not fit the SXP.
$ 19.95/ Each Click to view this Product
-
-
  Winchester 70 Long Action Scope Mount Base Weaver/Picatinny
This aftermarket Winchester 70 long action scope mount base is compatible with Picatinny or Weaver scope rings and fits most short action Winchester 70 long action model rifles. The Picatinny rail scope mount cross slots run the full length of the base rail to give you flexibility mounting scope, red dot sight or other optics and accessories to your Winchester 70 long action rifle. Scope mount rail is CNC machined from T-6160 aircraft aluminum and tapered at tip and tail eliminates sharp edges. Mounting screws included. limited lifetime warranty.
$ 19.99/ Each Click to view this Product
-
-
  Winchester Model 1300/1200 Tactical Conversion Kit-12 GA
The aftermarket upgrade Winchester Model 1300/1200 tactical conversion kit for 12 gauge shotguns features top-folding stock, shotgun tactical forend with picatinny rail package, shell holder for stock and steel heat shield. This shotgun tactical conversion kit makes your Winchester Model 1300/1200 compact for transport and carry and can be fired in opened or folded position. Sling Swivel Stud Included on stock made from DuPont® Extreme Reinforced Polymer. ATI Limited Lifetime Warranty Made in the USA.

Note Fit: Most 12-Gauge Mossberg 500/535/590/835, Remington 870, & Winchester 1200/1300 12-Gauge, Winchester 120 Ranger Pump-Action Shotguns. Adapter mounts for All Supported Models Included. Note: 12 Gauge Only, Does Not Fit 20 or .410 Gauge Shotguns. Mossberg forends require a 6 3/4" slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4" slide action tube. Heat shield Does Not Fit Any Vented Rib Barrel Models You would have to change your barrel. Does Not Fits Winchester SXP Model.

*The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) All Remington 870 Forends. (3) Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product. Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns. Each Heatshield should be fit with care to protect the barrel per instructions. You are responsible for any damage caused by installation.
$ 159.99/ Each Click to view this Product
-
-
  Winchester 70 Short Action Scope Mount Base Weaver/Picatinny
This aftermarket Winchester 70 short action scope mount base is compatible with Picatinny or Weaver scope rings and fits most short action Winchester 70 S/A model rifles. The Picatinny rail scope mount cross slots run the full length of the base rail to give you flexibility mounting scope, red dot sight or other optics and accessories to your Winchester 70 short action rifle. Scope mount rail is CNC machined from T-6160 aircraft aluminum and tapered at tip and tail eliminates sharp edges. Mounting screws included. limited lifetime warranty.
$ 19.99/ Each Click to view this Product
-
-
  Winchester 1300/1200 Folding Stock and Forend In Destroyer Gray
This ATI Winchester 1300/1200 stock and forend package with shell carrier in destroyer gray looks great! and fits most Winchester 1200/1300 model 12 GA Pump action Shotguns. Tactical conversion kit comes with one six position adjustable side folding TactLite shotgun stock with recoil system, tactical shotgun forearm/forend with picatinny rail package and a TactLite stock shotgun shell carrier. The tactical shotgun stock is six-position adjustable and can be side-folding to the Left of the receiver and fired from folded position. The Trac lock system eliminates horizontal and vertical movement of the stock on the buffer tube and provides smooth secure stock adjustments. The stock has built in dual sided QD sling attachment points and removable adjustable cheek rest system designed to fit all users. Stock forend and buffer tube is made from DuPont extreme temperature glass reinforced polymer sratchproof and weatherproof. The X1 recoil reducing pistol grip has sure-grip texture so recoil impact is absorbed and reduces the challenge to reacquire the target by minimizing the muzzle lift. The stocks X2 recoil reducing butt-pad 1 1/4" thick pad so recoil impact is absorbed and eliminates the felt punch of recoil you can shoot any load size with no pain transfer to the shooter and it is not affected by chemicals or extreme temperatures. Stock shell carrier holds five 12 gauge shotgun shells and mounts to the cheek rest while still allowing the adjustment of the cheek rest. Can be added to either side of the stock. This stock kit is fast and easy to install and includes all adapters for all supporting shotgun models with included mounting hardware. ATI limited lifetime warranty made in the USA.

Note Fits: Most Maverick 88, Mossberg 500/535/590/835, Remington 870, and Winchester 1200/1300 12 GA, Winchester 120 Ranger Pump-Shotguns. Does Not Fits Winchester SXP Model.

Note: Mossberg forends require a 6 3/4" slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4" slide action tube. *The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.

Note: We Suggest Tactical QD Single Point Bungee Sling To Go With This Stock Item # PVC-GB507B
$ 159.99/ Each Click to view this Product
-
-